Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Faster Biomineralization and Tailored Mechanical Properties of Marine-Resource-Derived Hydroxyapatite Scaffolds with Tunable Interconnected Porous Architecture(American Chemical Society service@acs.org, 2019) Hadagalli, K.; Panda, A.K.; Mandal, S.; Basu, B.Although hydroxyapatite (HA)-based porous scaffolds have been widely researched in the last three decades, the development of naturally derived biomimetic HA with a tunable elastic modulus and strength together with faster biomineralization properties has not yet been achieved. To address this specific issue, we report here a scalable biogenic synthesis approach to obtain submicron HA powders from cuttlefish bone. The marine-resource-derived HA together with different pore formers can be conventionally sintered to produce physiologically relevant scaffolds with porous architecture. Depending on pore formers, the scaffolds with a range of porosity of up to 51% with a larger range of pore sizes up to 50 ?m were fabricated. An empirical relationship between the compression strength and the elastic modulus with fractional porosity was established. A combination of moderate compressive strength (12-15 MPa) with an elastic modulus up to 1.6 GPa was obtained from cuttlefish-bone-derived HA with wheat flour as the pore former. Most importantly, the specific HA scaffold supports the faster nucleation and growth of the biomineralized apatite layer with full coverage within 3 days of incubation in simulated body fluid. More importantly, the marine-species-derived HA supported better adhesion and proliferation of murine osteoblast cells than HA sintered using powders from nonbiogenic resources. The spectrum of physical and biomineralization properties makes cuttlefish-bone-derived porous HA a new generation of implantable biomaterial for potential application in cancellous bone regeneration. © 2019 American Chemical Society.Item Enhancing Strength Properties of Hydroxyapatite Composites with Bentonite Clay(Taylor and Francis Ltd., 2025) Satish, P.; Hadagalli, K.; Nowl, M.S.; Siddeswara, R.; Kalikeri, S.; Mandal, S.The main inorganic component of human hard tissues is hydroxyapatite (HA, Ca10(PO4)6(OH)2) and the mechanical and biological performance of HA can be improved by incorporating clay minerals to create HA-clay composite scaffolds. This study demonstrates a high-strength biocomposite of HA and bentonite with a significant reduction of open porosity, considering bentonite clay for its biocompatibility. Prawn shells (Fenneropenaeus indicus - marine resource) were utilized as a sustainable source of calcium to synthesize high-purity HA through a wet-chemical process, offering an innovative approach to valorize bio-waste. HA-bentonite clay composites were made by compacting 10-40 wt% of bentonite clay with HA using uniaxial pressing, followed by sintering at 1100°C for 2 h. Characterization techniques like X-ray diffraction, Raman, Fourier transform infrared spectroscopy and field emission scanning electron microscopy verified the phases, structures, vibrational bonds and morphology of the synthesized materials. Energy dispersive X-ray spectroscopy and inductively coupled plasma mass spectrometry analysis were performed for elemental composition and heavy metal detection, respectively. The HA-bentonite (30 wt%) composite achieved an exceptional compressive strength of 155 MPa and an open porosity of 7%, surpassing bare HA. Adding 30% bentonite increased compressive strength six fold and decreased open porosity by 51% compared to bare HA. This novel approach to HA-bentonite scaffolds promises enhanced wear resistance and cellular proliferation in bone tissue engineering. © 2025 Indian Ceramic Society.