Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Developing the viscoelastic model and model-based fuzzy controller for the MRE isolator for the wide frequency range vibration isolation(Springer Science and Business Media Deutschland GmbH, 2022) Kiran, K.; Poojary, U.R.; Gangadharan, K.V.The ability to mitigate the vibrations by a magnetorheological elastomer (MRE) isolator varies with the amplitude of the excitation and the magnetic field. To implement semi-active vibration control, a mathematical model representing the dynamic response over a wide frequency range is crucial. In the present study, an attempt was made to develop a mathematical model for the designed MRE isolator over a wide frequency range under different operating conditions. A model-based fuzzy controller was developed to implement semi-active control attributes over a broadband frequency. The methodology entails that the MRE isolator operating in shear mode was designed. The performance of the isolator was evaluated over a frequency range of 15–80 Hz with varying input currents and excitation amplitudes. The transmissibility response of MRE isolator was mathematically represented using viscoelastic constitutive relations. The isolator system was represented in state-space form, and its parameters were determined by minimizing the mean square error between experimental and model responses. A polynomial function was used to generalize variations in viscoelastic model parameters with respect to the input current. Based on the controller stopping frequency, a relationship was established between the current input to the MRE isolator and the excitation amplitude. Using the mathematical equations, a model-based fuzzy controller was developed and tested in simulation and real-time conditions. The results show that the controller effectively isolates the vibration amplitude at various excitation amplitudes and frequencies. © 2022, The Author(s).Item An experimental investigation on the matrix dependent rheological properties of MRE(SAGE Publications Ltd, 2024) Poojary, U.R.; Kiran, K.; Hegde, S.; Gangadharan, K.V.The rheological properties of magnetorheological elastomers are influenced by magnetically sensitive fillers and the elastomer matrix. The ability to respond to an external magnetic field is imparted by the fillers, while the load-bearing capability is determined by the matrix type. In this paper, the effect of matrix material on the properties of magnetorhological elastomer is explored experimentally. Carbonyl iron particle content is varied by 0%, 15% and 25% by volume to produce magnetorheological elastomer samples using natural rubber, silicone rubber and nitrile butadiene rubber matrices. Forced transmissibility test approach was employed to evaluate the field induced variations in the dynamic stiffness and loss factor of magnetorheological elastomers. The dynamic stiffness of nitrile butadiene rubber is the highest, while that of silicone rubber is the lowest. Addition of carbonyl iron particles significantly improves stiffness, although these gains depend on the properties of unfilled matrix. The addition of 25% by volume of carbonyl iron particle increased the dynamic stiffness of a silicone rubber matrix based magnetorheological elastomer by 67.78%, while the similar change in magnetorheological elastomer with nitrile butadiene rubber matrix was 38.58%. The field dependent response of magnetorheological elastomers is governed by the matrix and ferromagnetic filler concentration. These qualities are higher in magnetorheological elastomer with a low initial dynamic stiffness matrix and lower in magnetorheological elastomers with a stiffer matrix. © The Author(s) 2023.