Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Fault diagnosis of helical gear box using decision tree through vibration signals(RAMS Consultants, 2013) Sugumaran, V.; Jain, D.; Amarnath, M.; Kumar, H.This paper uses vibration signals acquired from gears in good and simulated faulty conditions for the purpose of fault diagnosis through machine learning approach. The descriptive statistical features were extracted from vibration signals and the important ones were selected using decision tree (dimensionality reduction). The selected features were then used for classification using J48 decision tree algorithm. The paper also discusses the effect of various parameters on classification accuracy. © RAMS Consultants.Item Engine gearbox fault diagnosis using empirical mode decomposition method and Naïve Bayes algorithm(Springer India sanjiv.goswami@springer.co.in, 2017) Vernekar, K.; Kumar, H.; Gangadharan, K.V.This paper presents engine gearbox fault diagnosis based on empirical mode decomposition (EMD) and Naïve Bayes algorithm. In this study, vibration signals from a gear box are acquired with healthy and different simulated faulty conditions of gear and bearing. The vibration signals are decomposed into a finite number of intrinsic mode functions using the EMD method. Decision tree technique (J48 algorithm) is used for important feature selection out of extracted features. Naïve Bayes algorithm is applied as a fault classifier to know the status of an engine. The experimental result (classification accuracy 98.88%) demonstrates that the proposed approach is an effective method for engine fault diagnosis. © 2017, Indian Academy of Sciences.Item Condition monitoring of single point cutting tools based on machine learning approach(International Institute of Acoustics and Vibrations P O Box 13 Auburn AL 36831, 2018) Gangadhar, N.; Kumar, H.; Narendranath, S.; Sugumaran, V.This paper presents the use of multilayer perceptron (MLP) for fault diagnosis through a histogram feature extracted from vibration signals of healthy and faulty conditions of single point cutting tools. The features were extracted from the vibration signals, which were acquired while machining with healthy and different worn-out tool conditions. Principle component analysis (PCA) used to select important extracted features. The artificial neural network (ANN) algorithm was applied as a fault classifier in order to know the status of cutting tool conditions. The accuracy of classification with MLP was found to be 82.5 %, which validates that the proposed approach is an effective method for fault diagnosis of single point cutting tools. © 2018 International Institute of Acoustics and Vibrations. All Rights Reserved.Item Engine gearbox fault diagnosis using machine learning approach(Emerald Group Publishing Ltd. Howard House Wagon Lane, Bingley BD16 1WA, 2018) Vernekar, K.; Kumar, H.; Gangadharan, K.V.Purpose: Bearings and gears are major components in any rotatory machines and, thus, gained interest for condition monitoring. The failure of such critical components may cause an increase in down time and maintenance cost. Condition monitoring using the machine learning approach is a conceivable solution for the problem raised during the operation of the machinery system. The paper aims to discuss these issues. Design/methodology/approach: This paper aims engine gearbox fault diagnosis based on a decision tree and artificial neural network algorithm. Findings: The experimental result (classification accuracy 85.55 percent) validates that the proposed approach is an effective method for engine gearbox fault diagnosis. Originality/value: This paper attempts to diagnose the faults in engine gearbox based on the machine learning approach with the combination of statistical features of vibration signals, decision tree and multi-layer perceptron neural network techniques. © 2018, Emerald Publishing Limited.Item Fault diagnosis of antifriction bearing in internal combustion engine gearbox using data mining techniques(Springer, 2022) Ravikumar, K.N.; Aralikatti, S.S.; Kumar, H.; Kumar, G.N.; Gangadharan, K.V.Ball bearing failure are most common failure in rotating machinery, which can be catastrophic. Hence obtaining early failure warning along with precise fault detection technique is at most important. Early detection and timely intervention are the key in condition monitoring for long term endurance of machine components. The early research has used signal processing and spectral analysis extensively for fault detection however data mining with machine learning is most effective in fault diagnosis, the same is presented in this paper. The vibration signals are acquired for an output shaft antifriction bearing in a two-wheeler gearbox operated at various loading conditions with healthy and fault conditions. Data mining is employed for these acquired signals. Statistical, discrete wavelet and empirical mode decomposition are employed for feature extraction process and J48 decision tree for feature selection. Classification is carried out using K*, Random forest and support vector machine algorithm. The classifiers are trained and tested using tenfold cross validation method to diagnose the bearing fault. A comparative study of feature extraction and classifiers are done to evaluate the classification accuracy. The results obtained from K* classifier with wavelet feature yielded better accuracy than rest other classifiers with classification accuracy 92.5% for bearing fault diagnosis. © 2021, The Society for Reliability Engineering, Quality and Operations Management (SREQOM), India and The Division of Operation and Maintenance, Lulea University of Technology, Sweden.