Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Kumar, G.N.Subject: search.filters.subject.Emission

Search Results

Now showing 1 - 10 of 15
  • No Thumbnail Available
    Item
    An Experimental Study on Combustion and Emission Analysis of Four Cylinder 4-Stroke Gasoline Engine Using Pure Hydrogen and LPG at Idle Condition
    (Elsevier Ltd, 2016) Chitragar, P.R.; Shivaprasad, K.V.; Nayak, V.; Bedar, P.; Kumar, G.N.
    Fluctuation in oil prices and stricter exhaust emission norms were the main reasons wakening every researcher to search for suitable and feasible alternative fuels for automotive use. Among the available option gaseous fuels find their best position because of their compatible physical-chemical properties and ecofriendly nature than present fossil fuels. Hydrogen's combustion properties like high energy content, high heating value, wide range of flammability and low ignition energy with almost least toxic emissions are favorable to use in an IC engine as an alternative fuel. Liquid petroleum gas (LPG) has lower carbon content, higher calorific value, octane number and flame propagation speed will improve the emission results compared to gasoline fuel. This paper describes an experimental results carried out to evaluate the combustion and emission performance of a Maruti Suzuki make, spark ignited four cylinders, four stroke engines at idle condition by using pure hydrogen, LPG and gasoline. The engine was adjoined with Electronic Control Unit (ECU) assisting hydrogen and LPG injector system keeping gasoline line unchanged. Tests were carried out by using compressed hydrogen gas regulated by two stage pressure reduction from cylinder to atmospheric value and by using vaporizer pressure for LPG. For comparison engine was run first by gasoline and then by pure hydrogen and LPG. Study revealed that there was increment of 13% cylinder pressure for pure hydrogen and decrement of 4.5% cylinder pressure for LPG when compared to gasoline. The burn duration for pure hydrogen, LPG and gasoline were found to be increasing respectively which infers that hydrogen has very short combustion duration and gasoline higher. It was observed that toxic emissions like Carbon monoxide (CO), Hydrocarbons (HC) and Oxides of Nitrogen (NOx) were improved for pure hydrogen than LPG and gasoline. © 2016 The Authors.
  • No Thumbnail Available
    Item
    Comparison and Feasibility Study of Hexanol/Diesel/Pongamia Biodiesel Blend on Engine Characteristics of a Common Rail Direct Injection Diesel Engine
    (SAE International, 2024) Santhosh, S.; Shahapur, S.; Kumar, G.N.; Ravikumar, K.N.; Raghavendra Reddy, N.V.
    In this work, the impact of hexanol/diesel/biodiesel blend on engine characteristics of a common rail direct injection (CRDI) diesel engine was studied. Biodiesel is more viscous in nature and higher cetane count, hexanol has a lower viscosity and cetane count. The drawbacks of both biodiesel and hexanol can be overcome by blending both hexanol and biodiesel with diesel fuel in the right proportion. Tests were carried out using a 4-stroke CRDI engine with two cylinders. Biodiesel and 1-hexanol were blended in a ratio of 10% each by volume with diesel and compared with B10D90 and B20D80 blends. It was noted that the addition of hexanol enhances the combustion characteristics of the engine. At 20% load H10B10D80 showed71.34 bar which is highest compared to other fuels in the test. The blends had a positive effect on emissions, there was drastic reduction in NOx was noticed, also HC and CO emission was lower than diesel emissions. The lowest CO, and HC emission is obtained for H10B10D80, which is 66%, 92% lower at 60% load compared to baseline readings. However, the blend had a slight negative effect on performance in contrast to diesel. The higher latent heat of vaporization of hexanol led to low temperature combustion contributing to the lowest NOx emissions. The combination of both hexanol and Pongamia biodiesel with diesel showed an effective reduction in greenhouse gases. Which will also reduce the dependency on fossil fuels. The lower carbon content of 1-hexanol contributes towards carbon neutrality. Overall, the hexanol and biodiesel are sustainable alternatives to the diesel fuel. © 2024 SAE International. All rights reserved.
  • No Thumbnail Available
    Item
    Hydrogen addition on combustion and emission characteristics of high speed spark ignition engine- An experimental study
    (Taylor's University # 1, Jalan Taylor's Subang Jaya, Selangor Darul Ehsan 47500, 2016) Shivaprasad, K.V.; Chitragar, P.R.; Kumar, G.N.
    The present article aims at characterizing the combustion and emission parameters of a single cylinder high speed SI engine operating with different concentrations of hydrogen with gasoline fuel. The conventional carburetted SI engine was modified into an electronically controllable engine, wherein ECU was used to control the injection timings and durations of gasoline. The engine was maintained at a constant speed of 3000 rpm and wide open throttle position. The experimental results demonstrated that heat release rate and cylinder pressure were increased with the addition of hydrogen until 20%. The CO and HC emissions were reduced considerably whereas NOx emission was increased with the addition of hydrogen in comparison with pure gasoline engine operation. © School of Engineering, Taylor’s University.
  • No Thumbnail Available
    Item
    Performance and emission analysis of a single cylinder CI engine using Simarouba glauca biodiesel
    (Springer Heidelberg, 2017) Bedar, P.; Chitragar, P.R.; Shivaprasad, K.V.; Kumar, G.N.
    It is well known fact that diesel engines are commonly used for transportation and power generation due to their high efficiency, low fuel consumption and durability. On contrary these engines churn out harmful and hazardous emissions like particulate matter (PM) and nitrogen oxides (NOx). Recently Bio-origin renewable fuels have taken center stage of discussion because of their ability to replace depleting fossil fuels and capacity to reduce hazardous engine exhausts emissions when used in diesel engines. In the present experimental study Simarouba glauca biodiesel is used in a naturally aspirated four stroke single cylinder air cooled direct injection kirloskar DA10 engine. The main objective is to investigate the effect of biodiesel and exhaust gas recirculation (EGR) on the performance and emission characteristics of a CI engine at 180 bar fuel injection pressure (FIP) with standard injection timing. B20, B40 biodiesel blends with 10, 15 and 20% EGR ratios were used for the study to investigate brake thermal efficiency (BTE), carbon monoxide (CO), unburned hydrocarbons (UBHC), NOx, and smoke opacity. Reduction in CO, HC and smoke opacity is noticed with simarouba biodiesel fuel while increasing NOx compared to diesel. Application of EGR along with biodiesel resulted in simultaneous reduction of nitrogen oxides and smoke without affecting engine performance. It was found from experiment that B20 blend at 15% EGR shown superior performance characteristics compared to other conditions. © Springer India 2017.
  • No Thumbnail Available
    Item
    Effect of hydrogen addition on combustion and emissions performance of a high speed spark ignited engine at idle condition
    (Serbian Society of Heat Transfer Engineers, 2018) Shivaprasad, K.V.; Chitragar, P.R.; Kumar, G.N.
    The fuel depletion and environmental pollution have pushed studies on improving the combustion and emission characteristics of internal combustion engines with several alternative fuels. Expert studies proved that hydrogen is one of the prominent energy source which has exceptional combustion qualities that can be used for improving combustion and emissions performance of gasoline-fueled spark ignition engines. This paper introduced an experiment conducted on a single cylinder high speed gasoline engine equipped with a hydrogen injection system to discover the combustion and emissions characteristics with various hydrogen gasoline blends at idle condition. For this purpose, the conventional carburetted high speed spark ignition engine was modified into an electronically controllable engine with help of electronic control unit which dedicatedly used to control the ignition timings and injection duration of gasoline fuel. © 2018 Society of Thermal Engineers of Serbia.
  • No Thumbnail Available
    Item
    Experimental studies on the impact of part-cooled high-pressure loop EGR on the combustion and emission characteristics of liquefied petroleum gas
    (Springer Science and Business Media B.V., 2020) Oommen, L.P.; Kumar, G.N.
    Liquefied petroleum gas is preferred and adopted in automotive engines because of its efficient burning and cleaner emission characteristics. Since LPG contains less carbon molecules and higher carbon to hydrogen ratios than gasoline or diesel, it has a much higher emission reduction potential both in the cases of regulated and non-regulated emissions. A major disadvantage of deploying LPG widely is the amount of NOx generation owing to the higher temperatures developed in the combustion chamber. In this study, part-cooled EGR is applied in varying rates (12%, 18%, 24%) in order to analyze the effects produced in the performance and emission characteristics of a multicylinder MPFI engine fuelled by 100% LPG at four different loading conditions and four different operating speeds. It can be observed that the application of an optimum rate of cooled EGR reduces the NOx emissions drastically even though at the expense of hydrocarbon emissions. The fuel consumption of the test engine is reduced up to 12.28% with the application of 18% percentage of part-cooled EGR. It can be inferred from the experimental studies that 18% part-cooled EGR is the optimum flow rate of recirculation which is most effective during the part load operation of the engine (50–75%) and at higher engine speeds. However, the emission of oxides of nitrogen reduced by 7.8% at 24% recirculation. The statistical analysis of combustion shows a reduction in combustion stability with increased flow of recirculation. © 2020, Akadémiai Kiadó, Budapest, Hungary.
  • No Thumbnail Available
    Item
    Combustion, performance and emission analysis of preheated KOME biodiesel as an alternate fuel for a diesel engine
    (Springer Science and Business Media B.V., 2020) Kodate, S.V.; Yadav, A.; Kumar, G.N.
    In the present work, karanja oil methyl ester (KOME) biodiesel is used in a compression ignition engine to find an alternative to diesel. The use of biodiesel in a CI engine leads to poor performance and high brake specific fuel consumption due to the higher viscosity and lower calorific value of biodiesel. This problem can be reduced by increasing the injection temperature of biodiesel or its blends to a certain temperature. In this study, working fuel is tested at preheating temperatures of 95 °C for various loading conditions (0, 25, 50, 75 and 100%). Effect of different KOME biodiesel–diesel blends (B0, B30, B50 and B100) on engine performance, combustion and emissions is studied at different loads. At higher temperature, the viscosity of the fuel decreases which leads to better combustion, improves the atomization as well as vaporization of fuel in a diesel engine, resulting in higher engine performance and lower emissions of CO and HC, with slight increment in NOX and CO2 emission compared to unheated neat diesel and biodiesel blends. The result shows that for 100% biodiesel (B100) at full load, BTE is improved by 9.1% compared to unheated case. Preheating of B100 fuel upto 95 °C at full load decreases the BSFC, CO and HC emission by 6.5%, 8.1% and 10.6%, respectively, compared to unheated case. © 2020, Akadémiai Kiadó, Budapest, Hungary.
  • No Thumbnail Available
    Item
    Effect of hydrogen enrichment on performance, combustion, and emission of a methanol fueled SI engine
    (Elsevier Ltd, 2021) Nuthan Prasad, B.S.; Pandey, J.K.; Kumar, G.N.
    The study of potentially high rated alternative fuel (Methanol) for the IC engines is an exciting topic in the recent research advancement. However, the study of combination of methanol and hydrogen is considered to address both economic and environmental needs. Hydrogen with best combustion characteristics will compensate for the drawbacks of methanol as a fuel. In the present investigation hydrogen enrichment to methanol has shown a significant enhancement in performance and combustion; the overall emission has reduced substantially. The experiments for a different set of trials, including hydrogen enrichment ranging between 5% and 20% with 2.5% increment, the engine is operated with wide-open throttle (WOT) condition for different speeds. The increase in enrichment of hydrogen has shown a rise in BTE, BP, and a reduced BSEC value. The percentage increase in BTE is between 20 and 30%, and an increase in hydrogen beyond 12.5% would affect the volumetric efficiency, and thus performance declines after that. The exhaust emissions have a huge impact on hydrogen enrichment; CO, HC, and CO2 emission are reduced by 30–40%; however, an increase in cylinder temperature due to rapid combustion slightly increases the NOx emission. Thus hydrogen enriched methanol operating at higher compression ratio can improve the overall engine characteristics significantly. © 2021 Hydrogen Energy Publications LLC
  • No Thumbnail Available
    Item
    Investigation of preheated Dhupa seed oil biodiesel as an alternative fuel on the performance, emission and combustion in a CI engine
    (Elsevier Ltd, 2021) Kodate, S.V.; Satyanarayana Raju, P.; Yadav, A.K.; Kumar, G.N.
    The present study investigates the suitability of preheated Vateria indica methyl ester (VIME) as an alternative fuel for a diesel engine. VIME is a renewable, non-toxic and sustainable alternative biodiesel obtained from Dhupa fat by transesterification. This study aims to evaluate the combustion, performance, and emission characteristics of four different blends such as B0 (0% VIME and 100% mineral diesel), B30, B50 and B100 at elevated fuel inlet temperatures ranging from 35 °C to 95 °C. The tests are carried out in a single cylinder diesel engine at optimum loading condition and fixed speed. Results are obtained in terms of brake thermal efficiency (BTE), brake specific fuel consumption (BSFC), in-cylinder pressure, heat release rate and exhaust emissions (CO, HC, NOX, CO2 and soot). It is observed that the preheating of blends decreases the viscosity which enhances fuel spray characteristics, leading to higher engine performance, lower CO and HC emissions with a slight increase in NOX and CO2 emissions. BTE and peak in-cylinder pressure for B100 at 95 °C and 75% load are increased by 7.44%, 2.97% respectively compared to unheated B100 biodiesel. BSFC, CO, HC emissions at 75% load for B100 at 95 °C are reduced by 26.73%, 28.08%, 42.7% respectively compared to unheated B100. © 2021 Elsevier Ltd
  • No Thumbnail Available
    Item
    Effect of parallel LPG fuelling in a methanol fuelled SI engine under variable compression ratio
    (Elsevier Ltd, 2022) Dinesh, M.H.; Pandey, J.K.; Kumar, G.N.
    In the present experimental study, five LPG fractions from 25% to 45% based on total energy are tested in a methanol fuelled SI engine at compression ratios (CR) varying from 12 to 15. Results are affirmative towards methanol/LPG dual fuel. The brake power, brake thermal efficiency, and volumetric efficiency are found to increase by 51%, 21.2%, and 13% respectively by changing from 25% LPG fraction at CR12 to 45% LPG fraction at CR15. The flame development period is found to decrease with CR and LPG, while the flame propagation period and total combustion duration are found to decrease with CR but increase with LPG. The maximum cylinder pressure and net heat release rate are found to increase by 101% and 27.8% respectively and advanced. CO emissions are found to decrease with CR while increase with LPG fraction. HC is found to decrease with LPG as well as CR. CO2 emissions are found to increase continuously with increasing LPG fractions and CR. The NOx emissions are also found to increase explicitly with LPG and CR, a net 209% increase in it is found 25% LPG at CR 12–45% LPG at CR15. © 2021 Elsevier Ltd