Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
10 results
Search Results
Item Exergy Analysis of a Triangular Duct Solar Air Heater with Square Ribs(Springer Science and Business Media Deutschland GmbH, 2022) Nidhul, K.; Kumar, S.; Yadav, A.K.; Anish, S.The awareness about limited energy resources has urged the scientific community to scrutinize the energy conversion devices and optimize existing limited resources. In this analytical study, the exergetic performance analysis of a triangular cross-section square ribbed solar air heater (SAH) is compared with a conventional SAH. Reynolds number (Re) and temperature rise parameter (∆T/G) are varied, and their effect on exergetic efficiency is quantified. For the present study, maximum exergetic efficiency for the present study is obtained for non-dimensionalized rib height (e/D) of 0.05 and non-dimensionalized rib pitch (P/e) of 10. The optimum combinations of roughness parameters are interpreted through plots to design turbulators for triangular cross-section solar air heaters. © 2022, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.Item Critical review of ribbed solar air heater and performance evaluation of various V-rib configuration(Elsevier Ltd, 2021) Nidhul, K.; Yadav, A.K.; Anish, S.; Kumar, S.The low heat transfer rate in a flat plate solar air heater (SAH) is due to the development of a laminar sub-layer near the heated absorber plate. Owing to this, the plate temperature rises substantially, instigating losses and thus reducing the efficiency. Extensive research has been carried out to mitigate this problem, of which passive technique emerged to be a promising solution. The passive method involves the application of fins/turbulators/ribs on the surface where the boundary layer develops so that it breaks the same. Various profiles and configurations of the ribs ranging from transverse to inclined and continuous to discrete have been presented concisely. Correlations on Nusselt number (Nu) and friction factor (f) for different rib configurations have been summarized in order so that it can be accessed for future research. 3-D CFD analysis is carried out to gain insight into the flow pattern of various V-ribbed SAH, and with the help of streamlines and contours, the findings are established. Furthermore, various exergy destruction has been studied in detail for different V-rib configurations, namely– V-rib, multiple V-rib, and multiple V-rib with the gap, and analyzed in detail for prospective studies. Exergetic performance study of these rib configurations indicates that the multiple ribs and the multiple rib-gap combinations enhance exergetic efficiency (ηex) by 12% and 31.6%, respectively, in comparison to V-rib SAH. © 2021 Elsevier LtdItem Machine learning approach for optimization and performance prediction of triangular duct solar air heater: A comprehensive review(Elsevier Ltd, 2023) Nidhul, K.; Thummar, D.; Yadav, A.K.; Anish, S.This paper presents a comprehensive review of various kinds of distinct artificial roughness employed in rectangular and triangular duct solar air heaters to aid prospective researchers in finding a critical gap in the domain of solar air heaters. A Machine Learning (ML) model is developed using 72 distinct rib combinations compiled to 454 datasets and trained using an Artificial Neural Network (ANN) to predict the performance of ribbed triangular duct Solar Air Heater (SAH). The developed ML model predicts the data with an average deviation of <3%. Owing to reasonably accurate predictions, the same could be increased when more cases (geometric or operating parameters) are added to the databases by retraining the ANN. Further, a second law analysis of the rib configurations features collector efficiency and entropy generation variation with Re for various rib parameters. For the Re range of 4000 to 18000, optimum parameters such as rib height, pitch, chamfer angle, and inclinations are obtained for triangular duct SAH. This could help design engineers obtain the performance parameters of ribbed triangular duct SAH with other artificial roughness designs, possibly with a combination of different geometrical and operating parameters, without having to perform tests. © 2023 International Solar Energy SocietyItem Enhanced thermo-hydraulic performance in a V-ribbed triangular duct solar air heater: CFD and exergy analysis(Elsevier Ltd, 2020) Nidhul, K.; Kumar, S.; Yadav, A.; Anish, S.Computational fluid dynamics (CFD) and exergy analysis are conducted to investigate the impact of secondary flow produced by V-ribs on the overall performance of a triangular solar air heater (SAH) duct. For a fixed relative rib pitch (Rp = 10) and relative rib height (Rh = 0.05), the effect of rib inclination (?) is studied using CFD technique for varying Reynolds number (5000 ? Re ? 20000). Based on the CFD simulation results, empirical correlations capable of predicting Nu and f with an absolute variance of 8.7%, and 4.7%, respectively, are developed. Employing these correlations, exergetic performance analysis is carried out. Maximum effectiveness parameter (?) of 2.01 is obtained for ? = 45° at Re = 7500. The exergy analysis reveals that the entropy generated is lower for the ribbed triangular duct compared to the smooth duct with maximum enhancement in exergetic efficiency (?ex) as 23% for ? = 45°. The study is extended for the rectangular duct to compare the performance with the ribbed triangular duct SAH (? = 45°). Results show that ribbed triangular duct SAH (? = 45°) is superior over various configurations of the ribbed rectangular duct SAH at higher mass flow rates. © 2020 Elsevier LtdItem Efficient design of an artificially roughened solar air heater with semi-cylindrical side walls: CFD and exergy analysis(Elsevier Ltd, 2020) Nidhul, K.; Yadav, A.; Anish, S.; Arunachala, U.C.Solar air heater (SAH) with semi-cylindrical sidewalls and W-baffles is analyzed for energy and exergy efficiency in the turbulent flow regime. Computational fluid dynamics (CFD) analysis is carried out for a fixed baffle inclination (?) and varying the relative baffle height (Rh = e/D) and relative baffle pitch (Rp = P/D) in the range 0.046–0.115 and 0.46–1.15, respectively. For Reynolds number (5000 < Re < 17,500), the numerical methodology is substantiated using experimental and theoretical correlations obtained from the literature. Smaller vortices near the sharp corners are removed by rounding the sharp edges, allowing the flow of fluid from inside and horizontal walls of the duct towards the semi-cylindrical sidewalls. This increases the overall turbulent kinetic energy. A peak augmentation of 3.24 and 4.03 times is obtained for Nusselt number (Nu) and friction factor (f), respectively, in contrast to conventional SAH. With a maximum enhancement of 127% in the effectiveness parameter relative to smooth SAH, this novel SAH design is evidently energy efficient. Based on CFD results, new correlations are developed in terms of Rh and Rp, which predicts the values with an absolute deviation of 4% and 7.4%, respectively. With lower exergy destruction, maximum enhancement in thermal and exergetic efficiency is obtained as 40.7% and 95.4%, respectively, for the proposed SAH relative to conventional SAH. Upon comparison with ribbed rectangular duct SAH configurations, the present design with semi-cylindrical side walls outperforms at all flow Re. © 2020 International Solar Energy SocietyItem Influence of Rectangular Ribs on Exergetic Performance in a Triangular Duct Solar Air Heater(American Society of Mechanical Engineers (ASME), 2020) Nidhul, K.; Kumar, S.; Yadav, A.; Anish, S.Several artificial roughness (ribs) configurations have been used in flat plate solar air heaters (SAH) in recent years to improve their overall performance. In the present work, energy and exergy analyses of rectangular ribs in a triangular duct SAH for varying relative rib heights (e/D = 0.02-0.04), relative rib pitches (P/e = 5-15), and rib aspect ratios (e/w = 0.5-4) are evaluated and compared with smooth SAH. The analysis reveals that the entropy generated due to heat transfer is lower for the ribbed triangular duct compared to the smooth duct. It is also observed that the width of the rib plays a crucial role in minimizing heat losses to the environment. A maximum reduction of 43% and 62% in exergy losses to the environment and exergy losses due to heat transfer to the fluid is achieved, respectively, with a rib aspect ratio (e/w) of 4 compared to the smooth plate. It is found that in contrast to the smooth plate, ribs beneath the absorber plate effectively improves thermal and exergetic efficiency. Maximum enhancement of 36% and 17% is obtained in exergetic efficiency (?ex) and thermal efficiency (th), respectively, for e/w = 4, P/e = 10 and e/D = 0.04. Results also show the superiority of the ribbed triangular duct over the ribbed rectangular duct for an application requiring compact SAH with a higher flowrate. © 2020 by ASME.Item Computational and experimental studies on the development of an energy-efficient drier using ribbed triangular duct solar air heater(Elsevier Ltd, 2020) Nidhul, K.; Kumar, S.; Yadav, A.; Anish, S.Triangular duct cross-section is introduced for solar air heater (SAH) of an indirect type of solar dryer (ITSD). Using computational study, the thermo-hydraulic performance of triangular duct SAH with inclined ribs for varying rib inclination (30° < ? < 75°) in the turbulent flow regime (5000 < Re < 17500) is studied. With the rib configuration providing maximum thermos-hydraulic performance, a ribbed rectangular duct SAH is designed, and the performance of the same is compared to the former for similar heat input. Results show that the ribbed (? = 45°) triangular duct has 17% higher effectiveness compared to the latter and 79% when compared to smooth SAH. Ribs in triangular duct solar air heater facilitate the increase in temperature even in the core of the duct, delivering the air at 6 K additional temperature relative to a rectangular ribbed duct for same heat input and flow Re. The superiority of the ribbed triangular SAH is further confirmed by studying the drying characteristics of Okra and two variants of banana, namely Nendran and Robusta for the maximum temperature obtained at the outlet of the respective SAH. Various thin layer drying models available in the literature were analyzed, and Modified page model represented the drying behaviour with R2 = 0.99. For ITSD, ribbed triangular duct SAH exhibits a maximum of 60.3% reduction in moisture ratio with a maximum increase of 97.9% increase in average values of diffusivity coefficient confirming that it is an energy-efficient design for an ITSD. © 2020 International Solar Energy SocietyItem Performance evaluation of novel tapered shell and tube cascaded latent heat thermal energy storage(Elsevier Ltd, 2021) B.V., B.V.; Nidhul, K.; Gumtapure, V.Geometric design of the storage system plays a vital role in the enhancement of heat transfer rate and thereby in the advancement of latent heat thermal energy storage (LHTES) technology. The present study numerically compares the heat transfer performance of tapered type shell and tube cascaded latent heat storage (CLHS) model with that of the conventional cylindrical CLHS model with special emphasis on melting rate at the slowest melting portions (bottom) of the shell and tube unit. Thermal properties like transition temperature, latent, and specific heat of the three organic PCMs OM 42, OM 46, and OM 48 have been obtained using differential scanning calorimetry (DSC), and the same is employed in the 2-D numerical simulation carried out using enthalpy-porosity method. Tapered CLHS unit exhibited superior performance owing to stronger natural convective currents demonstrated via streamlines, velocity, temperature and mass fraction contours. In tapered unit, 17.6% higher mean power is obtained for same volume of PCMs in cylindrical unit. In contrast, the mean power of the discharging process for a tapered type is 2.4% lesser than cylindrical type CLHS. The outcomes highlight that the tapered type CLHS model utilizes convective heat transfer, effectively enhancing the melting rate of PCM without any additional structural configurations such as fins. Hence is also economically justifiable for higher energy storage for the same volume compared to conventional cylindrical CLHS units. © 2020 International Solar Energy SocietyItem Thermo-hydraulic and exergetic performance of a cost-effective solar air heater: CFD and experimental study(Elsevier Ltd, 2022) Nidhul, K.; Yadav, A.K.; Anish, S.; Arunachala, U.C.An experimental and computational fluid dynamics (CFD) study is carried out to investigate the impact of secondary flow strengthening the thermo-hydraulic performance of discrete multiple inclined baffles in a flat plate solar air heater (SAH) with semi-cylindrical sidewalls. Initially, for a fixed relative baffle height (Rh = 0.1), the relative baffle pitch (Rp) for continuous baffles is varied in the range of 0.6–1 to obtain the optimum baffle pitch for 6000 p. A maximum thermo-hydraulic performance of 2.69 is obtained for the gap at the trailing apex. The proposed design has a higher collector efficiency, 55–70%, compared to the ribbed rectangular SAH design exhibiting 30–55%. With lower exergy losses, the present SAH design has higher exergetic efficiency (1.5%–2.2%)than ribbed rectangular SAH (0.9%–1.7%) for the range of Re studied. Further, at low Re, the present SAH design has a higher coefficient of performance, indicating that it is cost-effective than ribbed rectangular SAH designs. © 2021 Elsevier LtdItem Energy and exergy analysis of solar air heater with non-uniform porous medium under varying solar intensity and radiation effects: a 3-D CFD study(Taylor and Francis Ltd., 2025) Nidhul, K.; Joshi, A.; Yadav, A.K.; Anish, S.The effect of a thin porous layer on the performance of a solar air heater (SAH) is investigated for both uniform and non-uniform configurations. 3-D computational fluid dynamic (CFD) simulations of SAH are performed for turbulent flow, and the transient performance with porous medium configurations is studied. A discrete-ordinate (D-O) model is employed, and diurnal variations of solar heat flux and inlet air temperature variations are considered in this study. The porous medium above the absorber plate significantly enhances the SAH's thermo-hydraulic performance parameter (THPP). The proposed configuration reduces the irreversibility in heat transfer and the possible hot spots that could occur when ribs are employed as artificial roughness, thereby enhancing the Nusselt number (Nu). The highest increment in Nu is obtained as 7.5 times, leading to maximum enhancement in THPP by 60% for descending porous medium compared to uniform porous medium configuration. Further, from the exergy analysis, the descending porous medium reported higher collector efficiency (66-70%). Owing to higher exergy gain and lower exergy losses, the energetic efficiency of the descending porous configuration is higher than the uniform porous configuration. Both thermo-hydraulic and exergy performance increases due to conduction and radiation within the porous medium apart from convection. © 2025 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.