Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
8 results
Search Results
Item Investigation of new carbazole based metal-free dyes as active photo-sensitizers/co-sensitizers for DSSCs(Elsevier Ltd, 2018) Naik, P.; Su, R.; Elmorsy, M.R.; El-Shafei, A.; Vasudeva Adhikari, A.V.Herein, we report the molecular design, synthesis and characterization of three new D-D-?-A configured metal-free chromophores D1-3 for their application in DSSCs as sensitizers as well as co-sensitizers. The new entities comprise carbazole as donor scaffold, 4-methoxyphenyl group as auxiliary donor and three different units, viz. cyanoacetic acid, 2, 4-thiazolidinedione and barbituric acid as acceptor/anchoring groups. Their photochemical, electrochemical and theoretical studies were carried out in order to assess their feasibility as active sensitizers. Further, D1-3 were exploited as co-sensitizers along with NCSU-10 dye. Their photoelectrochemical performances and charge transport properties in fabricated DSSCs were studied. The results revealed that D1 sensitizer displayed the highest PCE of 2.20% among the three dyes. D3 when co-sensitized with NCSU-10 displayed an improved PCE of 8.32% (JSC = 19.25 mA.cm?2, VOC = 0.680 V, FF = 63.7%) while NCSU-10 alone exhibited PCE of 8.25% (JSC = 20.41 mA.cm?2, VOC = 0.667 V, FF = 60.6%). © 2017 Elsevier LtdItem Highly efficient carbazole based co-sensitizers carrying electron deficient barbituric acid for NCSU-10 sensitized DSSCs(Elsevier Ltd, 2018) Naik, P.; Keremane, K.S.; Elmorsy, M.R.; Su, R.; El-Shafei, A.; Vasudeva Adhikari, A.V.Herein, we report a comparative study of four interesting metal-free carbazole based organic dyes with different structural configurations, carrying electron deficient barbituric acid (C1-4), as effective co-sensitizers in DSSCs sensitized with NCSU-10 dye. The new entities comprise different structural architectures, viz. D-A (C1), D-?-A (C2), D-D-?-A (C3) and D-A-?-A (C4) configurations with same accepting/anchoring moiety. They consist of carbazole as donor scaffold linked to barbituric acid as an acceptor/anchoring unit via different ?-spacers. This paper describes the study of all the four co-sensitizers with regard to their structural, photophysical, electrochemical, theoretical and photovoltaic investigations. Also, it includes their structure-performance correlation study in detail. The devices co-sensitized with C1-4 displayed the superior photovoltaic performance when compared to NCSU-10 alone. The results ameliorate the role of efficient co-sensitizers to yield DSSC with improved performance. © 2018 Elsevier LtdItem Improvement in performance of N3 sensitized DSSCs with structurally simple aniline based organic co-sensitizers(Elsevier Ltd, 2018) Naik, P.; Abdellah, I.M.; Abdel-Shakour, M.; Su, R.; Keremane, K.S.; El-Shafei, A.; Vasudeva Adhikari, A.V.In this work, we report comprehensive photovoltaic investigation of four structurally simple D-A configured organic dyes, A1-4 as active co-sensitizers in DSSCs sensitized with well-known Ru (II) based N3 dye. These effective co-sensitizers (A1-4) comprise N,N-dimethylaniline ring as donor scaffold linked with electron withdrawing functionalities, viz. barbituric acid (A1), N,N-dimethyl barbituric acid (A2), thiobarbituric acid (A3), and N,N-diethyl thiobarbituric acid (A4) as acceptor/anchoring units. In the present study, for the first time we have demonstrated the profound role of various simple organic molecules carrying different heterocyclic anchoring units on the photovoltaic parameters of the N3 sensitized devices. Also, the effect of concentration of sensitizer/co-sensitizers on the device performance characteristics has been investigated in depth. From the results, it is evident that, the device fabricated using co-sensitizer A2 carrying N,N-dimethyl barbituric acid along with sensitizer N3 in all concentrations outperformed when compared to N3 alone or other co-sensitizers. Interestingly, the best photovoltaic performance was obtained for the co-sensitized device fabricated using 0.3 mM co-sensitizer A2 along with 0.2 mM of N3 sensitizer. It displayed PCE of 7.02% with JSC of 15.27 mA·cm?2, VOC of 0.671 V and FF of 68.47%. Thus, the observed results have thrown new light upon the device optimization to yield DSSCs with improved performance by the selection of matchable co-sensitizers at appropriate concentrations. © 2018 Elsevier LtdItem New cyanopyridine based conjugated polymers carrying auxiliary electron donors: From molecular design to blue emissive PLEDs(Elsevier Ltd, 2020) Pilicode, N.; Naik, P.; K M, K.M.; Acharya, M.; Satyanarayan, M.N.; Vasudeva Adhikari, A.V.Three new D-A (Donor-Acceptor) configured conjugated polymers, i.e. PPy1-3, centered on strong electron accepting cyanopyridine scaffold carrying varied auxiliary donors, viz. phenylene (PPy1), biphenyl (PPy2), and fluorene (PPy3) were designed and synthesized as blue emitters for PLEDs. The new polymers were subjected to spectral, thermal, photophysical and electrochemical characterization. Also, computational studies (DFT) were performed on the repeating units of polymer using Turbomole 7.2 V software package at the B3LYP/TZVP hybrid levels. Further, their weight average molecular masses were found to be 38.8 kDa, 38.9 kDa and 57.7 kDa, respectively as determined by GPC technique. Furthermore, the new polymers PPy1-3, were shown to be stable thermally up to 308–374 °C. Evidently, they exhibited good photophysical behavior with their optical energy band gaps of 2.53–2.64 eV. Finally, the polymers PPy1-3 were employed as an active emissive layer in standard ITO/PEDOT:PSS/Polymer/Al configured PLEDs. Interestingly, at 12 V all the newly fabricated devices exhibit a stable blue characteristic electroluminescence with low threshold voltages of 3.40–5.20 V, confirming an efficient injection of electrons in the diodes. From the results, it is clear that, the polymers PPy1-3, can be considered as prospective blue light emitters for PLED application. © 2019 Elsevier LtdItem Nicotinonitrile centered luminescent polymeric materials: Structural, optical, electrochemical, and theoretical investigations(John Wiley and Sons Inc, 2020) Pilicode, N.; Naik, P.; Vasudeva Adhikari, A.V.Herein, we describe the design, synthesis, and structural characterization of three new push-pull type conjugative polymers, that is, VPPy1-3 comprising strong electron-withdrawing N-heterocyclic nicotinonitrile scaffold coupled with electron-donating phenylene units through vinylene bridges, as promising candidates for optoelectronic applications. They were successfully synthesized from their respective co-monomers by simple polycondensation synthetic routes, viz. Knoevenagel and Wittig reactions. All the polymers were subjected to photophysical, electrochemical, thermal, and theoretical studies in order to ascertain their suitability in polymer light-emitting diode applications as blue emitters. Evidently, they are readily soluble in most of the organic solvents, enabling them easy solution-processable. These new polymers display strong blue photoluminescence at the peak in the range of 431 to 462 nm with a wide optical bandgap in the order of 2.55 to 2.63 eV. The obtained electrochemical data were employed to evaluate their HOMO/LUMOs. The density functional theory calculations generated useful information on their FMO, molecular geometries, and electronic properties. Also, the influence of their structural modification on the above-said properties was discussed in detail to reveal the structure-property relationship. Conclusively, these results illustrate the great prospective of this class of polymeric materials for the application in solution-processable blue LEDs. © 2020 Society of Plastics EngineersItem New cyanopyridine-based ?-conjugative poly(azomethine)s: Synthesis, characterization and electroluminescence studies(John Wiley and Sons Ltd, 2021) Pilicode, N.; Naik, P.; K M, K.M.; Acharya, M.; Satyanarayan, M.N.; Vasudeva Adhikari, A.V.Four new Schiff-base type conjugative polymers (CPs), that is, Py1-4 carrying a strong electron-withdrawing cyanopyridine scaffold coupled with different electron-donating aromatic/heteroaromatic moieties were synthesized from their respective co-monomers by simple poly-condensation route. They were subjected to structural, thermal, photophysical, and electrochemical characterizations and theoretical investigations in order to identify their suitability in polymer light-emitting diode (PLED) application. All these polymers showed good film-forming ability and exhibited favorable photophysical behaviors with an optical bandgap in the order of 2.54-2.68 eV. Further, their electrochemical data were used to evaluate highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels. Finally, Py1-4 were successfully employed as blue-light emitter in the construction of new ITO/PEDOT:PSS/ Py1-4/Al configured light-emitting diodes (LED), and the fabricated devices demonstrated stable blue electroluminescence behavior endorsing an effective electrons injection in the PLEDs. © 2020 John Wiley & Sons LtdItem Synthesis, optical, electrochemical, and computational investigation of new cyanopyridine-centered organic dyads(Elsevier B.V., 2023) Naik, P.; Pilicode, N.; Keremane, K.S.; Acharya, M.; Vasudeva Adhikari, A.V.Herein we report the molecular design, synthesis, and inclusive investigation of four novel di-anchored symmetric dyes (CP1-4) centered on electron deficient cyanopyridine scaffold as possible photosensitizers for DSSC application. These new chromogens (CP1-4) comprise a powerful electron-withdrawing cyanopyridine moiety linked with additional electron attracting functionalities such as cyanoacetic acid (CP1), 3-(carboxymethyl) rhodanine (CP2), 2,4,6-pyrimidinetrione (CP3), and 2,6-dihydroxy-2-mercaptopyrimidine (CP4), as effective acceptor/anchoring units via biphenyl donor units. Their in-depth optical and electrochemical behaviour were investigated to assess their suitability as photosensitizers. Further, the molecular modeling calculations were undertaken to understand their ground state properties and energy level potentials. The comprehensive studies revealed that they own all the requisites to performance as a potential photosensitizer for DSSC application. © 2023 Elsevier B.V.Item Enhancing the Photoelectrochemical Performance of Ru(II)-Sensitized Dye-Sensitized Solar Cells Using Cyanopyridine-Based Cosensitizers(John Wiley and Sons Inc, 2025) Naik, P.; Abdellah, I.M.; Abdel-Shakour, M.; Keremane, K.S.; Vasudeva Adhikari, A.V.The cosensitization approach is one of the widely adopted strategies for systematically enhancing photovoltaic performance of dye-sensitized solar cells (DSSCs) by utilizing two or more dyes with distinct absorption spectra. This method achieves panchromatic absorption, improves intramolecular charge transfer performance, prevents dye aggregation, and increases dye loading capability. In this study, we investigated four previously reported push–pull-type dianchored chromophores (CP1–4) featuring a cyanopyridine scaffold as cosensitizer to enhance the performance of Ru(II)-based N3-sensitized DSSCs. Both the co-sensitized devices (N3 + CP1–4) and the N3-only devices were fabricated using a fixed dye concentration of 0.2 mM for each sensitizer/cosensitizers, while the coadsorbent chenodeoxycholic acid (CDCA) was systematically varied between 0 and 20 mM. This systematic variation of CDCA concentration was designed to examine its role in suppressing dye aggregation and modulating interfacial charge dynamics. Among the Series, CP4, carrying a thiobarbituric acid anchoring/acceptor group, demonstrated superior performance at all CDCA concentrations, achieving power conversion efficiency of 6.67%, 6.79%, and 5.74%, compared to 6.02%, 6.10%, and 5.44% for devices sensitized with N3 alone. Further, electrochemical impedance spectroscopy measurements confirmed the improved charge transport and reduced recombination in these devices. These findings highlight the potential of rationally engineered cosensitizers and optimized coadsorbent concentrations for enhancing the performance of metal-based sensitizers in DSSCs. © 2025 Wiley-VCH GmbH.