Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Khalifa, M.Subject: search.filters.subject.Nanocomposites

Search Results

Now showing 1 - 8 of 8
  • No Thumbnail Available
    Item
    Probing the synergism of halloysite nanotubes and electrospinning on crystallinity, polymorphism and piezoelectric performance of poly(vinylidene fluoride)
    (Royal Society of Chemistry, 2016) Khalifa, M.; Mahendran, A.; Anandhan, S.
    Poly(vinylidene fluoride) (PVDF) nanofibers have tremendous potential in nano-sensing and energy scavenging applications. In this study, uniaxially aligned nanofibers were developed from halloysite nanotubes (HNT)/PVDF nanocomposite using electrospinning technique. Incorporation of HNT into PVDF not only reduced the diameter of the electrospun nanofibers, but, also improved their morphology. Fourier transform infrared spectroscopy, wide angle X-ray diffraction and differential scanning calorimetry techniques were used to characterize the crystallinity, polymorphism and polymer-filler interaction in the nanocomposite nanofibers. A force sensor was indigenously designed to study the piezoelectric responses of the nanocomposite nanofibers. At 10 wt% of HNT loading, the sensor produced the highest voltage output, which can be ascribed to its highest ?-phase content. Incorporation of HNT and use of electrospinning synergistically enhanced the ?-phase content and hence the piezoelectric behavior of PVDF. Hence, these nanofibers could be promising and prominent materials in sensor and actuator applications. © The Royal Society of Chemistry.
  • No Thumbnail Available
    Item
    Synergism of graphitic-carbon nitride and electrospinning on the physico-chemical characteristics and piezoelectric properties of flexible poly(vinylidene fluoride) based nanogenerator
    (Springer Netherlands rbk@louisiana.edu, 2019) Khalifa, M.; Mahendran, A.; Anandhan, S.
    Herein, we investigated the piezoelectric performance of electrospun poly(vinylidene fluoride)/graphitic carbon nitride (PVDF/g-C 3 N 4 ) nanocomposite fibers (PGN-X). Addition of g-C 3 N 4 nanosheets improved the spinnability of nanofibers and augmented the ?-phase content of PVDF. The synthesized PGN non-woven mats were flexible and easily deformable without disrupting the continuity of fibers. Upon the addition of g-C 3 N 4 , tensile strength and thermal stability of nanocomposite fibers improved significantly. A maximum voltage output of ~7.5 V was generated for PGN nanogenerator which is ~8 times more than that of PVDF nanogenerator. Also, the PGN-X nanogenerator generated current output of 0.23 ?A and a power density of 0.22 ?W/cm ?2 . Improved physico-chemical characteristics and piezoelectric performance of PGN nanogeneratoris promising and makes it suitable for portable electronic and wearable devices. © 2019, The Polymer Society, Taipei.
  • No Thumbnail Available
    Item
    Durable, efficient, and flexible piezoelectric nanogenerator from electrospun PANi/HNT/PVDF blend nanocomposite
    (John Wiley and Sons Inc. cs-journals@wiley.com, 2019) Khalifa, M.; Mahendran, A.; Anandhan, S.
    Currently, there is considerable research focus on portable, lightweight, shock-resistant, and inexpensive wearable devices that are ideally powered by harvesting abundant mechanical or vibration energy, making battery or related wiring superfluous. In this study, piezoelectric nanogenerator was electrospun from PANi (polyaniline)/HNT (halloysite nanotube)/PVDF (poly[vinylidene fluoride]) blend nanocomposite. Polymorphism, crystallinity and morphology of the nanogenerator were explored in detail. HNT and PANi acted as a nucleating agent and conductive filler, respectively in PVDF; their synergism helps improve the piezoelectric performance of PVDF. The piezoelectric performance of the nanogenerator patch was studied under various external mechanical stresses, such as pressure, tapping, and impact. A maximum voltage output of approximately 7.2 V was generated by the nanogenerator under impact. The nanogenerator patch attached to human arm exhibited not only excellent piezoelectric response during arm movements, but, also proved to be flexible, highly sensitive and durable. This nanogenerator could possibly be used in wearable piezoelectric energy conversion application for self-powered devices. POLYM. COMPOS., 40:1663–1675, 2019. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics Engineers
  • No Thumbnail Available
    Item
    PVDF/halloysite nanocomposite-based non-wovens as gel polymer electrolyte for high safety lithium ion battery
    (John Wiley and Sons Inc. cs-journals@wiley.com, 2019) Khalifa, M.; Janakiraman, S.; Ghosh, S.; Adyam, A.; Anandhan, S.
    Gel polymer electrolyte (GPE) based on electrospun poly(vinylidene fluoride) (PVDF)/halloysite nanotube (HNT) nanocomposite non-wovens was synthesized and its suitability as a separator in lithium-ion battery (LIB) was explored. In this study, HNT played a key role in reducing the average diameter of the electrospun fibers and uplifted the porosity of the non-wovens thereby improving their electrolyte uptake. Due to a reduction in crystallinity and increased % porosity of the PVDF/HNT non-wovens, the ionic conductivity (1.77 mScm?1) and ionic transport across the separator were improved. Moreover, this GPE separator exhibited high tensile and puncture strength with negligible thermal shrinkage and a higher melting temperature compared with a commercially available separator, which is vital from the safety perspective. The cycling performance of Li/GPE/LiCoO2 cell was evaluated and it exhibited a high capacity of 138.01 mAhg?1 with 97% coulombic efficiency for the initial cycle. The cell was stable and retained its high performance with little loss in capacity even after repeated charge–discharge cycles. Such a combination of high ionic conductivity, tensile strength with low thermal shrinkage is seen to be very rare in polymer-based separators. It is noteworthy that this novel GPE outperformed the commercial separator also in the cycle performance. POLYM. COMPOS., 40:2320–2334, 2019. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics Engineers
  • No Thumbnail Available
    Item
    PVDF Nanofibers with Embedded Polyaniline-Graphitic Carbon Nitride Nanosheet Composites for Piezoelectric Energy Conversion
    (American Chemical Society service@acs.org, 2019) Khalifa, M.; Anandhan, S.
    Herein, a facile approach was used to synthesize an ultrasensitive, durable, and flexible electrospun poly(vinylidene fluoride) (PVDF)/polyaniline (PANI)/graphitic carbon nitride nanosheets (g-C3N4) blend nanocomposite fibers (PPBF) based piezoelectric nanogenerator. PANI/g-C3N4 nanocomposite (PGNC) was prepared prior to its dispersal in PVDF. This unpretentious synthesis approach exploited the ?-nucleating activity of g-C3N4 along with the enhancement of electrical conductivity due to a network of PANI within individual PVDF nanofibers. Addition of PGNC and electrospinning synergistically enhanced the ?-phase content (?97%) of PVDF. The PPBF nanogenerator displayed remarkable improvement in the voltage and current output compared to pristine PVDF nanofibers (?1300%). The nanogenerator generated a voltage output of ?30 V and current output of 3.7 ?A with high stability and reproducibility (>50※000 cycles). The PPBF nanogenerator exhibited high-power density and conversion efficiency and was able to light up 70 commercial LEDs. The newly developed high performance nanogenerator could be a potential material in smart, self-powered wearable devices. © 2019 American Chemical Society.
  • No Thumbnail Available
    Item
    Physicochemical characteristics of bio-based thermoplastic polyurethane/graphene nanocomposite for piezoresistive strain sensor
    (John Wiley and Sons Inc. P.O.Box 18667 Newark NJ 07191-8667, 2020) Khalifa, M.; Ekbote, G.S.; Anandhan, S.; Wuzella, G.; Lammer, H.; Mahendran, A.R.
    Herein, we report the physicochemical characteristics and piezoresistive strain sensing performance of flexible thin film comprising graphene and bio-based thermoplastic polyurethane (TPU) prepared by solution cast method. A detailed analysis was carried to study the influence of graphene nanoplatelets on the morphological, thermal, mechanical, and electrical properties of TPU nanocomposite. Upon increasing the graphene nanoplatelets loading, the thermal stability and tensile properties improved remarkably, while glass transition temperature decreased slightly. Owing to better dispersion of graphene, the electrical conductivity was significantly increased, which broaden the utilization of the nanocomposite for various applications. The piezoresistive sensor was able to respond to various stress modes such as tapping, bending, and finger touch. The piezoresistive sensor was sensitive and achieved a gauge factor of 11. Sensor attached to finger, showed distinctive response upon bending at different angles and showed high stability and reproducibility even after >10,000 cycles under repetitive constant load. Also, the nanocomposite was able to detect any breakage or fracture in the form of change in electrical resistance. A combination of bio-based TPU and graphene offered improved physical properties and high sensing performance, which could be a potential material in flexible electronics and structural health monitoring systems. © 2020 Wiley Periodicals, Inc.
  • No Thumbnail Available
    Item
    Highly sensitive and wearable NO2gas sensor based on PVDF nanofabric containing embedded polyaniline/g-C3N4nanosheet composites
    (IOP Publishing Ltd, 2021) Khalifa, M.; Anandhan, S.
    In this study, a highly flexible and wearable nitrogen dioxide (NO2) gas sensor was fabricated based on electrospun poly(vinylidene fluoride) (PVDF)/polyaniline (PANi)/graphitic-carbon nitride (g-C3N4) blend nanocomposite (EBNC). g-C3N4/PANi nanocomposite (GPC) was synthesized by in situ polymerization technique prior to its incorporation into PVDF nanofibers, which ensured uniformity of dispersion. For the comparison study, PVDF/GPC nanocomposite film was fabricated using doctor blade technique. EBNC sensor exhibited high sensitivity, selectivity, reproducibility along with quick response and complete recovery. Electrospinning and GPC synergistically improved the performance of the EBNC based gas sensor. The superior gas sensing ability along with its low cost and the use of scalable electrospinning technique could make this system a promising one for the detection of gaseous NO2. © 2021 IOP Publishing Ltd.
  • No Thumbnail Available
    Item
    Development of a flexible piezoelectric and triboelectric energy harvester with piezo capacitive sensing ability from barium tungstate nanorod-dispersed PVDF nanofabrics
    (Institute of Physics, 2023) Ekbote, G.S.; Khalifa, M.; Venkatesa Perumal, B.; Anandhan, S.
    Lead-free flexible piezoelectric nanogenerator (PNG) and triboelectric nanogenerator (TENG) are sought after due to their ability to produce electricity by harnessing wasteful mechanical energy. A comprehensive understanding of additives and processing techniques is crucial for fine-tuning the performance of such energy systems. We have investigated in detail the effect of the addition of reverse microemulsion synthesized barium tungstate nanorods (BWN) on morphology, crystallinity, polymorphism of electrospun nanofabrics of poly(vinylidene fluoride) (PVDF). The electroactive phase content of the nanofabrics was enhanced upon the addition of BWN and the highest electroactive phase content of 86.5% was observed in the nanofabric containing 3 wt% of BWN. The dielectric constant of the nanofabric containing 5 wt% BWN was ∼1.96 times higher than that of pristine electrospun PVDF nanofabric (EPVDF). The ratio of relative change in the capacitance to initial capacitance of the sensor fabricated from the same system was ∼4 times greater than that of EPVDF. Consequently, its piezoelectric and triboelectric performances were improved. The PNG fabricated using the nanofabric containing 3 wt% BWN produced the highest open-circuit voltage of 8 V under an applied load of 8 N. A TENG made using the same system was able to produce a voltage output of 200 V, which was 1.77 times as high as that of EPVDF under one-finger tapping in contact-separation mode. The same composite nanofabric produced piezoelectric and triboelectric power densities of 4.3 µW cm−2 and 646 µW cm−2, respectively. The TENG was able to light 40 LEDs under one finger tapping. Fluttering-driven TENG fabricated using the aforementioned nanofabric was able to produce a triboelectric voltage of 84 V at a wind speed of 7 m s−1. Overall, these nanofabrics could be a potential material for energy harvesting devices for powering wearable devices, environmental sensors, and internet of things. © 2023 IOP Publishing Ltd