Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item An approach for characterizing twin-tube shear-mode magnetorheological damper through coupled FE and CFD analysis(Springer Verlag service@springer.de, 2018) Gurubasavaraju, T.M.; Kumar, H.; Mahalingam, A.The most promising technology in the field of semi-active suspension systems is the use of magnetorheological property of MR fluid, whose material behavior can be controlled through external magnetic field. Devices developed based on this principle are adaptive and controllable as desired for a specific application. It is important to understand the damping characteristics of these devices before employing them, using experimental or computational approaches. In the present work, both experimental and computational methods have been adopted for characterizing a twin-tube MR damper with an intention to develop a computational approach as an alternative to experimental test in the preliminary design stage. Initially, experimental characterization of MR damper was carried out at 1.5 and 2 Hz frequencies for damper stroke length of ± 5 mm under different DC currents ranging from 0.1 to 0.4 A. Later, coupled finite-element and computational fluid dynamic analysis has been carried out to estimate the damping force under same conditions as used in the experiment. The results of computation are in good agreement with experimental ones. Furthermore, using this computational approach, the damping force at different frequencies of 1.5, 2, 3, and 4 Hz has been estimated and its time histories are also plotted. The influence of fluid flow gap on the damping force has been determined and results revealed that damping force behaves inversely with fluid flow gap. © 2018, The Brazilian Society of Mechanical Sciences and Engineering.Item Performance analysis of a semi-active suspension system using coupled CFD-FEA based non-parametric modeling of low capacity shear mode monotube MR damper(SAGE Publications Ltd, 2019) Gurubasavaraju, G.; Kumar, H.; Mahalingam, A.In this work, an approach for formulation of a non-parametric-based polynomial representative model of magnetorheological damper through coupled computational fluid dynamics and finite element analysis is presented. Using this, the performance of a quarter car suspension subjected to random road excitation is estimated. Initially, prepared MR fluid is characterized to obtain a relationship between the field-dependent shear stress and magnetic flux density. The amount of magnetic flux induced in the shear gap of magnetorheological damper is computed using finite element analysis. The computed magnetic field is used in the computational fluid dynamic analysis to calculate the maximum force induced under specified frequency, displacement and applied current using ANSYS CFX software. Experiments have been conducted to verify the credibility of the results obtained from computational analysis, and a comparative study has been made. From the comparison, it was found that a good agreement exists between experimental and computed results. Furthermore, the influence of fluid flow gap length and frequency on the induced force of the damper is investigated using the computational methods (finite element analysis and computational fluid dynamic) for various values. This proposed approach would serve in the preliminary design for estimation of magnetorheological damper dynamic performance in semi-active suspensions computationally prior to experimental analysis. © IMechE 2018.