Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item The inhibition efficiency of Glycyl Glycine (GG) on the corrosion behaviour of Al-SiC(p) composite in 0.01, 0.1 and 1.0 N HCl solution has been investigated in the temperature range 30°-50°C using polarization techniques. The results indicate that GG acts as an anodic inhibitor and is chemisorbed following Temkin's model. The inhibitor efficiency increases with increase in inhibitor concentration and also with increase in temperature for a given inhibitor concentration. © 2006 SAEST.(Glycyl glycine as corrosion inhibitor for aluminium silicon carbide composite in hydrochloric acid) Rao, S.A.; Padmalatha; Nayak, J.; Nityananda Shetty, A.N.2006Item Corrosion inhibition of 6061 Al-15 vol. pct. SiC(p) composite and its base alloy in a mixture of sulphuric acid and hydrochloric acid by 4-(N,N-dimethyl amino) benzaldehyde thiosemicarbazone(2011) Geetha, G.M.; Nayak, J.; Nityananda Shetty, A.N.The corrosion inhibition characteristics of 4-(N,N-dimethylamino) benzaldehyde thiosemicarbazone (DMABT) on the corrosion behavior of 6061 Al-15 vol. pct. SiC(p) composite and its base alloy were studied at different temperatures in acid mixture medium containing varying concentrations of hydrochloric acid and sulphuric acid using Tafel extrapolation technique and ac impedance spectroscopy (EIS). The effect of inhibitor concentration, temperature and concentration of the acid mixture media on the inhibitor action was investigated. It was found that inhibition efficiencies increase with the increase in inhibitor concentration, but decrease with the increase in temperature and with the increase in concentration of the acid media. Thermodynamic parameters for dissolution process were determined. The adsorption of DMABT on both the composite and base alloy was found to be through physisorption obeying Freundlich adsorption isotherm. © 2010 Elsevier B.V. All rights reserved.Item The corrosion inhibition of maraging steel under weld aged condition by 1(2E)-1-(4-Aminophenyl)-3-(2-Thienyl)prop-2-en-1-one in 1.5 M hydrochloric acid medium(Springer New York LLC barbara.b.bertram@gsk.com, 2012) Sanatkumar, B.S.; Nayak, J.; Nityananda Shetty, A.N.The influence of 1(2E)-1-(4-Aminophenyl)- 3-(2-Thienyl)prop-2-en-1-one (ATPI) on the corrosion behavior of weld aged maraging steel in 1.5 M hydrochloric acid was studied by potentiodynamic polarization method and AC impedance (EIS) technique at different temperatures. The results showed that the inhibition efficiency of ATPI increased with the increase in the concentration of inhibitor and decreased with the increase in temperature. ATPI acts as a mixed type inhibitor without affecting the mechanism of the hydrogen evolution reaction or iron dissolution. The adsorption of ATPI on a weld aged maraging steel surface obeys the Langmuir adsorption isotherm equation. Both activation and thermodynamic parameters were calculated and discussed. ATPI inhibits the corrosion through both physisorption and chemisorption on the alloy surface. The surface morphology of the weld aged maraging steel specimens in the presence and the absence of the inhibitors was studied by the respective SEM images. © ACA and OCCA 2011.Item Inhibition effect of adsorption layer of 1-phenyl-4-(4-nitrophenyl) thiosemicarbazide on the corrosion of 18 Ni 250-grade welded maraging steel in 1.0 M hydrochloric acid medium(Kluwer Academic Publishers, 2015) Kumar, P.; Nityananda Shetty, A.N.The thiosemicarbazide derivative, 1-phenyl-4-(4-nitrophenyl)thiosemicarbazide (PNPT), was synthesized and its inhibiting action on the corrosion of welded maraging steel in 1.0 M hydrochloric acid was investigated by electrochemical methods of potentiodynamic (Tafel) polarization and electrochemical impedance spectroscopy. The inhibitor, PNPT, acted essentially as a mixed-type inhibitor with predominant cathodic action. The inhibition efficiency increased with the increase in inhibitor concentration. An inhibition efficiency of about 86 % was exhibited at 30 °C, which decreased with the increase in the temperature. The adsorption of the inhibitor layer formed was through predominant physical adsorption process. © 2014 Springer Science+Business Media Dordrecht.