Faculty Publications

Now showing 1 - 4 of 4

Numerical simulation of oscillating lid driven square cavity
(Elsevier B.V., 2018) Indukuri, J.V.; Maniyeri, R.
This paper aim to develop a two-dimensional computational model to study the fluid dynamic behaviour in a square cavity driven by an oscillating lid using staggered grid based finite volume method. Firstly the developed computational model is validated with that of other researcher's results for the case of finite wall motion. Later the numerical simulations are performed for the case of top wall oscillations for various combinations of Reynolds number and frequencies. From these simulations an optimum frequency is chosen and then with the optimum frequency the simulations are carried out to explore the vortex behaviour for the cases of parallel wall oscillations (both top and bottom walls moving in the same direction) and anti-parallel wall oscillations (both top and bottom walls moving in the opposite direction). From these simulations it may be concluded that Re = 1000 is medium range of operation for better mixing inside the cavity for the cases of parallel and anti-parallel wall oscillations. © 2017 Faculty of Engineering, Alexandria University
Numerical study of forced convection heat transfer in an oscillating lid driven cavity with heated top wall
(International Information and Engineering Technology Association info@iieta.org, 2018) Indukuri, J.V.; Maniyeri, R.
The present work is aimed to study the fluid flow and heat transfer behaviour in an oscillating lid-driven cavity using finite volume method by developing a two-dimensional computational model. Firstly, the developed computational model is validated by comparing our numerical results with that of the other researcher's results for the case of wall moving with finite motion. Next, the simulations are conducted for oscillating cavity problem with top wall oscillation for Reynolds number (Re =5 00) and frequency (?=2?/6). Later, the simulations are carried out for cases of oscillating parallel wall (upper and lower walls oscillating with sync) and oscillating anti-parallel wall (upper and lower walls oscillating with reverse sync) with the same optimum frequency and fixed Reynolds number (Re = 500). Secondly, the same optimum frequency is used to study the heat transfer characteristics in an oscillating lid-driven square cavity with heated top wall and lower cold wall for various Reynolds numbers (Re = 100-1000) and Prandtl numbers (Pr = 0.2 to 1.0). From this study, it is found that for high Prandtl number case (Pr = 1.0) the flow of high temperature isotherms inside the cavity is more when compared with low Prandtl number cases due to increase in molecular diffusion of momentum. © 2018 International Information and Engineering Technology Association.
Finite difference method based analysis of bio-heat transfer in human breast cyst
(Elsevier Ltd, 2019) Patil, H.M.; Maniyeri, R.
Bio-heat transfer is a branch of bio-medical engineering which has its foundation linked to engineering disciplines of heat transfer. The thermal properties and behaviour of various malfunctioning tissues in human body varies as compared with normal tissues. Among various cancer tissues one which is commonly diagnosed in women is breast cyst (cancer causing fluid). The aim of present work is to develop one, two and three-dimensional computational models to study bio-heat transfer problems using finite difference method. First of all, a numerical model based on finite difference method is developed to solve Pennes's bio-heat transfer equation in one-dimension to get temperature profiles normal to skin surface and validated with existing analytical solutions. Secondly, the numerical model is extended to study the thermal behaviour of human breast section embedded with cyst using two-dimensional cylindrical coordinate systems and validated with previous researcher's results. The effect of size, location and presence of multiple cysts on surface temperature is studied. Lastly, the work is extended for the case of three-dimensional breast section with cyst located at the centre. The numerical results obtained using one, two and three-dimensional computational models will be highly helpful in the early detection of breast cancer tissues and also the location of it inside the body. © 2019
Lateral migration of cylindrical particle in a constricted microchannel—A numerical study
(John Wiley and Sons Inc, 2023) Neeraj, M.P.; Maniyeri, R.
Inertial migration of a single cylindrical particle in a constricted microchannel is addressed in this work. A computational model (two-dimensional) has been constructed with the assistance of the immersed boundary finite volume method. The feedback forcing strategy is utilized for the simulation of lateral migration. The parameters like equilibrium position, migration time, and shortest equilibrium distance are computed to analyze the inertial migration characteristics of the particle. Also, a comprehensive parametric study has been performed on the migration behaviour of particles inside the constricted channel by addressing the effects of Reynolds number, diameter, initial release position, and constriction clearance. The parametric study shows that the equilibrium position changes with variations in the initial release position and particle diameter. On the other hand, it stays unaffected by changes in Reynolds number and constriction clearance. The parameters like the shortest equilibrium distance and migration time increase with a rise in Reynolds number and particle diameter. On the other hand, it reduces with the reduction in constriction clearance. Inspired by the parametric study results, in the following stage, a prediction model is created with an artificial neural network algorithm. This is used for an effective forecast of equilibrium position, migration time, and shortest equilibrium distance. Further, the computational model is utilized to check for the existence of a critical Reynolds number for the particle movement in a constricted microchannel. It is observed that the critical Reynolds number remains unchanged with a change in particle diameter. However, it increases linearly with an increase in constriction clearance. © 2022 Canadian Society for Chemical Engineering.

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results