Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Corrosion inhibition of aluminum type 6061 Al-15 vol. pct. SiC(p) composite in 0.5-M sodium hydroxide solution by 4-amino-5-phenyl-4H-1,2,4-triazole-3-thiol(Emerald Group Publishing Ltd. Howard House Wagon Lane, Bingley BD16 1WA, 2014) Reena Kumari, P.D.; Nayak, J.; Nityananda Shetty, A.Purpose: The purpose of this paper is to report the studies on the corrosion inhibition property of 4-amino-5-phenyl-4H-1,2,4-triazole-3-thiol (APTT) for the corrosion of 6061 Al-15 vol. pct. SiC(p) composite. Design/methodology/approach: The corrosion behavior of 6061 Al-15 vol. pct. SiC(p) composite was studied at different temperatures in 0.5-M sodium hydroxide (NaOH) solution in the presence of APTT by potentiodynamic polarization (PDP) and electrochemical impedance spectroscopic techniques. The effect of inhibitor concentration and temperature on the inhibitor effect of APTT was studied. The surface morphology of the metal surface was investigated by scanning electron microscopy. The activation parameters for the corrosion of the composite and base alloy, as well as the thermodynamic parameters for the adsorption of APTT on the composite and alloy surfaces, were calculated. Findings: The inhibition efficiency of APTT increases with the increase in the concentration of the inhibitor and decreases with the increase in temperature. The adsorption of APTT on the composite was found to be through physisorption, obeying Langmuir's adsorption isotherm. APTT acts as a mixed inhibitor with predominant cathodic action on the composite. Practical implications: APTT can be used as an inhibitor for the corrosion of 6061 Al-15 vol. pct. SiC(p) composite in the NaOH medium. Originality/value: This paper provides information regarding the corrosion inhibition property of APTT on 6061 Al-15 vol. pct. SiC(p) composite. An attempt was made to explain the mechanism of the inhibition action by APTT. © Emerald Group Publishing Limited.Item Corrosion behavior of 6061/Al-15 vol. pct. SiC(p) composite and the base alloy in sodium hydroxide solution(Elsevier B.V., 2016) Reena Kumari, P.D.; Nayak, J.; Nityananda Shetty, A.The corrosion behavior of 6061/Al-15 vol. pct. SiC(p) composite and 6061 Al base alloy was investigated in a sodium hydroxide solution. The electrochemical parameters were derived from potentiodynamic polarization and electrochemical impedance spectroscopic (EIS) techniques. The results showed that the corrosion resistance of the composite was lower than that of the base alloy in selected corrosion media. The corrosion rates of both the composite and the base alloy increased with the increase in the concentration of sodium hydroxide and also with the increase in temperature. The surface morphology of the metal surface was investigated using scanning electron microscope (SEM). Activation energy was evaluated using Arrhenius equation, and enthalpy of activation and entropy of activation values were calculated using transition state equation. © 2012Item Compositionally Modulated Multilayered Zn-Co Deposits for Better Corrosion Resistance(Springer, 2020) Bhat, R.S.; Venkatakrishna, K.; Nayak, J.; Hegde, A.C.Zn-Co compositionally modulated multilayer alloy (CMMA) deposits have been developed onto mild steel using single bath technique. Multilayer alloy coatings have been galvanostatically produced using square current pulses. The switched cathode current density and number of layers have been designed for improved corrosion resistance. Experimental data revealed that multilayer coating with 120 layers at 10/30 mA/cm2 demonstrated ~ 125 times higher resistance to corrosion than monolayer alloy coating of the same thickness. The improved corrosion resistance of multilayer coatings is due to small changes in the wt.% cobalt, leading to change in the phase structure of deposit in alternate layers. The defects and failures occurring in a single layer in the deposition process are covered by the alternatively deposited coating layers. Therefore, the direction of the corrosive agent is extended or blocked. Further, the better corrosion resistances afforded by Zn-Co CMMA coatings were explained through changes in electronic properties at the interface, supported by Mott-Schottky’s plot. However, the decrease of corrosion resistance at a high degree of layering is attributed to the less relaxation time for redistribution of solutes in the diffusion layer, during plating. Potentiodynamic polarization and electrochemical impedance data showed its good protection ability. The enhanced corrosion resistance of multilayered deposits is due to small change in cobalt content, leading to alter the phase structure of the alternate-layers of the deposits. The structural morphology and the topographical structure of the coating were analyzed by scanning electron microscopy and atomic force microscopy. Evaluation of the chemical composition of the alloy coatings was carried out by x-ray photoelectron spectroscopy. © 2020, ASM International.