Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Search Results

Now showing 1 - 5 of 5
  • Item
    ZnO/carbon nanotube nanocomposite for high energy density supercapacitors
    (2013) Aravinda, L.S.; Nagaraja, K.K.; Nagaraja, H.S.; Bhat, K.; Badekai Ramachandra, B.
    A facile, green and highly efficient method for the decoration of carbon nanotubes with ZnO was developed for the fabrication of binder-free composite electrode for supercapacitor applications. The nano composite was prepared by using reactive magnetron sputtering in Ar/O2 environment. This approach leads to more uniform coating with tuneable thickness, which alters the electrochemical performance of the nano composite electrodes. The structure and surface morphology of the composite film have been studied by means of X-ray diffraction (XRD) analysis, scanning electron microscopy and field emission scanning electron microscopy (FESEM). The XRD study reveals the formation of Wurtzite ZnO structure. The electrochemical performance of nano composite electrode was investigated using cyclic voltammetry, chronopotentiometry and electrochemical impedance measurements in non-aqueous electrolyte. The nano composite electrode shows significant increase in the specific capacitance up to 48 F g-1 with an energy density 13.1 Wh kg-1 in the potential range -2 V to 1 V. © 2013 Elsevier Ltd. All rights reserved.
  • Item
    Microwave assisted growth of stannous ferrite microcubes as electrodes for potentiometric nonenzymatic H2O2 sensor and supercapacitor applications
    (Elsevier Ltd, 2016) Bindu, K.; Sridharan, K.; Ajith, K.M.; Lim, H.N.; Nagaraja, H.S.
    Electrochemical sensors and supercapacitors are two noteworthy applications of electrochemistry. Herein, we report the synthesis of SnFe2O4 microcubes and Fe2O3 nanorods through a facile microwave assisted technique which are employed in fabricating the electrodes for nonenzymatic hydrogen peroxide (H2O2) sensor and supercapacitor applications. SnFe2O4 microcubes exhibited an enhanced specific capacitance of 172 Fg?1 at a scan rate of 5 mVs?1 in comparison to Fe2O3 nanorods (70 Fg?1). Furthermore, the H2O2 sensing performance of the fabricated SnFe2O4 electrodes through chronopotentiometry studies in 0.1 M PBS solution (at pH 7) with a wide linear range revealed a good sensitivity of 2.7 mV ?M?1 ?g?1 with a lowest detection limit of 41 nM at a signal-to-noise ratio of 3. These results indicate that SnFe2O4 microcubes are excellent materials for the cost effective design and development of efficient supercapacitors as well as nonenzymatic sensors. © 2016 Elsevier Ltd
  • Item
    Microwave assisted synthesis of rGO/ZnO composites for non-enzymatic glucose sensing and supercapacitor applications
    (Elsevier Ltd, 2017) Moolayadukkam, M.; Dhanush, S.; Rossignol, F.; Nagaraja, H.S.
    Zinc oxide (ZnO) and Graphene Oxide (GO) are known to show good electrochemical properties. In this paper, rGO/ZnO nanocomposites have been synthesised using a simple microwave assisted method. The nanocomposites are characterized using XRD, Raman, SEM and TEM. XRD reveals the wurtzite structure of ZnO and TEM shows the heterogeneous nucleation of ZnO nanocrystals anchored onto graphene sheets. The electrochemical properties of the rGO/ZnO nanocomposite enhanced significantly for applications in glucose sensors and supercapacitors. The non-enzymatic glucose sensor of this nanocomposite tested using cyclic voltammetry (CV) and chronoamperometry, exhibits high sensitivity (39.78 mA cm?2 mM?1) and a lower detection limit of 0.2 nM. The supercapacitor electrode of rGO/ZnO nanocomposite exhibits a significant increase in specific capacitance. © 2017 Elsevier Ltd and Techna Group S.r.l.
  • Item
    Effect of oxygen substitution and phase on nickel selenide nanostructures for supercapacitor applications
    (Institute of Physics Publishing helen.craven@iop.org, 2018) Bhat, K.S.; Nagaraja, H.S.
    Electrochemical supercapacitors are the eminent technology for the progress of energy storage devices. The current manuscript deals with the formation of oxygen substituted nickel selenide nanostructures and their use as active electrode material for supercapacitor, expecting an enhanced performance owing to their sheet-like geometry, high specific surface area and porous assembly. In this context, Ni(OH)2 (nickel hydroxide) nanostructures were synthesized employing one-pot hydrothermal method and the ion-exchange reaction of Ni(OH)2 nanostructures with selenium resulted in cubic-NiSe2 (nickel selenide) nanostructures. Further, annealing NiSe2 nanostructures at intermediate pressure (10-3 Torr) has realized the partial oxygen substitution in place of selenium, resulting in NiSe/NiO nanostructures along with phase change from cubic-NiSe2 to hexagonal-NiSe. Supercapacitor electrodes fabricated using NiSe/NiO nanostructures delivered the specific capacitance of 83.5 F g-1 at the scan rate of 2 mV s-1, which is surprisingly more than a double as compared with pristine NiSe2 electrodes (37.4 F g-1). Annealing at intermediate pressure and high temperature significantly enhanced the specific capacitances of the nanostructured electrodes and also accompanied with the good capacitance retention of 94% for 5000 CV cycles. © 2018 IOP Publishing Ltd.
  • Item
    ZnWO4/SnO2 composite for supercapacitor applications
    (Elsevier B.V., 2020) Vinayaraj, S.; Brijesh, K.; Dhanush, P.C.; Nagaraja, H.S.
    The pristine ZnWO4 and ZnWO4/SnO2 composite was synthesized by solvothermal method. The crystal structure of the ZnWO4 and ZnWO4/SnO2 composite is determined by powder X-ray diffraction (XRD) pattern. The morphology of the samples investigated using SEM and found to be agglomerated structure. The samples are tested as an electrode material for supercapacitor using electrochemical techniques like cyclic Voltammetry (CV), Galvanostatic Charge-Discharge (GCD) and Electrochemical Impedance Spectroscopy (EIS). The ZnWO4/SnO2 composite reveals 56.7 F/g specific capacitance at 1 mV/s scan rate which is higher than that of pristine material and also ZnWO4/SnO2 composite exhibits good cyclic stability than pure ZnWO4. © 2020 Elsevier B.V.