Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Removal of ammonia and particulate matter using a modified turbulent wet scrubbing system(2012) Byeon, S.-H.; Lee, B.-K.; Raj Mohan, B.Conventional scrubbers are typically modified to serve the needs of modern industries that discharge effluents that cause synergetic, adverse effects on the environment. We designed and developed a modified turbulent wet scrubber (MTWS) to remove air pollutants as they emerge from a coal furnace. Experiments were conducted to estimate the pressure drop and the efficiencies of ammonia gas and particulate removal via the MTWS. The optimum water levels and gas flow rates for effective scrubbing of ammonia gas at different concentrations and particulate matter at different feed rates were estimated. For ammonia gas at a concentration of 45 ppm, a gas flow rate of 3.5 m 3/s and a water level of 58 cm in MTWS and position B (central position of the nozzle) in the water level of the nozzle yielded efficient ammonia gas removal for the given time. Similarly, for a fly ash feeding rate of 140 mg/min, the same gas flow rate and water level in the MTWS yielded high efficiencies even for particles at the submicron level. © 2012 Elsevier B.V. All rights reserved.Item Evaluating the performance of a turbulent wet scrubber for scrubbing particulate matter(Taylor and Francis Inc. 325 Chestnut St, Suite 800 Philadelphia PA 19106, 2013) Lee, B.-K.; Raj Mohan, B.; Byeon, S.-H.; Lim, K.-S.; Hong, E.-P.A turbulent wet scrubber was designed and developed to scrub particulate matter (PM) at micrometer and submicrometer levels from the effluent gas stream of an industrial coal furnace. Experiments were conducted to estimate the particle removal efficiency of the turbulent scrubber with different gas flow rates and liquid heads above the nozzle. Particles larger than 1 ?m were removed very efficiently, at nearly 100%, depending upon the flow rate, the concentration of the dust-laden air stream, and the water level in the reservoir. Particles smaller than 1 ?m were also removed to a greater extent at higher gas flow rates and for greater liquid heads. Pressure-drop studies were also carried out to estimate the energy consumed by the scrubber for the entire range of particle sizes distributed in the carrier gas. A maximum pressure drop of 217 mm H2O was observed for a liquid head of 36 cm and a gas flow rate of 7 m3/min. The number of transfer units (NTU) analysis for the efficiencies achieved by the turbulent scrubber over the range of particles also reveals that the contacting power achieved by the scrubber is better except for smaller particles. The turbulent scrubber is more competent for scrubbing particulate matter, in particular PM2.5, than other higher energy or conventional scrubbers, and is comparable to other wet scrubbers of its kind for the amount of energy spent. Copyright © 2013 A&WMA.