Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Utilisation of mine waste in the construction industry - A Critical Review(CAFET INNOVA Technical Society 1-2-18/103, Mohini Mansion, Gagan Mahal Road, Domalguda, Hyderabad 500029, 2016) Shreekant, R.L.; Mangalpady, M.; Vardhan, H.The exploitation of mineral resources would promote the development of economy and society, but it will also generate massive waste/tailings that may pollute the environment significantly (in the form of spreading of waste in and around the mines, siltation of soil/slimes in nearby water bodies, air pollution etc.) Therefore, developing comprehensive utilization of waste fines/tailings in large scale is the need of the day in order to improve the surroundings and for sustainable development of resources. Manufacturing of non-fired bricks is one of the options for utilization of waste generated in mines along with reduction of CO2 emission. If the waste material is improperly dumped in mine site, the flow of material during rainy season may reduce the fertility of nearby agricultural land. Hence, waste utilization plays a vital role in natural resource conservation. Further, building blocks/bricks from mine waste is eco-friendly as it utilizes waste and reduces air, land and water pollution. It is energy efficient and also cost effective as reported by various investigators in the past. Hence, it is very much necessary to find alternative for making use of iron ore waste material (fines)/tailings as an aggregate in construction materials like bricks or paving blocks. This paper provides a critical review of the utilization of mine waste for brick making in the construction industry. © 2016 CAFET-INNOVA TECHNICAL SOCIETY. All rights reserved.Item Investigating the Utility of Iron Ore Waste in Preparing Non-fired Bricks(Springer India sanjiv.goswami@springer.co.in, 2017) Lamani, S.R.; Mangalpady, M.; Vardhan, H.Iron ore waste is a major problem for mine owners due to the difficulty involved in its storage, handling and other environmental related issues. An alternative solution to this is utilisation of iron ore waste (IOW) as some value added product in construction industry. An attempt has been made in this paper in examining the possibility of making non-fired bricks from iron ore waste with some additives like cement and fly-ash. Each of the additives were mixed with IOW in different ratios and different sets of bricks were prepared. The prepared IOW bricks were cured for 7, 14, 21 and 28 days and their respective compressive strength and percentage of water absorption were determined. The results show that IOW bricks prepared with 9% and above cement and with 28 days of curing are suitable for brick making and meet the IS specifications. It was also observed that the weight of the prepared bricks with 9% cement with 28 days of curing varies between 2.35 and 2.45 kg whereas the weight of compressed fire clay bricks varies from 2.80 to 2.89 kg. Results also show that the cost of bricks prepared with cement ranging from 9 to 20% is comparable to that of commercially available compressed bricks. © 2016, The Institution of Engineers (India).