Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
6 results
Search Results
Item Durable, efficient, and flexible piezoelectric nanogenerator from electrospun PANi/HNT/PVDF blend nanocomposite(John Wiley and Sons Inc. cs-journals@wiley.com, 2019) Khalifa, M.; Mahendran, A.; Anandhan, S.Currently, there is considerable research focus on portable, lightweight, shock-resistant, and inexpensive wearable devices that are ideally powered by harvesting abundant mechanical or vibration energy, making battery or related wiring superfluous. In this study, piezoelectric nanogenerator was electrospun from PANi (polyaniline)/HNT (halloysite nanotube)/PVDF (poly[vinylidene fluoride]) blend nanocomposite. Polymorphism, crystallinity and morphology of the nanogenerator were explored in detail. HNT and PANi acted as a nucleating agent and conductive filler, respectively in PVDF; their synergism helps improve the piezoelectric performance of PVDF. The piezoelectric performance of the nanogenerator patch was studied under various external mechanical stresses, such as pressure, tapping, and impact. A maximum voltage output of approximately 7.2 V was generated by the nanogenerator under impact. The nanogenerator patch attached to human arm exhibited not only excellent piezoelectric response during arm movements, but, also proved to be flexible, highly sensitive and durable. This nanogenerator could possibly be used in wearable piezoelectric energy conversion application for self-powered devices. POLYM. COMPOS., 40:1663–1675, 2019. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics EngineersItem Cationic surfactant assisted enhancement of dielectric and piezoelectric properties of PVDF nanofibers for energy harvesting application(Royal Society of Chemistry, 2021) Ekbote, G.S.; Khalifa, M.; Mahendran, A.; Anandhan, S.Poly(vinylidene fluoride) (PVDF) is among the most versatile polymers due to its wide range of properties, including dielectric, piezoelectric and ferroelectric properties. However, more frequently than not a range of processing routes and/or additives have been used to enhance such properties. In this study, PVDF nanofibers were electrospun from PVDF solution that contained tetra-n-butyl ammonium chloride (TBAC) at different loadings (1, 2, 3, and 5 wt%). The effect of TBAC on the morphology, crystallinity, and polymorphism of PVDF was studied using various characterization techniques. Addition of TBAC significantly improved the electroactive ?-phase of PVDF. The highest ?-phase content of 89% was attained at a TBAC loading of 3 wt%. Consequently, the dielectric and piezoelectric properties of the PVDF nanofibers improved significantly. A nanogenerator fabricated using 3 wt% TBAC/PVDF nanofibers exhibited the maximum voltage output of 17.2 V (under 5 N force) and the maximum power density of ?1.4 ?W cm?2(under 3 N force). Improved dielectric and piezoelectric properties of PVDF upon the addition of a small amount of TBAC could be useful for researchers in upbringing the material for flexible electronic devices. © The Royal Society of Chemistry 2021.Item A study on electroactive PVDF/mica nanosheet composites with an enhanced ?-phase for capacitive and piezoelectric force sensing(Royal Society of Chemistry, 2021) Khalifa, M.; Schoeffmann, E.; Lammer, H.; Mahendran, A.R.; Wuzella, G.; Anandhan, S.Herein, a multifunctional poly(vinylidene fluoride) (PVDF)/mica nanosheet composite (PMNC) thin film was developed for preparing a capacitive and piezoelectric force sensor. A high electroactive ?-phase content (89%) of PVDF was achieved through a facile rapid cooling process of PMNC films. The crystallinity of PVDF decreased upon the addition of mica nanosheets, while the dielectric constant increased significantly (?300%). The capacitance-based PMNC pressure sensor was found to be sensitive to the applied pressure. On the other hand, piezoelectric voltages of 18 V (single layer) and 32 V (multi-layer) were generated for PMNCs loaded with 1% mica nanosheets. Furthermore, a PMNC based nanogenerator generated a power density of 8.8 ?W cm?2and showed excellent durability (>60?000 cycles). High flexibility, lightweight and skin-friendly PMNCs could be a potential material in applications such as energy harvesting, energy storage, actuators, and self-powered and smart wearable electronic devices. © The Royal Society of Chemistry 2021.Item Piezoelectric Energy Harvesting Using Flexible Self-Poled Electroactive Nanofabrics Based on PVDF/ZnO-Decorated SWCNT Nanocomposites(Springer, 2022) Khalifa, M.; Peravali, S.; Varsha, S.; Anandhan, S.This study probes the synergism of electrospinning and zinc oxide-decorated single-walled carbon nanotubes (ZCNT) in enhancing the β-phase nucleation and piezoelectric performance of PVDF. The nanofibers were spun in the form of nonwoven fabrics and characterized for their morphology, crystallinity, polymorphism, and tensile properties. Inclusion of ZCNT significantly promoted the β-phase (~95%) and tensile properties of PVDF, while the total degree of crystallinity was reduced. The highest voltage output of 15.5 V, which is 15 times more than that of the pristine PVDF nanofabrics, and a power density of 8.1 μWcm−2 was attained for the nanogenerator based on 0.75 wt.% ZCNT/PVDF nanofabrics. Implementation of electrospinning process and ZCNT proved to be beneficial in fabricating a flexible, lightweight, and robust nanogenerator for electronic devices. © 2022, The Minerals, Metals & Materials Society.Item Development of a flexible piezoelectric and triboelectric energy harvester with piezo capacitive sensing ability from barium tungstate nanorod-dispersed PVDF nanofabrics(Institute of Physics, 2023) Ekbote, G.S.; Khalifa, M.; Venkatesa Perumal, B.; Anandhan, S.Lead-free flexible piezoelectric nanogenerator (PNG) and triboelectric nanogenerator (TENG) are sought after due to their ability to produce electricity by harnessing wasteful mechanical energy. A comprehensive understanding of additives and processing techniques is crucial for fine-tuning the performance of such energy systems. We have investigated in detail the effect of the addition of reverse microemulsion synthesized barium tungstate nanorods (BWN) on morphology, crystallinity, polymorphism of electrospun nanofabrics of poly(vinylidene fluoride) (PVDF). The electroactive phase content of the nanofabrics was enhanced upon the addition of BWN and the highest electroactive phase content of 86.5% was observed in the nanofabric containing 3 wt% of BWN. The dielectric constant of the nanofabric containing 5 wt% BWN was ∼1.96 times higher than that of pristine electrospun PVDF nanofabric (EPVDF). The ratio of relative change in the capacitance to initial capacitance of the sensor fabricated from the same system was ∼4 times greater than that of EPVDF. Consequently, its piezoelectric and triboelectric performances were improved. The PNG fabricated using the nanofabric containing 3 wt% BWN produced the highest open-circuit voltage of 8 V under an applied load of 8 N. A TENG made using the same system was able to produce a voltage output of 200 V, which was 1.77 times as high as that of EPVDF under one-finger tapping in contact-separation mode. The same composite nanofabric produced piezoelectric and triboelectric power densities of 4.3 µW cm−2 and 646 µW cm−2, respectively. The TENG was able to light 40 LEDs under one finger tapping. Fluttering-driven TENG fabricated using the aforementioned nanofabric was able to produce a triboelectric voltage of 84 V at a wind speed of 7 m s−1. Overall, these nanofabrics could be a potential material for energy harvesting devices for powering wearable devices, environmental sensors, and internet of things. © 2023 IOP Publishing LtdItem A Facile Strategy to Achieve High Piezoelectric Performance in Electrospun Poly(Vinylidene Fluoride) Non-woven Nanofabrics(Korean Institute of Electrical and Electronic Material Engineers, 2024) Khalifa, M.; Kumar, M.; Subramanian, G.; Anandhan, S.Poly(vinylidene fluoride) (PVDF) with its piezoelectric characteristics holds the potential to be the promising candidate in microdevices, sensors and actuators. In this study, a facile strategy was adopted to augment the electroactive β-phase of electrospun PVDF non-woven nanofabric. Electrospun PVDF non-woven fabric was mechanically stretched at different strain rates. SEM images revealed that upon stretching the non-woven fabric, the fibers tend to orient along the stretching direction. The fibers from the necked region were characterized to understand effect of stretching on the polymorphism, crystallinity and piezoelectric performance. The β-phase content of PVDF increased upon increasing the strain rate, while the degree of crystallinity decreased slightly. The highest β-phase content of 79% was achieved for electrospun PVDF non-woven fabric stretched at 10 mm/min. Further, the piezoelectric performance of the stretched nanofabric was evaluated to assess its electroactive characteristics. The piezoelectric performance of electrospun PVDF fabric was studied by imparting the pressure/load by one-finger tapping, hand pressure and dropping weight. The highest output voltage and current of 8.4 V and 249 nA, respectively were obtained from the electrospun PVDF non-woven stretched at 10 mm/min, which is almost 8 times higher than that of the unstretched PVDF non-woven. Given the flexibility, lightweight with good piezoelectric performance these electrospun PVDF non-woven fabrics could be a potential material for energy harvesting and self-powered nano-electronic devices. Graphical Abstract: (Figure presented.) © The Korean Institute of Electrical and Electronic Material Engineers 2023.