Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item The inhibition efficiency of Glycyl Glycine (GG) on the corrosion behaviour of Al-SiC(p) composite in 0.01, 0.1 and 1.0 N HCl solution has been investigated in the temperature range 30°-50°C using polarization techniques. The results indicate that GG acts as an anodic inhibitor and is chemisorbed following Temkin's model. The inhibitor efficiency increases with increase in inhibitor concentration and also with increase in temperature for a given inhibitor concentration. © 2006 SAEST.(Glycyl glycine as corrosion inhibitor for aluminium silicon carbide composite in hydrochloric acid) Rao, S.A.; Padmalatha; Nayak, J.; Nityananda Shetty, A.N.2006Item 3-Methyl-4-amino-5-mercapto-1,2,4-triazole as corrosion inhibitor for 6061 Al alloy in 0.5 M sodium hydroxide solution(Springer New York LLC barbara.b.bertram@gsk.com, 2011) Kumari, P.D.R.; Nayak, J.; Nityananda Shetty, A.N.3-Methyl-4-amino-5-mercapto-1,2,4-triazole (MAMT) was synthesized, and its inhibition action on the corrosion of 6061 Al alloy in 0.5 M sodium hydroxide was investigated by means of potentiodynamic polarization and electrochemical impedance spectroscopy techniques. The effect of inhibitor concentration, temperature, and concentration of the corrosion medium on the inhibitor action was investigated. The surface morphology of the metal surface was investigated by scanning electron microscopy (SEM). The inhibition efficiency increased with the increase in the concentration of the inhibitor, but decreased with the increase in temperature. Both thermodynamic and kinetic parameters were calculated and discussed. The adsorption of MAMT on the base alloy was found to be through physisorption, obeying Langmuir's adsorption isotherm. The results obtained from both the techniques were in good agreement with each other. © 2011 ACA and OCCA.Item 3,4-Dimethoxybenzaldehydethiosemicarbazone as corrosion inhibitor for aged 18 Ni 250 grade maraging steel in 0.5 M sulfuric acid(2011) Poornima, T.; Nayak, J.; Nityananda Shetty, A.N.The corrosion inhibition of the aged 18 Ni 250 grade maraging steel in 0.5 M sulfuric acid by 3,4-dimethoxybenzaldehydethiosemicarbazone(DMBTSC) has been investigated by potentiodynamic polarization and electrochemical impedance spectroscopy(EIS) techniques. The inhibition efficiency increased with the increase in inhibitor concentration and decreased with the increase in temperature. Polarization curves indicated mixed type inhibition behavior affecting both cathodic and anodic corrosion currents. The thermodynamic parameters of corrosion and adsorption processes were evaluated. The adsorption of DMBTSC on the aged maraging steel surface was found to obey the Langmuir adsorption isotherm model, and the calculated Gibb's free energy values confirm the spontaneous adsorption. The results obtained by the two techniques were in good agreement. © 2010 Springer Science+Business Media B.V.Item The corrosion inhibition of maraging steel under weld aged condition by 1(2E)-1-(4-Aminophenyl)-3-(2-Thienyl)prop-2-en-1-one in 1.5 M hydrochloric acid medium(Springer New York LLC barbara.b.bertram@gsk.com, 2012) Sanatkumar, B.S.; Nayak, J.; Nityananda Shetty, A.N.The influence of 1(2E)-1-(4-Aminophenyl)- 3-(2-Thienyl)prop-2-en-1-one (ATPI) on the corrosion behavior of weld aged maraging steel in 1.5 M hydrochloric acid was studied by potentiodynamic polarization method and AC impedance (EIS) technique at different temperatures. The results showed that the inhibition efficiency of ATPI increased with the increase in the concentration of inhibitor and decreased with the increase in temperature. ATPI acts as a mixed type inhibitor without affecting the mechanism of the hydrogen evolution reaction or iron dissolution. The adsorption of ATPI on a weld aged maraging steel surface obeys the Langmuir adsorption isotherm equation. Both activation and thermodynamic parameters were calculated and discussed. ATPI inhibits the corrosion through both physisorption and chemisorption on the alloy surface. The surface morphology of the weld aged maraging steel specimens in the presence and the absence of the inhibitors was studied by the respective SEM images. © ACA and OCCA 2011.