Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Airborne Kite Tether Force Estimation and Experimental Validation Using Analytical and Machine Learning Models for Coastal Regions(MDPI, 2022) Castelino, R.V.; Kashyap, Y.; Kosmopoulos, P.Wind power can significantly contribute to the transition from fossil fuels to renewable energies. Airborne Wind Energy (AWE) technology is one of the approaches to tapping the power of high-altitude wind. The main purpose of a ground-based kite power system is to estimate the tether force for autonomous operations. The tether force of a particular kite depends on the wind velocity and the kite’s orientation to the wind vector in the figure-eight trajectory. In this paper, we present an experimental measurement of the pulling force of an Airush Lithium 12 (Formula presented.) kite with a constant tether length of 24 m in a coastal region. We obtain the position and orientation data of the kite from the sensors mounted on the kite. The flight dynamics of the kite are studied using multiple field tests under steady and turbulent wind conditions. We propose a physical model (PM) using Artificial Neural Network (ANN) and Long Short-Term Memory (LSTM) deep neural network algorithms to estimate the tether force in the experimental validation. The performance study using the root mean square error (RMSE) method shows that the LSTM model performs better, with overall error values of 126 N and 168 N under steady and turbulent wind conditions. © 2022 by the authors.Item Laboratory-Scale Airborne Wind Energy Conversion Emulator Using OPAL-RT Real-Time Simulator(Multidisciplinary Digital Publishing Institute (MDPI), 2023) Kumar, P.; Kashyap, Y.; Castelino, R.V.; Karthikeyan, A.; Sharma K, M.; Karmakar, D.; Kosmopoulos, P.Airborne wind energy systems (AWES) are more efficient than traditional wind turbines because they can capture higher wind speeds at higher altitudes using connected kite generators. Securing a real wind turbine or a site with favorable wind conditions is not always an assured opportunity for conducting research. Hence, the Research and Development of the Laboratory Scale Airborne Wind Energy Conversion System (LAWECS) require a better understanding of airborne wind turbine dynamics and emulation. Therefore, an airborne wind turbine emulation system was designed, implemented, simulated, and experimentally tested with ground data for the real time simulation. The speed and torque of a permanent magnet synchronous motor (PMSM) connected to a kite are regulated to maximize wind energy harvesting. A field-oriented control technique is then used to control the PMSM’s torque, while a three-phase power inverter is utilized to drive the PMSM with PI controllers in a closed loop. The proposed framework was tested, and the emulated airborne wind energy conversion system results were proven experimentally for different wind speeds and generator loads. Further, the LAWECS emulator simulated a 2 kW, 20 kW, and 60 kW designed with a projected kite area of 5, 25, and 70 square meters, respectively. This system was simulated using the Matlab/Simulink software and tested with the experimental data. Furthermore, the evaluation of the proposed framework is validated using a real-time hardware-in-the-loop environment, which uses the FPGA-based OPAL-RT Simulator. © 2023 by the authors.