Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
6 results
Search Results
Item Improvement in the Properties of Red Soil Using Granulated Blast Furnace Slag(Springer Science and Business Media Deutschland GmbH, 2022) Preetham, H.K.; Nayak, S.; Jagapur, P.In the current study, an attempt is made to improve the geotechnical properties of red soil using industrial by-product: Granulated-Blast Furnace Slag (GBFS). Red soil is distributed over large part of the peninsular region in India. Red soil could be effectively stabilized to yield better strength characteristics. GBFS is the primary by-product of the iron and steel industry. Red soil was replaced with varying percentages of admixture (GBFS) by dry weight of soil (5, 10, 15, 20 and 30%). Basic geotechnical properties like specific gravity, Atterberg limits, compaction, unconfined compressive strength (UCS) and triaxial compression test, were performed on the red soil as well as on the mixes as per Indian Standard Codal provisions. From the UCS test results, the optimum percentage of replacement of 15% was found. It was observed that on replacement with admixtures, the liquid limit was found to decrease which reduces the compressibility. The presence of CaO in GBFS has improved the shear strength and shear strength parameters of soil. Thus utilization of granular industrial by-product (GBFS) has proven beneficial in geotechnical structures. © 2022, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.Item Assessment of the Geotechnical Properties of Red Earth Stabilized Using Quarry Dust and Cement(Springer Science and Business Media Deutschland GmbH, 2022) Nayak, S.; Preetham, H.K.; Prakash, S.D.The present investigation aims at improving the engineering properties of red earth by incorporating quarry dust (QD) and analyze the results thus obtained by conducting a comparative study with the basic soil. Red earth is widely spread over a large part of peninsular India. Red earth/red soil could yield better results by the addition of rough-textured granular quarry dust and a hydraulic binder like cement. QD is the output from the rubble crushing units. Red earth was replaced with different proportions of quarry dust by dry mass of the soil: QD (5–30%, with an increment of 5%) with cement (2–6%) for the optimum QD-soil mix. The geotechnical properties like specific gravity, consistency limits, compaction, unconfined compressive strength (UCS), and triaxial compression test were performed on the red earth as well as on the mixes as per Indian Standard Codal provisions. UCS test results conclude that an optimum percentage of replacement of red earth by QD is 10% which yielded maximum strength than other mixes. It was observed that on replacement of red earth by granular quarry dust and cement, the shear strength properties and other geotechnical properties were improved. Thus, the utilization of granular industrial by-products has proven to be socially and economically beneficial. © 2022, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.Item Influence of Granulated Blast Furnace Slag and Cement on the Strength Properties of Lithomargic Clay(Springer India sanjiv.goswami@springer.co.in, 2017) C. Sekhar, D.C.; Nayak, S.; Preetham, H.K.Utilizing industrial byproducts in soil stabilization benefits the economic, environmental and social benefits. Granulated blast furnace slag is a byproduct of iron and steel industry having oxides similar to that of cement but in different proportions. This study describes experimental results achieved by the use of granulated blast furnace slag (GBFS) and cement in stabilizing lithomargic clay for geotechnical applications. Soil was replaced by GBFS in percentages of 10, 15, 20, 25, 30, 35, 40, 45, 50% and cement of 2, 4, 6, and 8% by dry weight of soil is added. Various experimental studies like specific gravity, Atterberg limits, compaction, UCS, CBR and triaxial compression test, were performed on samples to understand the effect of these mixes on their few index and strength properties. The study also includes an investigation on a combination of optimum percentage of GBFS with varying percentage of cement and lime on their shear parameters. The study result shows significant improvement in the strength properties of the mixes. Hence it can be concluded that lithomargic clay stabilized with GBFS and cement/lime satisfy the strength requisite to be employed in the numerous geotechnical applications. © 2017, Indian Geotechnical Society.Item Utilization of granulated blast furnace slag and cement in the manufacture of compressed stabilized earth blocks(Elsevier Ltd, 2018) C. Sekhar, D.; Nayak, S.This study involves the investigation on utilization of granulated blast furnace slag (GBFS) and cement in the manufacture of compressed stabilized earth blocks (CSEB). Two locally available soils from Dakshina Kannada district, Karnataka, India were tested for their index and strength properties with replacement of granulated blast furnace slag (GBFS). An optimum percentage of replacement of GBFS was established and then varying percentages of cement was added for the production of compressed stabilized earth blocks (CSEBs). This stabilized soil was used for the manufacture of blocks of size 305 mm × 143 mm × 105 mm. All the blocks were cast to a target density, followed by the curing for 28 days. The blocks were subjected to compression test and water absorption test according to Indian Standard (IS) specifications. The test results showed that the CSEBs prepared with GBFS and cement can be utilized in masonry for load bearing wall construction. A small percentage of cement is sufficient for manufacturing the CSEBs when optimum GBFS content is replaced with that of soil, thereby reducing the energy consumption. © 2018 Elsevier LtdItem Experimental Studies and its Application using PLAXIS-2D for Lithomargic Clay Stabilized by GBFS and Lime(Springer Science and Business Media Deutschland GmbH, 2021) Mahesh Bhat, K.; Nayak, S.Lithomargic clay is found along the Eastern and Western coasts of Southern India. Presence of weak soils like lithomargic clay below the foundations, cause serious problems when they come in contact with water, and non-availability of stronger fill materials locally, to replace them is a challenge to foundation engineers. An attempt has been made in this paper to improve the strength of lithomargic clay by chemical stabilization using Lime and Granulated Blast Furnace Slag (GBFS). Disposal of massive amounts of industrial waste, GBFS, has become an environmental problem and utilization of the same for soil stabilization would be a sustainable solution for disposal. To optimize the use of lime and understand the mechanism behind the gain in strength, laboratory experiments were conducted on lithomargic clay, by replacing it with varying amounts of GBFS and addition of different percentages of lime. The optimum lime and GBFS content were found to be 4% and 20% respectively. Further optimization was done by mixing lithomargic clay with 4% lime and 20% GBFS and a significant strength improvement was observed. SEM and XRD analyses were conducted on the stabilized soil and the increase in strength was established from structural changes and formation of compounds like CSH and CASH. PLAXIS 2D was used to understand the settlement behavior of both the unstabilized and stabilized soils below strip foundations of varying widths. From load settlement analysis, it was observed that the net allowable pressure increases with increase in GBFS content and further increases with addition of lime to soil stabilised with optimum GBFS. © 2021, The Author(s), under exclusive licence to Springer Nature Switzerland AG.Item Experimental Investigation and Performance Evaluation of Lithomargic Clay Stabilized with Granulated Blast Furnace Slag and Calcium Chloride(Springer Science and Business Media Deutschland GmbH, 2022) Lakkimsetti, B.; Nayak, S.South-western coast of India has vast deposits of highly problematic silty soil normally referred to as lithomargic clay in the literature. This problematic silty soil is characterized by its high sensitivity to moisture content with high erosion potential and low shear strength. This paper attempts to address this problem by chemical stabilization of lithomargic clay using Calcium chloride (CaCl2) and an industrial by-product obtained from the iron industry, i.e., granulated blast furnace slag (GBFS). Disposing of huge quantities of GBFS poses a severe impact on the environment. GBFS has high pozzolanic activity, and utilizing it for the stabilization of soils would be a sustainable and eco-friendly solution. To optimize CaCl2 and GBFS contents for achieving better geotechnical properties of the stabilized soil and to understand the mechanism governing the improvement, a series of laboratory experiments were performed on lithomargic clay by stabilizing it with different amounts of CaCl2 and GBFS. Optimum CaCl2 and GBFS contents obtained from the laboratory experiments are 6% and 20%, respectively, and a significant increase in strength was achieved with this optimized mix. Scanning electron microscope and X-ray diffraction analyses were carried out on the powdered samples of the treated soil, and the improvement in strength was justified through the microstructural changes observed due to the formation of cementitious compounds. Response of strip footings lying on unstabilized, and stabilized soils was analyzed using PLAXIS-2D. Numerical simulations showed a significant increase in the allowable bearing pressure with stabilization of lithomargic clay with GBFS and CaCl2. © 2022, The Author(s), under exclusive licence to Springer Nature Switzerland AG.