Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Dual storage mechanism of Bi2O3/Co3O4/MWCNT composite as an anode for lithium-ion battery and lithium-ion capacitor(Elsevier B.V., 2024) Lakshmi Sagar, G.; Brijesh, K.; Mukesh, P.; Hegde, A.P.; Kumar, A.; Kumar, A.; Bhat, K.S.; Nagaraja, H.S.Bismuth oxide(Bi2O3) and cobalt oxide(Co3O4) are promising owing to their unique properties, high storage capacity, low cost, and eco-friendliness, making them ideal for lithium-ion batteries(LIBs) and lithium-ion capacitors(LICs) anodes. This study presents the synthesis and thorough characterization of Bi2O3/Co3O4 and Bi2O3/Co3O4/MWCNT composites as potential LIB and LIC anode materials. The materials are synthesized using a hydrothermal process succeeded by annealing. Structural, morphological, and compositional studies were analyzed. Various tests evaluated electrochemical performance, including cyclic voltammetry(CV), confirming a dual storage mechanism like alloying and conversion reaction involved for better energy storage. Specific discharge capacities of 834 mAh/g and 1184 mAh/g were recorded for Bi2O3/Co3O4 and Bi2O3/Co3O4/MWCNT composite electrodes at a current density of 100 mA/g, respectively. The composite material exhibited notably enhanced rate capability, with 31 % and 51 % discharge capacities for Bi2O3/Co3O4 and Bi2O3/Co3O4/MWCNT, respectively. The cyclic stability assessment revealed that Bi2O3/Co3O4 and Bi2O3/Co3O4/MWCNT maintained a high coulombic efficiency of around 99 % over 250 charge–discharge cycles at a high current density of 1 A/g. The capacity retention was approximately 253 mAh/g for Bi2O3/Co3O4 and 439 mAh/g for the Bi2O3/Co3O4/MWCNT composite, indicating excellent cyclic stability and minimal energy loss during cycling. Moreover, the LICs assembly of Bi2O3/Co3O4/MWCNT//CB was investigated, revealing a power density of 200 W kg?1 alongside an energy density of 8.64 Wh kg?1. The cyclic stability assessment over 10,000 cycles exhibits a capacity retention of approximately 45 % under a high current density of 2 A/g. © 2024 Elsevier B.V.Item A study on the influence of geometric coordination of cobalt ions on the structural, physical and optical properties of borosilicate glass(Elsevier Ltd, 2025) Raghuvanshi, V.; Rashmi, R.; Ingle, A.; Shashikala, H.D.; Nagaraja, H.S.This work explores the synthesis and characterization of cobalt oxide-added borosilicate glass using the melt-quenching technique. The glass system was investigated using various methods, including X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), density measurements, UV–vis spectroscopy, photoluminescence, and electron paramagnetic resonance (EPR) spectroscopy. XRD validated the glass's amorphous nature, while FTIR results indicated significant bonding alterations, showing a transition from BO3 to BO4 units and from B3-O-Si to B4-O-Si linkages. The increased glass density further supported the formation of BO4 units. XPS analysis verified the presence of Co2+ and Co3+ ions within the glass matrix. Optical absorption studies revealed distinct electronic transitions for Co2+ ions in both tetrahedral and octahedral coordination, and for Co3+ ions in octahedral coordination, which was corroborated by EPR spectroscopy. The paramagnetic nature of Co2+ ions was analyzed, and the g-value was determined using X-band frequency. The study also noted the narrowing of the indirect band gap with the rise in the content of Co3O4, and the examination of the metallization criterion suggested a potential metallic nature for the synthesized glasses. Notably, the 0.05 mol% Co3O4-added sample exhibited a 48 % transmission rate and the highest emission, highlighting its potential as an optical bandpass filter. These findings underscore the versatility and tunability of cobalt oxide-added borosilicate glass for various optical technologies. © 2024 Elsevier Ltd and Techna Group S.r.l.