Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Use of nano-ATH as a multi-functional additive for poly(ethylene-co-vinyl acetate-co-carbon monoxide)(Springer Verlag service@springer.de, 2014) George, G.; Mahendran, A.; Anandhan, S.Flame retardant aluminum hydroxide (ATH) nanoparticles of size ?10-20 nm were dispersed in ethylene-vinyl acetate-carbon monoxide terpolymer (EVACO) via solution casting. The effect of filler loading on the crystallizability, thermal, mechanical, flammability, optical and electrical properties of EVACO was evaluated. At 1 % filler loading nano-ATH particles exhibited very good dispersibility in the EVACO matrix and the % crystallinity of EVACO is the highest at this filler loading. The changes in crystallinity were studied by X-ray diffractometry and differential scanning calorimetry. The highest tensile strength was observed for the composite with 1 % nano-ATH loading, which has the best filler dispersion, and the decay in the tensile properties at higher filler loading is due to agglomerations of ATH nanoparticles and polymer-filler interface debonding. The UV absorption of these composites is augmented irrespective of the nano-ATH loading and ATH emerges as a good absorber of UV light. The DC electrical conductivity study of the composites proves that the addition nano-ATH is an efficient way to improve the dielectric properties of EVACO. The presence of nano-ATH improves the flame retardance of these composites. © 2014 Springer-Verlag Berlin Heidelberg.Item Probing the synergism of halloysite nanotubes and electrospinning on crystallinity, polymorphism and piezoelectric performance of poly(vinylidene fluoride)(Royal Society of Chemistry, 2016) Khalifa, M.; Mahendran, A.; Anandhan, S.Poly(vinylidene fluoride) (PVDF) nanofibers have tremendous potential in nano-sensing and energy scavenging applications. In this study, uniaxially aligned nanofibers were developed from halloysite nanotubes (HNT)/PVDF nanocomposite using electrospinning technique. Incorporation of HNT into PVDF not only reduced the diameter of the electrospun nanofibers, but, also improved their morphology. Fourier transform infrared spectroscopy, wide angle X-ray diffraction and differential scanning calorimetry techniques were used to characterize the crystallinity, polymorphism and polymer-filler interaction in the nanocomposite nanofibers. A force sensor was indigenously designed to study the piezoelectric responses of the nanocomposite nanofibers. At 10 wt% of HNT loading, the sensor produced the highest voltage output, which can be ascribed to its highest ?-phase content. Incorporation of HNT and use of electrospinning synergistically enhanced the ?-phase content and hence the piezoelectric behavior of PVDF. Hence, these nanofibers could be promising and prominent materials in sensor and actuator applications. © The Royal Society of Chemistry.Item Structure-property relationship of halloysite nanotubes/ethylene-vinyl acetate-carbon monoxide terpolymer nanocomposites(SAGE Publications Ltd info@sagepub.co.uk, 2017) George, G.; SelvaKumar, M.; Mahendran, A.; Anandhan, S.Poly(ethylene-co-vinyl acetate-co-carbon monoxide) (EVACO)/halloysite nanotube (HNT) nanocomposite films were solution cast. Dispersion of HNTs in the matrix was analyzed by elemental mapping and the role of HNTs on crystallizability, flammability and thermal, mechanical, and electrical properties of the polymer was evaluated. The nature of interaction between the EVACO matrix and HNTs was studied using Fourier transform infrared spectroscopy. The highest tensile strength was observed for the composite with 1% filler loading, whereas the highest crystallinity was observed for that with 3% filler loading. The decay in the tensile properties at higher filler loading was due to agglomeration of HNTs and debonding of polymer-filler interface. The electrical volume resistivity of the composites decreased with HNT loading because of the ionic charge transfer. The direct current electrical resistivity study of the composites proves that the addition of HNT can improve the antistatic properties of the polymer. © The Author(s) 2015.Item Synergism of graphitic-carbon nitride and electrospinning on the physico-chemical characteristics and piezoelectric properties of flexible poly(vinylidene fluoride) based nanogenerator(Springer Netherlands rbk@louisiana.edu, 2019) Khalifa, M.; Mahendran, A.; Anandhan, S.Herein, we investigated the piezoelectric performance of electrospun poly(vinylidene fluoride)/graphitic carbon nitride (PVDF/g-C 3 N 4 ) nanocomposite fibers (PGN-X). Addition of g-C 3 N 4 nanosheets improved the spinnability of nanofibers and augmented the ?-phase content of PVDF. The synthesized PGN non-woven mats were flexible and easily deformable without disrupting the continuity of fibers. Upon the addition of g-C 3 N 4 , tensile strength and thermal stability of nanocomposite fibers improved significantly. A maximum voltage output of ~7.5 V was generated for PGN nanogenerator which is ~8 times more than that of PVDF nanogenerator. Also, the PGN-X nanogenerator generated current output of 0.23 ?A and a power density of 0.22 ?W/cm ?2 . Improved physico-chemical characteristics and piezoelectric performance of PGN nanogeneratoris promising and makes it suitable for portable electronic and wearable devices. © 2019, The Polymer Society, Taipei.Item Durable, efficient, and flexible piezoelectric nanogenerator from electrospun PANi/HNT/PVDF blend nanocomposite(John Wiley and Sons Inc. cs-journals@wiley.com, 2019) Khalifa, M.; Mahendran, A.; Anandhan, S.Currently, there is considerable research focus on portable, lightweight, shock-resistant, and inexpensive wearable devices that are ideally powered by harvesting abundant mechanical or vibration energy, making battery or related wiring superfluous. In this study, piezoelectric nanogenerator was electrospun from PANi (polyaniline)/HNT (halloysite nanotube)/PVDF (poly[vinylidene fluoride]) blend nanocomposite. Polymorphism, crystallinity and morphology of the nanogenerator were explored in detail. HNT and PANi acted as a nucleating agent and conductive filler, respectively in PVDF; their synergism helps improve the piezoelectric performance of PVDF. The piezoelectric performance of the nanogenerator patch was studied under various external mechanical stresses, such as pressure, tapping, and impact. A maximum voltage output of approximately 7.2 V was generated by the nanogenerator under impact. The nanogenerator patch attached to human arm exhibited not only excellent piezoelectric response during arm movements, but, also proved to be flexible, highly sensitive and durable. This nanogenerator could possibly be used in wearable piezoelectric energy conversion application for self-powered devices. POLYM. COMPOS., 40:1663–1675, 2019. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics Engineers