Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Mahendran, A.Subject: search.filters.subject.Ethylene

Search Results

Now showing 1 - 4 of 4
  • No Thumbnail Available
    Item
    Use of nano-ATH as a multi-functional additive for poly(ethylene-co-vinyl acetate-co-carbon monoxide)
    (Springer Verlag service@springer.de, 2014) George, G.; Mahendran, A.; Anandhan, S.
    Flame retardant aluminum hydroxide (ATH) nanoparticles of size ?10-20 nm were dispersed in ethylene-vinyl acetate-carbon monoxide terpolymer (EVACO) via solution casting. The effect of filler loading on the crystallizability, thermal, mechanical, flammability, optical and electrical properties of EVACO was evaluated. At 1 % filler loading nano-ATH particles exhibited very good dispersibility in the EVACO matrix and the % crystallinity of EVACO is the highest at this filler loading. The changes in crystallinity were studied by X-ray diffractometry and differential scanning calorimetry. The highest tensile strength was observed for the composite with 1 % nano-ATH loading, which has the best filler dispersion, and the decay in the tensile properties at higher filler loading is due to agglomerations of ATH nanoparticles and polymer-filler interface debonding. The UV absorption of these composites is augmented irrespective of the nano-ATH loading and ATH emerges as a good absorber of UV light. The DC electrical conductivity study of the composites proves that the addition nano-ATH is an efficient way to improve the dielectric properties of EVACO. The presence of nano-ATH improves the flame retardance of these composites. © 2014 Springer-Verlag Berlin Heidelberg.
  • No Thumbnail Available
    Item
    Thermodynamic miscibility and thermal and mechanical properties of poly(ethylene-co-vinyl acetate-co-carbon monoxide)/poly(vinyl chloride) blends
    (John Wiley and Sons Inc, 2015) SelvaKumar, M.; Mahendran, A.; Bhagabati, P.; Anandhan, S.
    This paper reports the miscibility and thermal and mechanical properties of solution cast binary blends of poly(ethylene-co-vinyl acetate-co-carbon monoxide) (EVACO) and poly(vinyl chloride) (PVC). The composition of these blends was varied from 10:90 to 90:10 of PVC/EVACO (w/w %). Fourier transform infrared spectroscopy revealed an extensive intermolecular attraction between the blend components, which accounts for their mutual solubility. The differential scanning calorimetry study revealed that the blend components are miscible with each other in all proportions as they exhibited a single glass transition temperature. Tensile strength, moduli, and thermal stabilities of these blends significantly improved with increasing proportion of PVC. © 2014 Wiley Periodicals, Inc.
  • No Thumbnail Available
    Item
    Nanostructured Fly Ash as Reinforcement in a Plastomer-Based Composite: A New Strategy in Value Addition to Thermal Power Station Fly Ash
    (Springer Netherlands, 2016) Patil, A.G.; Mahendran, A.; Anandhan, S.
    Class-F fly ash (FA) from a coal-fired thermal power station was subjected to high energy ball milling-induced mechanochemical activation aided by a surfactant. Subsequently, ethylene-octene copolymer/mechanochemically activated FA (EOC/MCA-FA) composites were prepared by solution casting. The surface modification of FA was confirmed from contact angle measurements and FTIR spectroscopy, which accounts for a good interaction between MCA-FA and the polymer matrix. X-ray diffraction reveals that the crystallite size of quartz phase present in FA got reduced, while the relative lattice strain on it increased during milling. Morphological studies revealed that interfacial adhesion between the polymer and MCA-FA is good and this accounts for the improvement in mechanical properties of the composites even at the minimum filler loading. Flame retardance of the matrix polymer is improved by the addition of either fresh FA or MCA-FA. The results imply that FA is a valuable reinforcing filler for ethylene-octene copolymer and its mechanochemical activation is an effective strategy for its future use. © 2014, Springer Science+Business Media Dordrecht.
  • No Thumbnail Available
    Item
    Structure-property relationship of halloysite nanotubes/ethylene-vinyl acetate-carbon monoxide terpolymer nanocomposites
    (SAGE Publications Ltd info@sagepub.co.uk, 2017) George, G.; SelvaKumar, M.; Mahendran, A.; Anandhan, S.
    Poly(ethylene-co-vinyl acetate-co-carbon monoxide) (EVACO)/halloysite nanotube (HNT) nanocomposite films were solution cast. Dispersion of HNTs in the matrix was analyzed by elemental mapping and the role of HNTs on crystallizability, flammability and thermal, mechanical, and electrical properties of the polymer was evaluated. The nature of interaction between the EVACO matrix and HNTs was studied using Fourier transform infrared spectroscopy. The highest tensile strength was observed for the composite with 1% filler loading, whereas the highest crystallinity was observed for that with 3% filler loading. The decay in the tensile properties at higher filler loading was due to agglomeration of HNTs and debonding of polymer-filler interface. The electrical volume resistivity of the composites decreased with HNT loading because of the ionic charge transfer. The direct current electrical resistivity study of the composites proves that the addition of HNT can improve the antistatic properties of the polymer. © The Author(s) 2015.