Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
7 results
Search Results
Item Corrosion of aged and annealed 18 Ni 250 grade maraging steel in phosphoric acid medium(2010) Poornima, T.; Nayak, J.; Nityananda Shetty, A.N.The corrosion behavior of aged and annealed sample of 18 Ni 250 grade maraging steel was investigated in phosphoric acid over a range of acid concentration and solution temperature by using electrochemical techniques like Tafel extrapolation and electrochemical impedance spectroscopy. The studies have revealed that the corrosion rate of both aged and annealed samples increase with increase in temperature and increase in concentration of phosphoric acid in the medium. The corrosion rate of annealed sample is found to be less than that of aged sample. The thermodynamic parameters like activation energy, enthalpy of activation and entropy of activation for the corrosion process were calculated. © 2010 by ESG.Item 3,4-Dimethoxybenzaldehydethiosemicarbazone as corrosion inhibitor for aged 18 Ni 250 grade maraging steel in 0.5 M sulfuric acid(2011) Poornima, T.; Nayak, J.; Nityananda Shetty, A.N.The corrosion inhibition of the aged 18 Ni 250 grade maraging steel in 0.5 M sulfuric acid by 3,4-dimethoxybenzaldehydethiosemicarbazone(DMBTSC) has been investigated by potentiodynamic polarization and electrochemical impedance spectroscopy(EIS) techniques. The inhibition efficiency increased with the increase in inhibitor concentration and decreased with the increase in temperature. Polarization curves indicated mixed type inhibition behavior affecting both cathodic and anodic corrosion currents. The thermodynamic parameters of corrosion and adsorption processes were evaluated. The adsorption of DMBTSC on the aged maraging steel surface was found to obey the Langmuir adsorption isotherm model, and the calculated Gibb's free energy values confirm the spontaneous adsorption. The results obtained by the two techniques were in good agreement. © 2010 Springer Science+Business Media B.V.Item Effect of 4-(N,N-diethylamino)benzaldehyde thiosemicarbazone on the corrosion of aged 18 Ni 250 grade maraging steel in phosphoric acid solution(2011) Poornima, T.; Nayak, J.; Nityananda Shetty, A.N.4-(N,N-diethylamino)benzaldehyde thiosemicarbazone (DEABT) was studied for its corrosion inhibition property on the corrosion of aged 18 Ni 250 grade maraging steel in 0.67M phosphoric acid at 30-50°C by potentiodynamic polarization, EIS and weight loss techniques. Inhibition efficiency of DEABT was found to increase with the increase in DEABT concentration and decrease with the increase in temperature. The activation energy Ea and other thermodynamic parameters (?Gads0, ?Hads0, ?Sads0) have been evaluated and discussed. The adsorption of DEABT on aged maraging steel surface obeys the Langmuir adsorption isotherm model and the inhibitor showed mixed type inhibition behavior. © 2011 Elsevier Ltd.Item 3-Methyl-4-amino-5-mercapto-1,2,4-triazole as corrosion inhibitor for 6061/Al-15 (vol-%) sic(p) composite in 0.5M sodium hydroxide solution(2011) Kumari, P.D.R.; Nayak, J.; Nityananda Shetty, A.N.3-Methyl-4-amino-5-mercapto-1,2,4-triazole (MAMT) was investigated for its inhibition action on the corrosion of 6061/Al - 15 (vol-%) SiC(p) composite in 0.5M sodium hydroxide solution at different temperatures by potentiodynamic polarization and electrochemical impedance spectroscopic techniques. The effect of inhibitor concentration, temperature and concentration of the corrosion medium on the inhibitor action was investigated. The inhibition efficiency increased with the increase in the concentration of inhibitor but decreased with the increase in temperature. Both thermodynamic and activation parameters were calculated and discussed. The adsorption of MAMT on the composite was found to be through physisorption obeying Langmuir's adsorption isotherm.Item The corrosion inhibition of maraging steel under weld aged condition by 1(2E)-1-(4-Aminophenyl)-3-(2-Thienyl)prop-2-en-1-one in 1.5 M hydrochloric acid medium(Springer New York LLC barbara.b.bertram@gsk.com, 2012) Sanatkumar, B.S.; Nayak, J.; Nityananda Shetty, A.N.The influence of 1(2E)-1-(4-Aminophenyl)- 3-(2-Thienyl)prop-2-en-1-one (ATPI) on the corrosion behavior of weld aged maraging steel in 1.5 M hydrochloric acid was studied by potentiodynamic polarization method and AC impedance (EIS) technique at different temperatures. The results showed that the inhibition efficiency of ATPI increased with the increase in the concentration of inhibitor and decreased with the increase in temperature. ATPI acts as a mixed type inhibitor without affecting the mechanism of the hydrogen evolution reaction or iron dissolution. The adsorption of ATPI on a weld aged maraging steel surface obeys the Langmuir adsorption isotherm equation. Both activation and thermodynamic parameters were calculated and discussed. ATPI inhibits the corrosion through both physisorption and chemisorption on the alloy surface. The surface morphology of the weld aged maraging steel specimens in the presence and the absence of the inhibitors was studied by the respective SEM images. © ACA and OCCA 2011.Item Influence of 2-(4-chlorophenyl)-2-oxoethyl benzoate on the hydrogen evolution and corrosion inhibition of 18 Ni 250 grade weld aged maraging steel in 1.0 M sulfuric acid medium(2012) Sanatkumar, B.S.; Nayak, J.; Nityananda Shetty, A.N.Electrochemical corrosion behavior and hydrogen evolution reaction of weld aged maraging steel have been investigated, in 1.0 M sulfuric acid solution containing different concentrations of 2-(4-chlorophenyl)-2-oxoethyl benzoate (CPOB). The data obtained from polarization technique showed that the corrosion current density (i corr) and the hydrogen evolution rate decrease, indicating a decrease in the corrosion rate of weld aged maraging steel as well as an increase in the inhibition efficiency (?%) with the increase in inhibitor concentration. Changes in impedance parameters were indicative of adsorption of CPOB on the metal surface, leading to the formation of protective film. Both activation (E a) and thermodynamic parameters (?G ads 0, ?H ads 0 and ?S ads 0) were calculated and discussed. The adsorption of CPOB on the weld aged maraging steel surface obeyed the Langmuir adsorption isotherm model. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) study confirmed the formation of an adsorbed protective film on the metal surface. © 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.Item CORROSION BEHAVIOR OF 18% Ni M250 GRADE MARAGING STEEL UNDER WELD-AGED CONDITION IN SULFURIC ACID MEDIUM(2012) Sanatkumar, B.S.; Nayak, J.; Nityananda Shetty, A.N.The corrosion behavior of 18% Ni M250 grade maraging steel under weld-aged condition was investigated in sulfuric acid medium of different concentrations (0.1-2 M) at different temperatures (30°-60°C). Electrochemical measurements were carried out using the potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). The results showed an increase in the corrosion rate with the increases in temperature as well with increase in the concentration of the corrosion medium. The results obtained from the Tafel extrapolation technique and electrochemical impedance spectroscopy were in good agreement. Activation parameters were evaluated using the Arrhenius equation and transition state equation. The surface morphology of the corroded specimen was compared with that of the un-corroded sample by using scanning electron microscopy (SEM). © 2012 Copyright Taylor and Francis Group, LLC.