Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Synergism of graphitic-carbon nitride and electrospinning on the physico-chemical characteristics and piezoelectric properties of flexible poly(vinylidene fluoride) based nanogenerator(Springer Netherlands rbk@louisiana.edu, 2019) Khalifa, M.; Mahendran, A.; Anandhan, S.Herein, we investigated the piezoelectric performance of electrospun poly(vinylidene fluoride)/graphitic carbon nitride (PVDF/g-C 3 N 4 ) nanocomposite fibers (PGN-X). Addition of g-C 3 N 4 nanosheets improved the spinnability of nanofibers and augmented the ?-phase content of PVDF. The synthesized PGN non-woven mats were flexible and easily deformable without disrupting the continuity of fibers. Upon the addition of g-C 3 N 4 , tensile strength and thermal stability of nanocomposite fibers improved significantly. A maximum voltage output of ~7.5 V was generated for PGN nanogenerator which is ~8 times more than that of PVDF nanogenerator. Also, the PGN-X nanogenerator generated current output of 0.23 ?A and a power density of 0.22 ?W/cm ?2 . Improved physico-chemical characteristics and piezoelectric performance of PGN nanogeneratoris promising and makes it suitable for portable electronic and wearable devices. © 2019, The Polymer Society, Taipei.Item Durable, efficient, and flexible piezoelectric nanogenerator from electrospun PANi/HNT/PVDF blend nanocomposite(John Wiley and Sons Inc. cs-journals@wiley.com, 2019) Khalifa, M.; Mahendran, A.; Anandhan, S.Currently, there is considerable research focus on portable, lightweight, shock-resistant, and inexpensive wearable devices that are ideally powered by harvesting abundant mechanical or vibration energy, making battery or related wiring superfluous. In this study, piezoelectric nanogenerator was electrospun from PANi (polyaniline)/HNT (halloysite nanotube)/PVDF (poly[vinylidene fluoride]) blend nanocomposite. Polymorphism, crystallinity and morphology of the nanogenerator were explored in detail. HNT and PANi acted as a nucleating agent and conductive filler, respectively in PVDF; their synergism helps improve the piezoelectric performance of PVDF. The piezoelectric performance of the nanogenerator patch was studied under various external mechanical stresses, such as pressure, tapping, and impact. A maximum voltage output of approximately 7.2 V was generated by the nanogenerator under impact. The nanogenerator patch attached to human arm exhibited not only excellent piezoelectric response during arm movements, but, also proved to be flexible, highly sensitive and durable. This nanogenerator could possibly be used in wearable piezoelectric energy conversion application for self-powered devices. POLYM. COMPOS., 40:1663–1675, 2019. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics EngineersItem Polymorphism, dielectric and piezoelectric response of organo-modified Ni–Co layered double hydroxide nanosheets dispersed electrospun PVDF nanofabrics(Springer, 2019) Shetty, S.; Ekbote, G.S.; Mahendran, A.; Anandhan, S.Poly(vinylidene fluoride) (PVDF) with excellent flexibility and electroactive properties is a promising material for energy harvesting. In this study, organically modified Ni–Co layered double hydroxide (OLDH) was synthesized and the nanosheets of this OLDH were used as filler in electrospun PVDF nanofabrics. Morphology, crystallinity, dielectric, and piezoelectric properties of the electrospun nanofabrics were characterized. Presence of OLDH in PVDF nanofabrics led to enhancement of polar ?-phase in the latter, which was corroborated from the results of Fourier transform infrared spectroscopy and X-ray diffraction. Dielectric constant of the nanofabrics tends to increase with OLDH content, while the corresponding dielectric loss remained low. An indigenously designed nanogenerator from these nanofabrics exhibited a maximum output voltage of 6.9 V and power density of 0.92 ?W/cm2 under human finger tapping mode at 3 wt% loading of OLDH. The synergistic effect of OLDH and electrospinning contributed to the enhancement of the ?-phase content, thereby the piezoelectric response of the composite nanofabrics. The demonstrated nanogenerator could possibly power flexible and portable electronic devices. © 2019, Springer Science+Business Media, LLC, part of Springer Nature.Item Cationic surfactant assisted enhancement of dielectric and piezoelectric properties of PVDF nanofibers for energy harvesting application(Royal Society of Chemistry, 2021) Ekbote, G.S.; Khalifa, M.; Mahendran, A.; Anandhan, S.Poly(vinylidene fluoride) (PVDF) is among the most versatile polymers due to its wide range of properties, including dielectric, piezoelectric and ferroelectric properties. However, more frequently than not a range of processing routes and/or additives have been used to enhance such properties. In this study, PVDF nanofibers were electrospun from PVDF solution that contained tetra-n-butyl ammonium chloride (TBAC) at different loadings (1, 2, 3, and 5 wt%). The effect of TBAC on the morphology, crystallinity, and polymorphism of PVDF was studied using various characterization techniques. Addition of TBAC significantly improved the electroactive ?-phase of PVDF. The highest ?-phase content of 89% was attained at a TBAC loading of 3 wt%. Consequently, the dielectric and piezoelectric properties of the PVDF nanofibers improved significantly. A nanogenerator fabricated using 3 wt% TBAC/PVDF nanofibers exhibited the maximum voltage output of 17.2 V (under 5 N force) and the maximum power density of ?1.4 ?W cm?2(under 3 N force). Improved dielectric and piezoelectric properties of PVDF upon the addition of a small amount of TBAC could be useful for researchers in upbringing the material for flexible electronic devices. © The Royal Society of Chemistry 2021.