Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Studies on normal strength concrete cubes subjected to elevated temperatures(2010) Yaragal, S.C.; Babu Narayan, K.S.; Venkataramana, K.; Kulkarni, K.S.; Gowda, H.C.C.; Reddy, G.R.; Sharma, A.Concrete in structures is likely to be exposed to high temperatures during fire. The probability of its exposure to elevated temperatures is high due to natural hazards, accidents and sabotages. Therefore, the performance of concrete during and after exposure to elevated temperature is a subject of great importance and interest to the designer. Popular normal strength grades of concrete produced by Ready Mix Concrete (RMC) India, Mangalore have been used in production of test specimens (150 mm cubes), cured and tested by destructive method for gathering data on strength characteristics. Later, these test samples were subjected to elevated temperatures ranging from 100 C to 800 C, in steps of 100 C with a retention period of 2 hours. After exposure, weight losses and the residual compressive strength retention characteristics are studied. Test results indicated that weight and strength significantly reduces with an increase in temperature. Residual compressive strength prediction equations are proposed for normal strength concretes subjected to elevated temperatures.Item Assessment of thermally deteriorated concrete by drilling resistance test and sound level(Maik Nauka Publishing / Springer SBM compmg@maik.ru, 2017) Kulkarni, K.S.; Yaragal, S.C.; Babu Narayan, K.S.; Vardhan, H.Concrete being the most versatile and widely used construction material finds application in varied range of structures. Many of these like chimneys, furnaces and reactors have to sustain high temperatures and perhaps all structures have to perform at elevated temperatures in the event of fire accidents. Concrete at elevated temperatures undergoes changes in its physical structure and chemical composition and loses its strength characteristics. Need for quick assessment of fire damaged concrete for strength characteristics, has motivated this work, which explores the potential of drilling resistance test on concrete as a Non Destructive Testing (NDT) tool. Drilling times, penetration depths and sound level measurement while drilling have been recorded and analysed to provide monograms that are handy as reckoners in failure forensics. © 2017, Pleiades Publishing, Ltd.Item Decision Tree Model for Predicting Exposure Temperature and Retention Period-Dependent Behavior of Blended Concrete(Springer Science and Business Media Deutschland GmbH, 2023) Kulkarni, K.S.; Babu Narayan, K.S.; Yaragal, S.C.The major objective of the study is to estimate the behavior of blended concrete at various sustained exposure temperatures and retention times. The study examines the properties of four different types of concrete mixes, including unblended and blended mixes with fly ash and ground granulated blast furnace slag used to partially replace cement at exposure temperatures between 100 °C and 800 °C for varying exposure times of 1, 2, and 3 h. Concrete quality has been evaluated using measurements of density, porosity, and ultrasonic pulse velocity. Residual compressive and splitting tensile strengths have also been determined. The experimental study indicates that blended concrete has better fire-endurance characteristics than unblended concrete. The exposure temperature and retention time dependent behavior of unblended and blended concrete is predicted using classification and regression decision tree techniques. © 2023, The Author(s), under exclusive licence to Shiraz University.