Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
13 results
Search Results
Item Fabrication of solution combustion based transparent semiconducting titanium and zinc co-doped indium oxide (Itizo) films(Trans Tech Publications Ltd ttp@transtec.ch, 2019) Vardhan, R.V.; Manjunath, G.; Mandal, S.In this work, solution combustion processed titanium, zinc co-doped indium oxide high transparent semiconducting thin films were demonstrated at annealing temperatures of 300, 350 °C. In the process, low-temperature combustion at 123 °C was verified through thermogravimetric analysis; acetylacetone, 2-methoxyethanol served as fuel and solvent respectively in the redox reaction. Indium titanium zinc oxide (ITiZO) films were developed on glass substrates by spin coating followed by annealing at different temperatures. ITiZO films, powder exhibited high crystallinity exactly matching with indium oxide peaks without forming secondary phases. But, the presence of In, Ti, Zn, and O is clearly visible on film through energy dispersive spectroscopy. Films had transparency more than 85% in the visible range with optical band gap ranging 3.8-3.9 eV. These ITiZO films with smooth and low roughness ranging 0.46-0.5 nm, can have a potential application as an active layer in transparent thin film transistors and optoelectronic devices. © 2019 Trans Tech Publications Ltd, Switzerland.Item Development of low temperature stoichiometric solution combustion derived transparent conductive ternary zinc tin co-doped indium oxide electrodes(Royal Society of Chemistry, 2017) Pujar, P.; Gandla, S.; Singh, M.; Gupta, B.; Tarafder, K.; Gupta, D.; Noh, Y.-Y.; Mandal, S.Here, the development of transparent conductive zinc tin co-doped indium oxide (IZTO: In1.4Sn0.3Zn0.3O3) ternary electrodes is addressed through low temperature solution combustion processing. Optimization of fuel to oxidizer ratio offers low temperature (?130 °C) of combustion with balanced redox reaction. The thin films of IZTO annealed at different temperatures showed a decreasing trend in the resistivity with a fixed order of 10-2 ? cm and the film with a highest Hall mobility of 5.92 cm2 V-1 s-1 resulted at 400 °C. All the films with different temperatures of annealing were smooth (rms ? 2.42 nm) in nature and the IZTO film annealed at 200 °C is 83% transparent in the visible spectra. The effective band gap of 0.9 eV determined from first-principles density functional theory gives clear evidence for the conducting nature of IZTO. The thin film transistor fabricated with IZTO as a gate electrode with poly(methyl methacrylate) and pentacene as the dielectric and channel material, respectively, exhibited a saturation mobility of 0.44 cm2 V-1 s-1 and Ion/Ioff ratio of 103. Further, the printability of the IZTO combustible precursor is established which resulted in anti-edge deposition of the printed feature. © 2017 The Royal Society of Chemistry.Item Retention of high dielectric constant sodium beta alumina via solution combustion: Role of aluminum ions complexation with fuel(Elsevier Ltd, 2018) Gupta, B.; Pujar, P.; Mal, S.S.; Gupta, D.; Mandal, S.In the present study, solution combustion technique has been explored to synthesize Sodium ?-alumina (SBA; NaAl11O17) powder and thin films. Three fuels namely urea, glycine and citric acid have been used to seek the feasibility of synthesizing crystalline SBA powder at low temperature. Also, the effect of nature of fuels used as well as calcination treatment on phase evolution and morphology of the as-combusted powder was investigated. Thermal analysis and X-ray diffraction studies suggest the formation of crystalline SBA powder at temperature as low as 259 °C, using urea in the combustion reaction whereas other fuels resulted in amorphous SBA phase and this variation in phase was found due to difference in exothermicity of the fuel used. Thermodynamic and spectroscopic analyses showed that the exothermicity of fuel depends on various factors like (i) standard heat of formation of fuel and (ii) the complexation offered by fuel to metal cations. Furthermore, sodium ?-alumina thin film capacitor (metal-insulator-metal) was also fabricated using urea via spray combustion synthesis. The sodium ?-alumina thin film showed a high dielectric value (?r) of ~21. © 2017 Elsevier Ltd and Techna Group S.r.l.Item A balancing between super transparency and conductivity of solution combustion derived titanium doped indium oxide: Effect of charge carrier density and mobility(Elsevier B.V., 2018) Pujar, P.; Vardhan, R.V.; Gupta, D.; Mandal, S.In this contribution, super transparent (~100%) and conducting In14Ti1O23 (Titanium doped Indium oxide; InTiO) films were reported via solution combustion processing with acetylacetone as fuel. Both bulk-powder and thin film systems were studied and revealed the efficacy of low temperature combustion synthesis which yielded crystalline InTiO powder at 150 °C and its film counterpart had shown pronounced crystalinity with temperature. Also, all films with varying annealing temperature were smooth with rms value ranging from 0.29 nm to 1.9 nm. In addition, the charge carrier density in all films found to be of the order 1019 cm?3, possessing highest transparency nearly equals to uncoated glass at an annealing temperature of 350 °C having maximum of ~67% metal-oxygen-metal framework (or lattice oxygen) confirmed via X-ray photoelectron spectroscopy. Also, the highest conductivity of 20 S/cm at an annealing temperature of 450 °C clearly conveyed the potential of solution combustion processing in the fabrication of ultra-transparent InTiO films with no sophistication in the film fabrication. © 2018Item Effect of annealing-temperature-assisted phase evolution on conductivity of solution combustion processed calcium vanadium oxide films(Springer, 2018) Manjunath, G.; Vardhan, R.V.; Salian, A.; Jagannatha, R.; Kedia, M.; Mandal, S.In thiswork, the effect of annealing temperature on the conductivity of solution-combustion-synthesized calcium vanadium oxide (CVO) films was studied. Conductivity was tailored by the appearance of the phases like CaVO3, CaV2O5 and Ca2V2O7 as a function of annealing temperature; CaVO3 and CaV2O5 are responsible for high conductivity, whereas V5+ presence in Ca2V2O7 contributes towards dielectric nature. Evolution of phases of CVO was identified through X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. A detailed conductivity measurement as a function of annealing temperature helps us to identify the decreasing trend of conductivity with increasing temperature up to 400°C; beyond this it behaves like an insulator. There was a stable conductivity while aging the films in ambient for a few days. This study revealed safe application temperature domain of CVO, and a clear correlation of electrical conductivity with the in-depth structural-compositional-morphological study. © Indian Academy of Sciences.Item High-performance low voltage operation of indium zinc tin oxide thin film transistors using chemically derived sodium ?-alumina dielectric(Springer, 2019) Pujar, P.; Gupta, D.; Mandal, S.We present high performance, low voltage (< 3 V) operation of thin film transistors (TFTs) with indium zinc tin oxide (IZTO: In4Sn4ZnO15)-semiconductor. The film of IZTO was fabricated via low-temperature (200 °C) solution combustion processing without incorporating an external fuel. As 2-methoxyethanol is a widely used organic solvent due to its high dissolution capability, serve the purpose of both the solvent and the fuel. On quantification from the balanced redox reaction, 0.3% of 2-methoxyethanol assisted for the action of fuel and helped in the formation of metal oxide, and the rest (99.7%) served the purpose of being dissolution medium. The balanced redox chemistry yielded a significant fraction of (56.5%) metal oxide at 200 °C confirmed via high-resolution oxygen 1 y spectrum. Further, the chemically derived thin film of sodium ss-alumina with a dielectric constant of ~ 21, while annealing at 350 °C incorporated in the TFT for the realization of low voltage operation. The performance assessment is systematically carried out both silicon dioxide (SiO2) and sodium ss-alumina and found that the TFTs with SiO2 and IZTO exhibited a saturation mobility (µ^), Ion/Ioff ratio and the threshold voltage (Vth) of 0.50 ± 0.02 cm2 V-1 s-1, 1.25 x 104 and 6.6 ± 0.79 V respectively. While changing the dielectric to sodium ss-alumina presented a µsat, Ion/Ioff ratio and Vth of 4.21 ± 0.18 cm2 V-1 s-1, 1.4 x 102 and 0.47 ± 0.08 V respectively. © Springer Science+Business Media, LLC, part of Springer Nature 2019.Item A scalable screen-printed high performance ZnO-UV and Gas Sensor: Effect of solution combustion(Elsevier Ltd, 2020) Manjunath, G.; Pujari, S.; Patil, D.R.; Mandal, S.In the present study, scalable screen-printed Zinc Oxide (ZnO) based sensor was demonstrated to sense ultra-violet irradiation and gases such as ammonia (NH3), ethanol (C2H5OH), liquefied petroleum gas (LPG), chlorine (Cl2) and hydrogen sulphide (H2S). A facile solution combustion synthesis (SCS) route was adopted to synthesize high purity, homogeneous, nanocrystalline and highly reactive ZnO with favourable morphologies, microstructural parameters for the sensing performance using low-cost and less-violent fuels such as urea, citric acid and glycine. Fuel impacts on uniform particle size distribution, bond length, grain size, lattice strain enhanced the gas sensing potential in the synthesized powders. Films were fabricated by depositing synthesized powders on the glass substrate via screen printing approach using Na-carboxy methyl cellulose as a binder, water as a solvent and annealed at 500 °C for 2 h in ambient. Non-stoichiometric, phase pure and adhered thick films with optical band gap (3.17-3.25 eV) imparted gas sensing properties because of recombination of an electron-hole pair and intrinsic defects. ZnO films obtained from glycine-fuel system exposed to 100 ppm of NH3, C2H5OH, Cl2 and 50 ppm of H2S, exhibited good gas sensitivity of ~8, 5, 3 and 10 at an operating temperature of 50, 100, 200 and 100 °C respectively with a faster response and recovery speed. But, high sensitivity ~6 to 100 ppm of LPG at 350 °C in ZnO films from citric acid fuel-system. ZnO films obtained from glycine fuel system showed a high response to UV irradiation for exposing time of 90s. Low cost, high-performance sensor can be fabricated for the dual applications - alarming to prolonged exposure to harmful UV radiation and detection of a series of toxic and damaging gases. © 2019 Elsevier LtdItem Ammonia gas detection by solution combustion-processed pristine & Ti-doped ZnO transparent films: a reverse effect of doping on gas response(Springer, 2023) Vardhan, R.V.; Manjunath, G.; Pothukanuri, P.; Mandal, S.In this contribution, pure, polycrystalline wurtzite crystal structured, spin-coated pristine ZnO and Ti-doped (1, 2, and 3 wt%) ZnO transparent films were accomplished at 400 °C through a facile solution combustion synthesis method. Crystallinity, roughness, and porosity in the pristine film were relatively higher than in the doped films. The demonstrated films were transparent, with ~ 70 to 90% in the visible region. The room temperature detection of ammonia (NH3) gas (25–100 ppm) was recognized in all the films. The pristine film revealed a superior gas response at every concentration of NH3 gas in contrast to all the doped films; it is probably due to comparatively high crystallinity, porosity, more oxygen vacancy concentration (1.788), and high fraction of adsorbed oxygen (20.55%). The film exhibited the highest gas response of 34.7 at 100 ppm of NH3 gas and a limit of detection of ~ 10.7 ppm with superior selectivity towards NH3 gas. Although doping enhanced the transparency but diminished the NH3 gas response due to the combined effect of deterioration in the mentioned properties achieved in pristine film. © 2023, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.Item Evolution of High Dielectric Permittivity in Low-Temperature Solution Combustion-Processed Phase-Pure High Entropy Oxide (CoMnNiFeCr)O for Thin Film Transistors(American Chemical Society, 2023) Salian, A.; Pujar, P.; Vardhan, R.V.; Cho, H.; Kim, S.; Mandal, S.An investigation of dielectric permittivity on the sintered high entropy oxide (HEO) capacitor composed of Co, Cr, Fe, Mn, and Ni (i.e., (CoCrFeMnNi)O) developed using solution combustion synthesis is performed. Stabilization of the phase in HEO is extremely important as it has a direct influence on the properties. In order to explore phase stabilization, in-depth studies of thermal, structural, morphological, and compositional analyses are carried out. The optimized processing parameters are further implemented on depositing (CoCrFeMnNi)O dielectric thin films followed by a thin film transistor. Irrespective of the reaction medium, the precursors undergo combustion at a low temperature below 250 °C, resulting in amorphous HEO. Upon crystallization at 500 °C, no secondary impurity oxides were detected and phase-stabilized to a spinel structure (Fd3m). A homogeneous distribution of all five cations without any segregation and a completely disordered occupancy of the cations were displayed by the bulk and thin films of HEOs. The spinel (CoCrFeMnNi)O exhibited high permittivity, with values approximately 7.3 × 102(in bulk) and 3 × 101(in a thin film), measured at 1 kHz owing to the entropy stabilization effect of HEO. Due to their high permittivity and low leakage current density (∼10-8A/cm2), the (CoMnNiFeCr)O thin film was integrated into thin film transistors (TFTs) with molybdenum disulfide-channel. TFTs showed a field effect mobility of 8.8 cm2V-1s-1, an on-off ratio of approximately 105, a threshold voltage of -1.5 V, and a subthreshold swing of 0.38 V/dec. The low voltage operation (<5 V) of these TFTs makes solution combustion-derived HEO (CoMnNiFeCr)O a potential candidate in microelectronics and optoelectronics applications. © 2023 ACS Applied Electronic Materials. All rights reserved.Item Tracing of Ammonia Gas by Solution-Combustion-Derived Pristine and Nb-Doped TiO2 Films: Beneficial Impact of Crystallinity and Adsorbed Oxygen on the Gas Response(Springer, 2023) Vardhan, R.V.; Manjunath, G.; Pothukanuri, P.; Mandal, S.The current work delivers room-temperature ammonia (NH3) gas-detectable pristine, Nb-doped TiO2 air- and vacuum-annealed films obtained through the solution-combustion process. Polycrystalline anatase crystal structured films without any dopant oxide phases were processed at 400°C on glass substrates. The crystallinity was higher in pristine films than in doped films; the morphological features were similar in all the films. The films were > 50% transparent, and the estimated optical energy band gap was greater in doped films than in pristine films. All the films detected NH3 gas (25 ppm to 100 ppm) at room temperature, and the gas response was highly dependent on the crystallinity and relative area fraction of adsorbed oxygen (% of OA). The vacuum-annealed pristine film exhibited a better gas response than the other films at all NH3 gas concentrations due to high crystallinity and % of OA (10.15%). The film demonstrated maximum gas response of ~16 towards 100 ppm of NH3 gas and displayed good selectivity. Even though the doping reduced the crystallite size from ~17 nm to ~9 nm, it also diminished the crystallinity of the films, which significantly impacted the deterioration of their gas response. © 2023, The Minerals, Metals & Materials Society.