Faculty Publications

Now showing 1 - 4 of 4

Numerical study of forced convection heat transfer in an oscillating lid driven cavity with heated top wall
(International Information and Engineering Technology Association info@iieta.org, 2018) Indukuri, J.V.; Maniyeri, R.
The present work is aimed to study the fluid flow and heat transfer behaviour in an oscillating lid-driven cavity using finite volume method by developing a two-dimensional computational model. Firstly, the developed computational model is validated by comparing our numerical results with that of the other researcher's results for the case of wall moving with finite motion. Next, the simulations are conducted for oscillating cavity problem with top wall oscillation for Reynolds number (Re =5 00) and frequency (?=2?/6). Later, the simulations are carried out for cases of oscillating parallel wall (upper and lower walls oscillating with sync) and oscillating anti-parallel wall (upper and lower walls oscillating with reverse sync) with the same optimum frequency and fixed Reynolds number (Re = 500). Secondly, the same optimum frequency is used to study the heat transfer characteristics in an oscillating lid-driven square cavity with heated top wall and lower cold wall for various Reynolds numbers (Re = 100-1000) and Prandtl numbers (Pr = 0.2 to 1.0). From this study, it is found that for high Prandtl number case (Pr = 1.0) the flow of high temperature isotherms inside the cavity is more when compared with low Prandtl number cases due to increase in molecular diffusion of momentum. © 2018 International Information and Engineering Technology Association.
Numerical simulation of buckling and asymmetric behavior of flexible filament using temporal second-order immersed boundary method
(Emerald Publishing, 2020) Kanchan, M.; Maniyeri, R.
Purpose: The purpose of this paper is to perform two-dimensional numerical simulation involving fluid-structure interaction of flexible filament. The filament is tethered to the bottom of a rectangular channel with oscillating fluid flow inlet conditions at low Reynolds number. The simulations are performed using a temporal second-order finite volume-based immersed boundary method (IBM). Further, to understand the relation between different aspect ratios i.e. ratio of filament length to channel height (Len/H) and fixed channel geometry ratio, i.e. ratio of channel height to channel length (H/Lc) on mixing and pumping capabilities. Design/methodology/approach: The discretization of governing continuity and Navier–Stokes equation is done by finite-volume method on a staggered Cartesian grid. SIMPLE algorithm is used to solve fluid velocity and pressure terms. Two cases of oscillatory flow conditions are used with the flexible filament tethered at the center of bottom channel wall. The first case is sinusoidal oscillatory flow with phase shift (SOFPS) and second case is sinusoidal oscillatory flow without phase shift (SOF). The simulation results are validated with filament dynamics studies of previous researchers. Further, parametric analysis is carried to study the effect of filament length (aspect ratio), filament bending rigidity and Reynolds number on the complex deformation and behavior of flexible filament interacting with nearby oscillating fluid motion. Findings: It is found that selection of right filament length and bending rigidity is crucial for fluid mixing scenarios. The phase shift in fluid motion is also found to critically effect filament displacement dynamics, especially for rigid filaments. Aspect ratio, suitable for mixing applications is dependent on channel geometry ratio. Symmetric deformation is observed for filaments subjected to SOFPS condition irrespective of bending rigidity, whereas medium and low rigidity filaments placed in SOF condition show severe asymmetric behavior. Two key findings of this study are: symmetric filament conformity without appreciable bending produces sweeping motion in fluid flow, which is highly suited for mixing application; and asymmetric behavior shown by the filament depicts antiplectic metachronism commonly found in beating cilia. As a result, it is possible to pin point the type of fluid motion governing fluid mixing and fluid pumping. The developed computational model can, thus, successfully demonstrate filament-fluid interaction for a wide variety of similar problems. Originality/value: The present study uses a temporal second-order finite volume-based IBM to examine flexible filament dynamics for various applications such as fluid mixing. Also, it highlights the relationship between channel geometry ratio and filament aspect ratio and its effect on filament sweep patterns. The study further reports the effect of filament displacement dynamics with or without phase shift for inlet oscillating fluid flow condition. © 2019, Emerald Publishing Limited.
Modeling rigid filament interaction under oscillatory flow using immersed boundary method
(Elsevier Ltd, 2022) Eldoe, J.B.; Kanchan, M.; Maniyeri, R.
The thread-like biological filament structures can enhance many processes such as fluid transport, locomotion, defence against foreign bodies etc. Researchers have tried to mimic these filament movements to improve fluid transport, mixing, drug delivery for microfluidic applications. These biological filaments can be modelled as slender rigid filaments which can be either active or passive. Active filaments move on their own thus causing a disruption in the fluid domain in close vicinity while passive filaments undergo motion depending upon the fluid flow past them. The dynamics of both active and passive filaments in low Reynolds number flow has immense research potential. In the case of passive filament, the nature of the incoming flow field is an important factor that affects the flow physics around the filament. This paper studies the flow dynamics of vertical and inclined passive rigid filaments in an oscillatory flow. The effect of change in flow conditions is studied by varying the Reynolds and Strouhal numbers. The simulation involves fluid-structure interaction which is implemented with the help of continuous forcing based immersed boundary (IB) method using finite volume discretization. This is a preliminary work towards modelling active filaments under different fluid flow conditions in channel in the near future. © 2022
SIMULATION OF RBC DYNAMICS IN OSCILLATORY FLOW USING SMOOTHED PARTICLE HYDRODYNAMICS
(World Scientific, 2025) Antony, J.; Maniyeri, R.
The study of red blood cell dynamics is an important research field. Understanding physiologic and pathologic characteristics of red blood cell can provide a new perspective to diagnosis and treatment of several diseases. In this work, a numerical model has been developed using the smoothed particle hydrodynamics which is a Lagrangian, meshless particle method to investigate red blood cell dynamics in oscillatory flow. The developed model is parallelized in graphic processing units using Compute Unified Device Architecture developed by NVIDIA that resulted in a seventeen fold reduction in computational cost. The effect of frequency of oscillation and phase difference on red blood cell dynamics is investigated. In addition, the dynamics of healthy and infected red blood cell in oscillatory flow is compared in this work to understand relevance of oscillatory flow in cell separation devices. © World Scientific Publishing Company.

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results