Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Spectrophotometric determination of platinum(IV) in alloys, complexes, environmental, and pharmaceutical samples using 4-[N,N-(diethyl)amino] benzaldehyde thiosemicarbazone(2010) Naik, P.P.; Karthikeyan, J.; Nityananda Shetty, A.N.4-[N,N-(Diethyl)amino] benzaldehyde thiosemicarbazone (DEABT) is proposed as an analytical reagent for the spectrophotometric determination of platinum(IV). The DEABT forms 1:2 yellow complex with Pt(IV), which is sparingly soluble in water and completely soluble in water-ethanol-DMF medium. The Pt(IV)-DEABT complex shows maximum absorbance at 405 nm. Beer's law is valid up to 7.80 ?g cm-3, and optimum concentration range for the determination of platinum(IV) is 0.48-7.02 ?g cm-3. The molar absorptivity and Sandell's sensitivity of the method are found to be 1.755 × 104 dm3 mol-1 cm-1 and 0.0012 ?g cm-2, respectively. The relative error and coefficient of variation (n=6) for the method does not exceed ±0.43% and 0.35%, respectively. Since the method tolerates a number of metal ions commonly associated with platinum, it can be employed for the determination of platinum in environmental samples, pharmaceutical samples, alloys, catalysts, and complexes. The method is rapid as the Pt(IV)-DEABT complex is soluble in water-ethanol-DMF medium and not requiring any time consuming extraction method for the complex. © 2010 Springer Science+Business Media B.V.Item Analytical properties of p-[N,N-bis(2-chloroethyl)amino]benzaldehyde thiosemicarbazone: Spectrophotometric determination of palladium(II) in alloys, catalysts, and complexes(2011) Karthikeyan, J.; Parameshwara, P.; Nityananda Shetty, A.N.p-[N,N-bis(2-chloroethyl)amino]benzaldehyde thiosemicarbazone (CEABT) is proposed as a new, sensitive, and selective analytical reagent for the spectrophotometric determination of palladium(II). The reagent reacts with palladium(II) in the pH range 1-2 to form a yellow-colored complex. Beer's law is obeyed in the concentration range up to 2.64 ?g cm-3. The optimum concentration range for minimum photometric error as determined by Ringbom's plot method is 0.48-2.40 ?g cm-3. The yellowish Pd(II)-reagent complex shows a maximum absorbance at 395 nm, with molar absorptivity of 4.05 × 104 dm3 mol-1 cm-1 and Sandell's sensitivity of the complex from Beer's data, for D= 0.001, is 0.0026 ?g cm-2. The composition of the Pd(II)-CEABT reagent complex is found to be 1:2 (M-L). The interference of various cations and anions in the method were studied. The proposed method was successfully used for the determination of Pd(II) in alloys, catalysts, complexes, water samples, and synthetic alloy mixtures with a fair degree of accuracy. © 2010 Springer Science+Business Media B.V.Item A rapid extractive spectrophotometric determination of copper(II) in environmental samples, alloys, complexes and pharmaceutical samples using 4-N,N(dimethyl)amino]benzaldehyde thiosemicarbazone(2011) Karthikeyan, J.; Naik, P.P.; Nityananda Shetty, A.N.4-[N,N-(Dimethyl)amino]benzaldehyde thiosemicarbazone (DMABT) is proposed as an analytical reagent for the extractive spectrophotometric determination of copper(II). DMABT forms yellow colored complex with copper(II) in the pH range 4.4-5.4. Beer's law is obeyed in the concentration range up to 4.7 ?g mL -1. The optimum concentration range for minimum photometric error as determined by Ringbom plot method is 1.2-3.8 ?g mL-1. The yellowish Cu(II)-DMABT complex shows a maximum absorbance at 420 nm, with molar absorptivity of 1.72 × 104dm3 mol-1 cm-1 and Sandell's sensitivity of the complex obtained from Beer's data is 0.0036 ?g cm-2. The composition of the Cu(II)-DMABT complex is found to be 1:2 (M/L). The interference of various cations and anions in the method were studied. Thus the method can be employed for the determination of trace amount of copper(II) in water, alloys and other natural samples of significant importance. © 2010 Springer Science+Business Media B.V.Item Dual colorimetric receptor with logic gate operations: Anion induced solvatochromism(Royal Society of Chemistry, 2014) Kigga, M.; Swathi, N.; Manjunatha, J.R.; Das, U.K.; Nityananda Shetty, A.N.; Trivedi, D.R.A receptor R1 was designed and synthesised for colorimetric detection of F- ions as well as Cu2+ ions via intramolecular charge transfer mechanism. Upon addition of F- ions in dry DMSO, the color of the receptor R1 changed from pale yellow to blue. The receptor showed a unique property of solvatochromism by displaying different coloration with different solvents only in the presence of F- ions, which were applied to determine the percentage composition of binary solvent mixtures. The receptor R1 was able to detect Cu2+ ions colorimetrically where it exhibited a color change from pale yellow to orange-red. In addition, the receptor was subjected to molecular logic gate applications, wherein it showed 'ON-OFF' switching operations. © 2014 The Royal Society of Chemistry and the Centre National de la Recherche Scientifique.