Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
12 results
Search Results
Item ZnO/carbon nanotube nanocomposite for high energy density supercapacitors(2013) Aravinda, L.S.; Nagaraja, K.K.; Nagaraja, H.S.; Bhat, K.; Badekai Ramachandra, B.A facile, green and highly efficient method for the decoration of carbon nanotubes with ZnO was developed for the fabrication of binder-free composite electrode for supercapacitor applications. The nano composite was prepared by using reactive magnetron sputtering in Ar/O2 environment. This approach leads to more uniform coating with tuneable thickness, which alters the electrochemical performance of the nano composite electrodes. The structure and surface morphology of the composite film have been studied by means of X-ray diffraction (XRD) analysis, scanning electron microscopy and field emission scanning electron microscopy (FESEM). The XRD study reveals the formation of Wurtzite ZnO structure. The electrochemical performance of nano composite electrode was investigated using cyclic voltammetry, chronopotentiometry and electrochemical impedance measurements in non-aqueous electrolyte. The nano composite electrode shows significant increase in the specific capacitance up to 48 F g-1 with an energy density 13.1 Wh kg-1 in the potential range -2 V to 1 V. © 2013 Elsevier Ltd. All rights reserved.Item Solar exfoliated graphene and its application in supercapacitors and electrochemical H2O2 sensing(Elsevier Ltd, 2015) Moolayadukkam, M.; Huang, N.M.; Nagaraja, H.S.In the present study, graphene nanosheets are synthesized using sunlight irradiation focussed onto graphite oxide. The morphological characteristics of graphene are examined using Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). Raman spectroscopy and X-ray diffraction (XRD) are used for the structural characterization of the sample. The electrochemical performance is evaluated using cyclic voltammetry (CV), charge-discharge characteristics and impedance spectroscopy. A high specific capacitance value of 223 F g-1 is obtained using cyclic voltammetry. The electrochemical detection of H2O2, a common biological species using solar graphene is demonstrated. The impedance spectroscopy and CV are used to study the electrocatalytic activity of the material. High sensitivity of 64.79 ?A mM-1 cm-2 is reported. © 2015 Elsevier Ltd. All rights reserved.Item Fabrication and performance evaluation of hybrid supercapacitor electrodes based on carbon nanotubes and sputtered TiO2(Institute of Physics Publishing michael.roberts@iop.org, 2016) Aravinda, L.S.; Nagaraja, K.K.; Nagaraja, H.S.; Bhat, K.U.; Badekai Ramachandra, B.R.We report a simple and eco-friendly method for the fabrication of a titanium dioxide/functionalized multiwalled carbon nanotube (TiO2/FMWCNT) composite electrode for use in supercapacitors. The nanocomposite electrodes were formed by depositing titanium dioxide onto FMWCNTs using reactive magnetron sputtering, thus providing a green roue for the formation of the binder-free composite electrode. It is shown that the electrochemical performance of the fabricated electrodes can be altered by tuning the thickness of the titanium dioxide overlayer. The integrated nanocomposite electrode showed an improved specific capacitance of 90 Fg-1 in two-electrode configuration. © 2016 IOP Publishing Ltd.Item Microwave assisted growth of stannous ferrite microcubes as electrodes for potentiometric nonenzymatic H2O2 sensor and supercapacitor applications(Elsevier Ltd, 2016) Bindu, K.; Sridharan, K.; Ajith, K.M.; Lim, H.N.; Nagaraja, H.S.Electrochemical sensors and supercapacitors are two noteworthy applications of electrochemistry. Herein, we report the synthesis of SnFe2O4 microcubes and Fe2O3 nanorods through a facile microwave assisted technique which are employed in fabricating the electrodes for nonenzymatic hydrogen peroxide (H2O2) sensor and supercapacitor applications. SnFe2O4 microcubes exhibited an enhanced specific capacitance of 172 Fg?1 at a scan rate of 5 mVs?1 in comparison to Fe2O3 nanorods (70 Fg?1). Furthermore, the H2O2 sensing performance of the fabricated SnFe2O4 electrodes through chronopotentiometry studies in 0.1 M PBS solution (at pH 7) with a wide linear range revealed a good sensitivity of 2.7 mV ?M?1 ?g?1 with a lowest detection limit of 41 nM at a signal-to-noise ratio of 3. These results indicate that SnFe2O4 microcubes are excellent materials for the cost effective design and development of efficient supercapacitors as well as nonenzymatic sensors. © 2016 Elsevier LtdItem Hydrothermally synthesized reduced graphene oxide and Sn doped manganese dioxide nanocomposites for supercapacitors and dopamine sensors(Elsevier Ltd, 2017) Shanbhag, D.; Bindu, K.; Aarathy, A.R.; Ramesh, R.; Moolayadukkam, M.; Nagaraja, H.S.?-MnO2 nanowires and its nanocomposites (rGO-MnO2 and Sn@rGO-MnO2) were synthesized by a facile hydrothermal technique. Two important electrochemical applications of nanocomposites, viz, electrodes for supercapacitor and sensors for a biomolecule, dopamine are reported. The prepared nanowires have been characterized by XRD, which reveals smaller crystallite size of rGO- MnO2 composites compared to pristine MnO2 and the trend is supported by BET analysis. The wrapping of MnO2 NWs with rGO sheets increases the surface area, as well as, creates more dislocations at the interfaces. The correlation between physicochemical properties leads to an enhancement in the electrochemical performance of the materials. The as-fabricated Sn@rGO-MnO2 supercapacitor electrode reveals superior performance. The specific capacitance of 139.05, 309.7 and 460.9 F/g at a scanning rate of 20 mV/s, in an aqueous Na2SO4 solution (1 M) is obtained for MnO2, rGO-MnO2 and Sn@rGO-MnO2 respectively. Also, the reported nanocomposites show excellent performance towards detection of dopamine. Among ?-MnO2/GCE, rGO-MnO2/GCE and Sn@rGO-MnO2/GCE based sensors for Dopamine detection, rGO-MnO2/GCE sensor exhibits the highest sensitivity of 433.6 ?A/mM and broad linear range, whereas Sn@rGO-MnO2 exhibits lower detection limit of 0.13 ?M. © 2017 Elsevier LtdItem Porous cobalt chalcogenide nanostructures as high performance pseudo-capacitor electrodes(Elsevier Ltd, 2017) Bhat, K.S.; Shenoy, S.; Nagaraja, H.S.; Sridharan, K.Electrochemical supercapacitor is an essential technology that is pivotal for the development of reliable energy storage devices. Herein, we report the fabrication of supercapacitor electrodes using nanostructured porous cobalt chalcogenide (CoTe2 and CoSe2) electrodes, anticipating an enhanced performance owing to their higher contact area with electrolyte and large pore volume enabling shorter diffusion paths for ion exchange. In this regard, we synthesized CoTe2 and CoSe2 nanostructures via an anion-exchange-reaction between pre-synthesized Co(OH)2 hexagonal nanosheets and chalcogen (tellurium and selenium) ions under hydrothermal conditions. Structural, morphological and compositional properties of the as-synthesized materials are examined using X-ray diffraction, Raman spectroscopy, scanning electron microscopy, high resolution transmission electron microscopy and energy dispersive X-ray spectroscopy. Pseudo-capacitive properties of CoTe2 and CoSe2 nanostructures as working electrodes are studied through cyclic voltammetry and galvanostatic charge-discharge methods using an electrochemical workstation. CoSe2 electrode delivered a specific capacitance of 951 F g?1 at a scan rate of 5 mV s?1, which surprisingly is almost three times higher in comparison to CoTe2 electrode (360 F g?1). Both CoTe2 and CoSe2 electrodes exhibited good capacitance retention capability for 2500 CV cycles. The superior electrochemical performance of the nanoporous CoSe2 electrode indicate their applicability for high-performance energy storage device applications. © 2017 Elsevier LtdItem Dual electrochemical application of r-GO wrapped ZnWO4/Sb nanocomposite(Institute of Physics Publishing helen.craven@iop.org, 2019) Brijesh, K.; Bindu, K.; Amudha, A.; Nagaraja, H.S.ZnWO4/Sb nanorods and r-GO-ZnWO4/Sb nanocomposite have been prepared using a single step solvothermal method. The prepared nanocomposites have been characterized using x-ray diffractometer (XRD), Scanning Electron Microscope (SEM), High Resolution Transmission Electron Microscope (HR-TEM), Raman and Brunauer-Emmett-Teller (BET). The x-ray photoelectron spectroscopy (XPS) technique was used to determine the elemental composition of ZWS-5 (5 mg r-GO-ZnWO4/Sb) composite. The XRD reveals the monoclinic wolframite structure of ZnWO4/Sb and r-GO-ZnWO4/Sb. SEM and HRTEM confirms that the ZnWO4/Sb has been decorated on the r-GO sheets. The electrochemical performance of the prepared samples towards the Hydrogen Evolution Reaction (HER) and dopamine sensing has been tested using electrochemical techniques. Onset potential of 265 mV @10 mA cm-2, lower Tafel slope (95 mV dec-1), high electrochemical surface area (1383.216 m2g-1) and high specific site density (18.551 06 × 1021 g-1) of ZWS-5 reveals the high electrocatalytic activity of the composite towards HER. Chronoamperometric dopamine sensing shows that ZWS-5 has the superior sensing performance with highest specific sensitivity (723 ?A ?M-1 ?g-1), lowest limit of detection (0.9624 ?M), along with a good selectivity. Results suggest that the r-GO-ZnWO4/Sb nanocomposite is a good candidate for the HER and electrochemical dopamine sensor. The incorporation of r-GO nanosheets with ZnWO4/Sb (ZWS) nanorods enhances the specific and electrochemical surface area, which accounts for the high electrocatalytic activity of the composite. © 2019 IOP Publishing Ltd.Item Morphology-dependent electrochemical performances of nickel hydroxide nanostructures(Indian Academy of Sciences, 2019) Bhat, K.S.; Nagaraja, H.S.Electrochemical capacitors form part of the developing technologies in the field of alternative energy sources. In the present work, nickel hydroxide (Ni(OH) 2) nanosheets and microflowers are hydrothermally prepared employing different chemical precursors. Structure, morphology and chemical analysis are conducted using powder X-ray diffraction, field emission scanning electron microscopy and energy-dispersive X-ray spectroscopy measurements. Electrochemical performances as supercapacitor electrodes of the synthesized nanostructures are evaluated through cyclic voltammetry and galvanostatic charge–discharge measurements with three-electrode configurations. The results indicated the specific capacitance of 180 and 417Fg-1 at a scan rate of 5mVs-1 for Ni(OH) 2 nanosheets and microflowers, respectively. The higher specific capacitances for Ni(OH) 2 microflowers could be attributed to the higher specific surface area, morphology, electronic conductivity and porosity. Both Ni(OH) 2 nanostructures exhibited good capacitance retention for 1500 cycles. © 2019, Indian Academy of Sciences.Item Monoclinic Wolframite ZnWO4/SiO2 nanocomposite as an anode material for lithium ion battery(Elsevier B.V., 2020) Brijesh, K.; Dhanush, P.C.; Vinayraj, S.; Nagaraja, H.S.Herein, we report the preparation and characterization of the ZnWO4 and ZnWO4/SiO2 nanocomposite. The ZnWO4/SiO2 nanocomposite exhibits 570 mAh g?1 discharge capacity and 314 mAh g?1 charge capacity at 10 mA g?1 for the primary cycle. The increasing amount of SiO2 in the ZnWO4/SiO2 nanocomposite increases the overall performance of the composite. The synergetic effect between the ZnWO4 and SiO2 enhances the rate capability, specific capacity, cycle stability and coloumbic efficiency of the composite. The good electrochemical performance of ZnWO4/SiO2 nanocomposite makes it a promising anode for Lithium ion battery. © 2020 Elsevier B.V.Item GeO2/ZnWO4@CNT nanocomposite as a novel anode material for lithium-ion battery(Springer, 2020) Brijesh, K.; Nagaraja, H.S.Single-walled carbon nanotube (SWCNT) wrapped GeO2/ZnWO4 nanocomposite was prepared by single-step solvothermal method. In this work, GeO2/ZnWO4 nanocomposites were prepared by varying the molar percentage of GeO2 and by further adding SWCNT for the composite to boost the electrochemical performance. The prepared GeO2/ZnWO4 nanocomposites and GeO2/ZnWO4@CNT nanocomposite are used as anode material for lithium-ion battery (LIB). As expected, GeO2/ZnWO4@CNT nanocomposite exhibits higher capacities and good rate capability than the GeO2/ZnWO4 nanocomposite. The GeO2/ZnWO4@CNT nanocomposite exhibits 930 mAh g?1 discharge capacity and 533 mAh g?1 charge capacity for the initial cycle at 100 mAh g?1 in the voltage range of 0.01–3 V (vs. Li+/Li). Even at high current density of 500 mAh g?1, GeO2/ZnWO4@CNT nanocomposite shows 231 mAh g?1 and 257 mAh g?1 charge/discharge capacity which are higher than that of GeO2/ZnWO4 nanocomposite. The GeO2/ZnWO4@CNT nanocomposite delivers 75.8% capacity retention and 100% coulombic efficiency even after 400 cycles at 300 mAh g?1. These results direct that GeO2/ZnWO4@CNT nanocomposite is a good negative electrode for lithium-ion battery. [Figure not available: see fulltext.]. © 2020, Springer-Verlag GmbH Germany, part of Springer Nature.