Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Engine gearbox fault diagnosis using machine learning approach(Emerald Group Publishing Ltd. Howard House Wagon Lane, Bingley BD16 1WA, 2018) Vernekar, K.; Kumar, H.; Gangadharan, K.V.Purpose: Bearings and gears are major components in any rotatory machines and, thus, gained interest for condition monitoring. The failure of such critical components may cause an increase in down time and maintenance cost. Condition monitoring using the machine learning approach is a conceivable solution for the problem raised during the operation of the machinery system. The paper aims to discuss these issues. Design/methodology/approach: This paper aims engine gearbox fault diagnosis based on a decision tree and artificial neural network algorithm. Findings: The experimental result (classification accuracy 85.55 percent) validates that the proposed approach is an effective method for engine gearbox fault diagnosis. Originality/value: This paper attempts to diagnose the faults in engine gearbox based on the machine learning approach with the combination of statistical features of vibration signals, decision tree and multi-layer perceptron neural network techniques. © 2018, Emerald Publishing Limited.Item Fault diagnosis of internal combustion engine gearbox using vibration signals based on signal processing techniques(Emerald Group Holdings Ltd., 2020) Kn, R.; Kumar, H.; Gn, K.; Kv, G.Purpose: The purpose of this paper is to study the fault diagnosis of internal combustion (IC) engine gearbox using vibration signals with signal processing and machine learning (ML) techniques. Design/methodology/approach: Vibration signals from the gearbox are acquired for healthy and induced faulty conditions of the gear. In this study, 50% tooth fault and 100% tooth fault are chosen as gear faults in the driver gear. The acquired signals are processed and analyzed using signal processing and ML techniques. Findings: The obtained results show that variation in the amplitude of the crankshaft rotational frequency (CRF) and gear mesh frequency (GMF) for different conditions of the gearbox with various load conditions. ML techniques were also employed in developing the fault diagnosis system using statistical features. J48 decision tree provides better classification accuracy about 85.1852% in identifying gearbox conditions. Practical implications: The proposed approach can be used effectively for fault diagnosis of IC engine gearbox. Spectrum and continuous wavelet transform (CWT) provide better information about gear fault conditions using time–frequency characteristics. Originality/value: In this paper, experiments are conducted on real-time running condition of IC engine gearbox while considering combustion. Eddy current dynamometer is attached to output shaft of the engine for applying load. Spectrum, cepstrum, short-time Fourier transform (STFT) and wavelet analysis are performed. Spectrum, cepstrum and CWT provide better information about gear fault conditions using time–frequency characteristics. ML techniques were used in analyzing classification accuracy of the experimental data to detect the gearbox conditions using various classifiers. Hence, these techniques can be used for detection of faults in the IC engine gearbox and other reciprocating/rotating machineries. © 2020, Emerald Publishing Limited.