Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Mahesh, V.Subject: search.filters.subject.Compression testing

Search Results

Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Experimental investigation of the in-plane quasi-static mechanical behaviour of additively-manufactured polyethylene terephthalate/organically modified montmorillonite nanoclay composite auxetic structures
    (SAGE Publications Ltd, 2023) Mahesh, V.; Maladkar, P.G.; Sadaram, G.S.S.; Joseph, A.; Mahesh, V.; Harursampath, D.
    Apart from the inherent anomalous behaviour under tensile and compressive structures, auxetic structures have shown improved energy absorption characteristics that are of prime interest to various fields of study. This is further exemplified by additive manufacturing (AM) techniques and polymer composites to tailor the shape, geometry and form of these structures. Consequently, this paper aims to characterise the in-plane compressive behaviour and negative Poisson’s ratio (NPR) of the most prominent auxetic structures fabricated additively used polymer nanocomposite materials. The study incorporates the use of glycol-modified polyethylene terephthalate (PETG) and nanocomposites of PETG filled with organically modified montmorillonite (OMMT) nanoclay particles to produce auxetic structures fabricated through fused filament fabrication (FFF). Different structures such as hexagonal re-entrant honeycomb structures, peanut-shaped honeycombs, chiral honeycomb structures and missing rib structures are characterised for their compressive performance through experimental approaches involving mechanical testing and digital image correlation (DIC). Different parameters such as the peak crushing strength, average crushing strength, NPR, specific energy absorption (SEA), and crush force efficiency (CFE) of these structures are evaluated at different strain rates/loading rates for varying concentrations of nanoclay and PETG. It is observed that higher loadings of nanoclay particles lower the compressive strength of the structures. Additionally, the NPR decreases with increasing strain rates and is also influenced by the composition and the resultant stiffness. Moreover, the geometrical parameters of the structure largely influence its strain energy absorption. The results have shown that such material-structure combinations can produce structures of high-performance capabilities suitable for aerospace applications. © The Author(s) 2022.
  • No Thumbnail Available
    Item
    Experimentation on dynamic compressive response of bio-inspired helicoidal structured Basalt/Hemp/polyurethane rubber sandwich composites
    (Elsevier Ltd, 2024) Gowda, D.; Mahesh, V.; Mahesh, V.; Ravishankar, K.S.
    In this article, to incorporate sustainability, enhance recyclability and achieve a good trade-off between the cost-weight-energy absorption performance, bioinspired helicoidal structured Basalt (B)/Hemp (H)/Polyurethane (PU) rubber hybrid composites are proposed, and their dynamic compressive response is experimentally investigated using a split Hopkinson pressure bar (SHPB) setup. These composites' high strain rate performance subjected to both in-plane and through-plane directions are studied. The strain rates ranging from 4254 to 10,750 s-1 are achieved by varying the striker bar's input pressure. In addition, the performance of the bioinspired helicoidal design is compared against the uniform monolithic and hybridised fibers laminated structures. The experimental results suggest that the dynamic compressive properties of Basalt/Hemp-helicoidal (BH-helicoidal) laminates were on compar with that of B-laminates, achieving an almost 30% weight reduction. The optimised fiber orientation at a helical angle of 120 enhances interlaminar shear strength, mitigating buckling and delamination failures, thereby improving BH-helicoidal laminate's structural integrity and dynamic compressive properties. Further, the through-plane dynamically loaded samples displayed better compressive properties due to increased stiffness than in-plane samples. The PU rubber matrix was thermally softened at higher strain rates, enhancing the flow stress. The strengthening mechanism of the proposed composites was evaluated through Cowper-Symonds, strain rate sensitivity, and thermal activation volume parameter. Macroscopic and microscopic imaging was proposed to understand the damage behaviour of laminates as a function of loading direction. Overall, BH-helicoidal laminate is favoured for ballistic application due to its cost-effectiveness and sustainable design. © 2024 Elsevier Ltd