Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Fault diagnosis of helical gear box using decision tree through vibration signals(RAMS Consultants, 2013) Sugumaran, V.; Jain, D.; Amarnath, M.; Kumar, H.This paper uses vibration signals acquired from gears in good and simulated faulty conditions for the purpose of fault diagnosis through machine learning approach. The descriptive statistical features were extracted from vibration signals and the important ones were selected using decision tree (dimensionality reduction). The selected features were then used for classification using J48 decision tree algorithm. The paper also discusses the effect of various parameters on classification accuracy. © RAMS Consultants.Item Condition monitoring of roller bearing by K-star classifier and K-nearest neighborhood classifier using sound signal(Tech Science Press sale@techscience.com, 2017) Sharma, R.K.; Sugumaran, V.; Kumar, H.; Amarnath, M.Most of the machineries in small or large scale industry have rotating element supported by bearings for rigid support and accurate movement. For proper functioning of machinery, condition monitoring of the bearing is very important. In present study sound signal is used to continuously monitor bearing health as sound signals of rotating machineries carry dynamic information of components. There are numerous studies in literature that are reporting superiority of vibration signal of bearing fault diagnosis. However, there are very few studies done using sound signal. The cost associated with condition monitoring using sound signal (Microphone) is less than the cost of transducer used to acquire vibration signal (Accelerometer). This paper employs sound signal for condition monitoring of roller bearing by K-star classifier and k-nearest neighborhood classifier. The statistical feature extraction is performed from acquired sound signals. Then two layer feature selection is done using J48 decision tree algorithm and random tree algorithm. These selected features were classified using K-star classifier and k-nearest neighborhood classifier and parametric optimization is performed to achieve the maximum classification accuracy. The classification results for both K-star classifier and k-nearest neighborhood classifier for condition monitoring of roller bearing using sound signals were compared. © Copyright 2017 Tech Science Press.Item Gearbox fault diagnosis based on Multi-Scale deep residual learning and stacked LSTM model(Elsevier B.V., 2021) Ravikumar, K.N.; Yadav, A.; Kumar, H.; Gangadharan, K.V.; Narasimhadhan, A.V.Fault diagnosis methods based on signal analysis techniques are widely used to diagnose faults in gear and bearing. This paper introduces a fault diagnosis model that includes a multi-scale deep residual learning with a stacked long short-term memory (MDRL-SLSTM) to address sequence data in a gearbox health prediction task in an internal combustion (IC) engine. In the MDRL-SLSTM network, CNN and residual learning is firstly utilized for local feature extraction and dimension reduction. The experiment is carried out on the gearbox of an IC engine setup, two datasets are used; one is from bearing and the other from 2nd driving gear of gearbox. To reduce the number of parameters, down-sampling is carried out on input data before giving to the architecture. The model achieved better diagnostic performance with vibration data of gearbox. Classification accuracy of 94.08% and 94.33% are attained on bearing datasets and 2nd driving gear of gearbox respectively. © 2021 Elsevier LtdItem Fault diagnosis of antifriction bearing in internal combustion engine gearbox using data mining techniques(Springer, 2022) Ravikumar, K.N.; Aralikatti, S.S.; Kumar, H.; Kumar, G.N.; Gangadharan, K.V.Ball bearing failure are most common failure in rotating machinery, which can be catastrophic. Hence obtaining early failure warning along with precise fault detection technique is at most important. Early detection and timely intervention are the key in condition monitoring for long term endurance of machine components. The early research has used signal processing and spectral analysis extensively for fault detection however data mining with machine learning is most effective in fault diagnosis, the same is presented in this paper. The vibration signals are acquired for an output shaft antifriction bearing in a two-wheeler gearbox operated at various loading conditions with healthy and fault conditions. Data mining is employed for these acquired signals. Statistical, discrete wavelet and empirical mode decomposition are employed for feature extraction process and J48 decision tree for feature selection. Classification is carried out using K*, Random forest and support vector machine algorithm. The classifiers are trained and tested using tenfold cross validation method to diagnose the bearing fault. A comparative study of feature extraction and classifiers are done to evaluate the classification accuracy. The results obtained from K* classifier with wavelet feature yielded better accuracy than rest other classifiers with classification accuracy 92.5% for bearing fault diagnosis. © 2021, The Society for Reliability Engineering, Quality and Operations Management (SREQOM), India and The Division of Operation and Maintenance, Lulea University of Technology, Sweden.