Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Filters

2016 - 20182

Settings

Author: search.filters.author.Nayak, U.V.Subject: search.filters.subject.Cooling curve analysis

Search Results

Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Wetting Behavior and Heat Transfer of Aqueous Graphene Nanofluids
    (Springer New York LLC barbara.b.bertram@gsk.com, 2016) Nayak, U.V.; Prabhu, K.N.
    Aqueous graphene nanofluids having concentrations 0.01, 0.1, and 0.3 vol.% were used as heat transfer media during quenching of ISO 9950 inconel alloy probe. Contact angle measurements were carried out to assess the wettability of graphene nanofluids. Nanofluids showed better wettability compared to base water with over 16% reduction in their contact angles. The cooling performance of the quench media was assessed by cooling curve analysis during quenching of an instrumented inconel probe from 860 °C into the quench medium. Recorded temperature readings showed longer vapor phase stage during quenching with nanofluids. The severity of nanofluids was found to be lower relative to water. During quenching with nanofluids, the estimated spatiotemporal heat flux transients at the metal/quenchant interface showed that more heat was removed during the vapor phase stage of cooling. The present study brings out the possibility of using stable water-graphene nanoplatelet suspensions for quench heat treatment of steel components requiring cooling severity between water and oil/polymer quenchants. © 2016, ASM International.
  • No Thumbnail Available
    Item
    Effect of section thickness on heat transfer during quenching in vegetable oils
    (ASTM International, 2018) Nayak, U.V.; Prabhu, K.N.
    In the present work, mineral, sunflower, karanja, and neem oil were used as quench media. 304 stainless steel probes with diameters of 25 mm and 50 mm were quenched in these oils to assess the effect of section diameter on heat transfer during quenching. Cooling curve analysis was carried out by instrumenting the probes at various locations with thermocouples. The heat extraction ability of oil quench media was quantified using an inverse heat conduction method. Thermal data and the predicted hardness values showed the suitability of nonedible vegetable oils as potential quenchants to heat treat steels. The predicted hardness was higher during quenching in karanja oil compared to other oil media. © © 2018 by ASTM International.