Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Numerical simulation of flow in a wavy wall microchannel using immersed boundary method(Bentham Science Publishers, 2020) Kanchan, M.; Maniyeri, R.Background: Fluid flow in microchannels is restricted to low Reynolds number regimes and hence inducing chaotic mixing in such devices is a major challenge. Over the years, the Immersed Boundary Method (IBM) has proved its ability in handling complex fluid-structure interaction prob-lems. Objectives: Inspired by recent patents in microchannel mixing devices, we study passive mixing effects by performing two-dimensional numerical simulations of wavy wall in channel flow using IBM. Methods: The continuity and Navier-Stokes equations governing the flow are solved by fractional step based finite volume method on a staggered Cartesian grid system. Fluid variables are described by Eulerian coordinates and solid boundary by Lagrangian coordinates. A four-point Dirac delta function is used to couple both the coordinate variables. A momentum forcing term is added to the governing equation in order to impose the no-slip boundary condition between the wavy wall and fluid interface. Results: Parametric study is carried out to analyze the fluid flow characteristics by varying amplitude and wavelength of wavy wall configurations for different Reynolds number. Conclusion: Configurations of wavy wall microchannels having a higher amplitude and lower wavelengths show optimum results for mixing applications. © 2020 Bentham Science Publishers.Item Numerical simulation of buckling and asymmetric behavior of flexible filament using temporal second-order immersed boundary method(Emerald Publishing, 2020) Kanchan, M.; Maniyeri, R.Purpose: The purpose of this paper is to perform two-dimensional numerical simulation involving fluid-structure interaction of flexible filament. The filament is tethered to the bottom of a rectangular channel with oscillating fluid flow inlet conditions at low Reynolds number. The simulations are performed using a temporal second-order finite volume-based immersed boundary method (IBM). Further, to understand the relation between different aspect ratios i.e. ratio of filament length to channel height (Len/H) and fixed channel geometry ratio, i.e. ratio of channel height to channel length (H/Lc) on mixing and pumping capabilities. Design/methodology/approach: The discretization of governing continuity and Navier–Stokes equation is done by finite-volume method on a staggered Cartesian grid. SIMPLE algorithm is used to solve fluid velocity and pressure terms. Two cases of oscillatory flow conditions are used with the flexible filament tethered at the center of bottom channel wall. The first case is sinusoidal oscillatory flow with phase shift (SOFPS) and second case is sinusoidal oscillatory flow without phase shift (SOF). The simulation results are validated with filament dynamics studies of previous researchers. Further, parametric analysis is carried to study the effect of filament length (aspect ratio), filament bending rigidity and Reynolds number on the complex deformation and behavior of flexible filament interacting with nearby oscillating fluid motion. Findings: It is found that selection of right filament length and bending rigidity is crucial for fluid mixing scenarios. The phase shift in fluid motion is also found to critically effect filament displacement dynamics, especially for rigid filaments. Aspect ratio, suitable for mixing applications is dependent on channel geometry ratio. Symmetric deformation is observed for filaments subjected to SOFPS condition irrespective of bending rigidity, whereas medium and low rigidity filaments placed in SOF condition show severe asymmetric behavior. Two key findings of this study are: symmetric filament conformity without appreciable bending produces sweeping motion in fluid flow, which is highly suited for mixing application; and asymmetric behavior shown by the filament depicts antiplectic metachronism commonly found in beating cilia. As a result, it is possible to pin point the type of fluid motion governing fluid mixing and fluid pumping. The developed computational model can, thus, successfully demonstrate filament-fluid interaction for a wide variety of similar problems. Originality/value: The present study uses a temporal second-order finite volume-based IBM to examine flexible filament dynamics for various applications such as fluid mixing. Also, it highlights the relationship between channel geometry ratio and filament aspect ratio and its effect on filament sweep patterns. The study further reports the effect of filament displacement dynamics with or without phase shift for inlet oscillating fluid flow condition. © 2019, Emerald Publishing Limited.Item Lateral migration of cylindrical particle in a constricted microchannel—A numerical study(John Wiley and Sons Inc, 2023) Neeraj, M.P.; Maniyeri, R.Inertial migration of a single cylindrical particle in a constricted microchannel is addressed in this work. A computational model (two-dimensional) has been constructed with the assistance of the immersed boundary finite volume method. The feedback forcing strategy is utilized for the simulation of lateral migration. The parameters like equilibrium position, migration time, and shortest equilibrium distance are computed to analyze the inertial migration characteristics of the particle. Also, a comprehensive parametric study has been performed on the migration behaviour of particles inside the constricted channel by addressing the effects of Reynolds number, diameter, initial release position, and constriction clearance. The parametric study shows that the equilibrium position changes with variations in the initial release position and particle diameter. On the other hand, it stays unaffected by changes in Reynolds number and constriction clearance. The parameters like the shortest equilibrium distance and migration time increase with a rise in Reynolds number and particle diameter. On the other hand, it reduces with the reduction in constriction clearance. Inspired by the parametric study results, in the following stage, a prediction model is created with an artificial neural network algorithm. This is used for an effective forecast of equilibrium position, migration time, and shortest equilibrium distance. Further, the computational model is utilized to check for the existence of a critical Reynolds number for the particle movement in a constricted microchannel. It is observed that the critical Reynolds number remains unchanged with a change in particle diameter. However, it increases linearly with an increase in constriction clearance. © 2022 Canadian Society for Chemical Engineering.