Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Standalone Single Stage PV-Fed Reduced Switch Inverter Based PMSM for Water Pumping Application(Institute of Electrical and Electronics Engineers Inc., 2020) Koothu Kesavan, K.K.; Karthikeyan, A.; Varsha, S.; Venkatesa Perumal, B.V.; Mishra, S.This article proposes a standalone single stage photovoltaic (PV) fed reduced switch inverter (RSI) based permanent magnet synchronous motor (PMSM) drive for water pumping application. The proposed system aims at reducing the switching losses and overall cost by using reduced switch inverter. The proposed system comprises a PMSM drive, fed by PV source through an inverter employing reduced number of switches. The inverter uses only four switches whereas the conventional voltage source inverter utilizes six switches. Field oriented control scheme is employed to control the PMSM drive. Perturb and observe maximum power point tracking technique is used to generate a speed reference to PMSM drive. The proposed system is simulated using MATLAB/Simulink platform, and it is also experimentally verified with field programmable gate array (FPGA) controller based 400 W laboratory prototype PMSM drive. The simulation and experimental results demonstrate the efficacy of the proposed system. © 1972-2012 IEEE.Item Single-stage PV-powered boost inverter-fed permanent-magnet synchronous motor-driven water-pumping system(Oxford University Press, 2022) Koothu Kesavan, K.K.; Sunkara, V.; Karthikeyan, A.In this paper, a photovoltaic (PV) fed boost inverter-based permanent-magnet synchronous motor (PMSM)-driven water-pumping system for stand-alone applications is proposed. The proposed system comprises PV panel, six switches, three inductors (L), three capacitors (C) and a water pump. In this work, the boost inverter is designed with a gain of two and thereby the direct current input required to run the motor is considerably reduced. Hence, the size of the system is reduced. The voltage gain factor depends upon the placement of the L and C components and their values. The speed reference is generated using a perturb and observe maximum power point tracking algorithm. Vector control is employed to control a boost inverter-fed PMSM drive. The proposed system is simulated using a MATLAB®/Simulink® environment and experimental validation is performed on a PMSM laboratory prototype using a field programmable gate array controller. The simulation and experimental results demonstrate the effectiveness of the proposed system. © 2022 The Author(s). Published by Oxford University Press on behalf of National Institute of Clean-and-Low-Carbon Energy.Item A Novel Algorithm Based on Voltage and Current Perturbation to Track Global Peak Under Partial Shading Conditions(Institute of Electrical and Electronics Engineers Inc., 2022) P, P.; Vignesh Kumar, V.; Koothu Kesavan, K.K.; Balasubramanian, B.Under partial shading conditions, photovoltaic (PV) systems exhibit multiple peaks in their power-voltage (P-V) characteristics. It is essential to extract maximum energy from the PV system. The global maximum power point tracking (GMPPT) algorithms presented in the literature, track the global peak using different methods. It is imperative to have minimal convergence time for GMPPT process. This paper proposes a novel algorithm to track the global peak using voltage and current perturbation. The new GMPPT algorithm operates in a current perturbation or voltage perturbation mode, based on the value of a control variable. In either mode, the proposed technique generates reference current or reference voltage, for navigating the operating point to GMPP location. The proposed algorithm is compared with two GMPPT algorithms, namely, modified maximum power trapezium (M-MPT) and high-performance GMPPT algorithms. The simulation studies are performed in MATLAB and is validated using a laboratory prototype, with dSPACE 1202 MicroLabBox controller for implementing GMPPT methods. Simulation and experimental results show that the new technique exhibits superior performance in terms of tracking time. Also, the energy efficiency is improved by 40% while using the proposed GMPPT algorithm for the irradiance profiles considered in this paper compared to the other two techniques. © 1986-2012 IEEE.