Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Optimisation of recycled concrete aggregates for cement-treated bases by response surface method(Taylor and Francis Ltd., 2023) Chiranjeevi, K.; Kumar, D.H.; Srinivasa, A.S.; Ravi Shankar, A.U.Sustainability is a primary concern that needs to be addressed since infrastructure development requires significant natural resources. Using Recycled Concrete Aggregates (RCA) for road construction has numerous benefits in saving natural resources and the environment. In the present investigation, the demolition waste is being used for road construction, partially/fully replacing natural aggregates. The Cement Treated Recycled Concrete Aggregate (CTRCA) specimens were prepared at 3%, 5%, and 7% cement with various blends of RCA and Natural Coarse Aggregates (NCA) ranging from 0 to 100%. The strength characteristics in terms of Unconfined Compressive Strength (UCS), Flexural Strength (FS), Elastic Modulus, Indirect Tensile Strength (ITS) and durability tests were conducted on cured samples. Microstructural analysis using Scanning Electronic Microscope (SEM) revealed that the pores and cracks in the old mortar have a detrimental influence on the mechanical properties of CTRCA mixes. However, Energy Dispersive Spectroscopy (EDS) and durability tests have shown positive results. The Response Surface Method (RSM) was utilised to optimise the RCA and cement content in CTRCA mixes. The research resulted in the maximum possible RCA of up to 70% with a cement content of 5.8%, which met the Indian Road Congress (IRC) specifications for Cement Treated Bases (CTB). © 2023 Informa UK Limited, trading as Taylor & Francis Group.Item Effect of aggregate gradation and bitumen type on mechanical properties of semi-flexible asphalt mixtures(Elsevier Ltd, 2023) Kumar, D.H.; Chinnabhandar, R.K.; Chiranjeevi, K.; Ravi Shankar, A.U.R.Semi-Flexible Asphalt (SFA) mixture is a wearing course in which Open-Graded Asphalt (OGA) mixes having air voids of 20–35% are grouted with cement mortar. The grout consists of cement, sand, superplasticizer, and water. In the present work, an effort was made to assess the effect of the Sand-Cement (S/C) ratio in determining the optimal grout proportions. Taguchi technique combined with Grey Relational Analysis was used to obtain the optimal grout proportion. The optimum grout was found to be the mixture prepared with an S/C ratio of 0.6, a water-to-cement (W/C) ratio of 0.40, and a polycarboxylic ether-based superplasticizer (SP) content of 0.75% by weight of cement. The SP content was the most influencing factor, while the S/C ratio was the second most influencing factor. To investigate the effect of aggregate gradation and bitumen type on the mechanical properties of SFA mixtures, a new aggregate gradation with neat and modified bitumen was used to prepare OGA mixtures and later grouted with optimal grout proportion. The Marshall Stability, compressive strength, Indirect Tensile Strength, Cantabro loss, fatigue resistance, moisture and Oil spillage resistance tests were conducted. The results showed that the SFA mixtures prepared with polymer-modified bitumen and the new aggregate gradation have better mechanical properties, implying the significance of bitumen type and aggregate gradation. © 2023Item Utilization of recycled concrete aggregates for pavement base courses – A detailed laboratory study(Elsevier Ltd, 2024) Chiranjeevi, K.; R G, Y.; Kumar, D.H.; Mulangi, R.H.; Ravi Shankar, A.U.R.Pavement construction and maintenance have become prevalent globally due to increasing traffic volumes and higher vehicular axle weights, driven by population growth and technological advancements. However, the extensive reliance on natural resources raises concerns about their long-term availability and sustainability. An emerging trend in construction involves the application of alternative materials, such as demolished waste and industrial by-products, as substitutes for natural materials like aggregates. This study examined strength properties, including unconfined compressive strength (UCS), flexural strength, elastic modulus, indirect tensile strength (ITS) and the performance aspects of durability, shrinkage, and fatigue. Cement stabilized recycled concrete aggregate (CSRCA) mixes were prepared by varying the percentage of natural coarse aggregate (NCA) and recycled concrete aggregate (RCA) from 0% to 100% and cement content from 3% to 7%. The experimental findings demonstrated that the cement content had a more significant impact on the strength and performance characteristics of CSRCA mixes than RCA content. The mixes with RCA replacement up to 50% and a cement content of 5% satisfy the strength and durability criteria recommended by IRC 37. A higher proportion of RCA was found to have a detrimental effect on mechanical properties and fatigue characteristics. It was found that the CSRCA mixes with 50% RCA replacement to NCA can be used as a base layer instead of a conventional cement-treated base (CTB) for flexible pavement. © 2023 Elsevier LtdItem Optimization and Characterization of Ferrochrome and Recycled Concrete Aggregate Mixes for Pavement Base Layers(American Society of Civil Engineers (ASCE), 2025) Chiranjeevi, K.; Kumar, D.H.; Yatish, R.G.; Mulangi, R.H.; Ravi Shankar, A.U.Utilizing alternate aggregates is crucial for conserving resources, promoting sustainability, and managing waste effectively. The focus of the current study was the utilization of ferrochrome aggregate (FCA) and recycled concrete aggregate (RCA) in cement-treated base layers with the objective of entirely replacing natural coarse aggregate (NCA). The study meticulously prepared cement treated recycled and ferrochrome aggregate (CTRFA) specimens with 3%, 5%, and 7% cement content. These specimens incorporated varying blends of RCA and FCA, ranging from 0% to 100%. Response surface method (RSM) was used to optimize the mixes by considering strength and durability criteria for cement treated bases (CTB). Microstructural characterization was aimed to explore aggregate surface roughness, mortar hardness, mineral phases, cracks, and elements within the matrix. The outcomes of optimization revealed that the optimal mixture, meeting the specifications of the Indian Road Congress, could be achieved by substituting 61% RCA and 39% FCA with 4.8% cement content. © 2024 American Society of Civil Engineers.