Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Khalifa, M.Has files: No

Search Results

Now showing 1 - 10 of 21
  • No Thumbnail Available
    Item
    Comparative Studies on Crystalline and Amorphous Vinylidene Fluoride Based Fibrous Polymer Electrolytes for Sodium-Ion Batteries
    (Springer Singapore, 2020) Janakiraman, S.; Khalifa, M.; Biswal, R.; Ghosh, S.; Anandhan, S.; Adyam, A.
    In the present work, electrospun poly (vinylidene fluoride) (PVDF) and poly (vinylidene fluoride-co hexafluropropylene) (P(VdF-co-HFP)) fibrous membranes have been compared. Porous homo and copolymer fiber-based membranes with an interconnected structure, high porosity, large electrolyte uptake were prepared by an electrospinning route. The effect of crystallinity in terms of X-ray diffraction (XRD) was investigated for the fibrous polymer membranes (FPMs). The surface morphology of the FPMs is evaluated by field emission scanning electronmicroscopy (FESEM). The FPMswere soaked in 1MNaClO4-ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1, vol%) solution to form fibrous polymer electrolytes (FPEs). The ionic conductivity of copolymer showed 1.126 mS cm−1 under ambient temperature (at 28 °C) higher than the homopolymer (0.79 mS cm−1) because of HFP unit. The electrochemical stability window of the copolymer membrane also enhanced and stable up to 4.9 V versus Na+/Na suitable for high voltage sodium rechargeable batteries. When tested with Na066Fe0.5Mn05O2 as cathode and Na metal as an anode, the cycle performance significantly improved for the copolymer. © Springer Nature Singapore Pte Ltd. 2021.
  • No Thumbnail Available
    Item
    Graphene-based elastomer nanocomposites: A fascinating material for flexible sensors in health monitoring
    (CRC Press, 2022) Khalifa, M.; SelvaKumar, S.; Anandhan, S.
    [No abstract available]
  • No Thumbnail Available
    Item
    Polymer Electrolytes and Separators for Magnesium-Ion Batteries
    (CRC Press, 2024) Singh, R.; Khalifa, M.; Janakiraman, S.; Adyam, V.; Anandhan, S.; Biswas, K.
    Magnesium (Mg)-ion-based rechargeable batteries are attractive because magnesium is bivalent, abundant, non-toxic, and inexpensive. In the development of Mg-ion batteries (MIBs) with high energy densities, their ionic conductivity and safety have become important features. The most commonly used cathodes are Mo6S8, MoO3, V2O5, MnO2, and TiO2, but they are limited due to low voltages (<2.0 V) and low specific capacities. Therefore, electrolytes are needed to improve the voltage stability and ease of synthesis. In this chapter, polymer electrolytes and separators in MIBs with liquid or gel electrolytes are briefly outlined. Polymer electrolytes are classified into two categories, namely solid polymer electrolytes and gel polymer electrolytes (GPEs). Solid polymer electrolytes have several advantages such as high safety, lightweight, and favorable mechanical properties, but their weakness is their relatively lower ionic conductivity. To overcome these issues, GPE, which is a combination of liquid electrolyte and a polymer matrix, is explored. Poly(vinylidene fluoride)-based gel electrolytes showed a high ionic conductivity of the order of 10−3 S cm−1 at room temperature. In GPEs, an electrolyte is used as an ion transport medium between the electrodes, whereas a polymer membrane acts as a separator, thereby eliminating the physical contact between the electrodes. © 2025 selection and editorial matter, Prasanth Raghavan, Akhila Das, and Jabeen Fatima M. J.
  • No Thumbnail Available
    Item
    Rubber-based lightweight nanocomposites: spectroscopic characterization
    (Elsevier, 2025) Khalifa, M.; Anandhan, S.
    Carbon nanofiller-based rubber nanocomposites have gained considerable attention in academia and industries because of their suitability in various applications, including automobiles, sports, aerospace, medical, and structural components. The addition of carbon nanofillers, such as carbon nanotubes, graphene, carbon fibers, carbon black, and graphite, helps in tuning the electrical conductivity, thermal conductivity, barrier properties, and mechanical properties of rubbers. Some of these characteristics and properties of rubber nanocomposites can be studied using spectroscopic techniques. These techniques are rapid, nondestructive, highly sensitive, and provide molecular-level information. Various spectroscopic techniques, such as Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), etc., have been adopted that provide information on the dispersion of fillers, interfacial interactions, molecular bonds, orientations, elemental compositions, impurities, etc. This chapter provides an overview of the use of FTIR, Raman, XPS, and NMR spectroscopies in the characterization and analysis of carbon nanofiller-rubber composites. © 2026 Elsevier Inc. All rights reserved..
  • No Thumbnail Available
    Item
    Probing the synergism of halloysite nanotubes and electrospinning on crystallinity, polymorphism and piezoelectric performance of poly(vinylidene fluoride)
    (Royal Society of Chemistry, 2016) Khalifa, M.; Mahendran, A.; Anandhan, S.
    Poly(vinylidene fluoride) (PVDF) nanofibers have tremendous potential in nano-sensing and energy scavenging applications. In this study, uniaxially aligned nanofibers were developed from halloysite nanotubes (HNT)/PVDF nanocomposite using electrospinning technique. Incorporation of HNT into PVDF not only reduced the diameter of the electrospun nanofibers, but, also improved their morphology. Fourier transform infrared spectroscopy, wide angle X-ray diffraction and differential scanning calorimetry techniques were used to characterize the crystallinity, polymorphism and polymer-filler interaction in the nanocomposite nanofibers. A force sensor was indigenously designed to study the piezoelectric responses of the nanocomposite nanofibers. At 10 wt% of HNT loading, the sensor produced the highest voltage output, which can be ascribed to its highest ?-phase content. Incorporation of HNT and use of electrospinning synergistically enhanced the ?-phase content and hence the piezoelectric behavior of PVDF. Hence, these nanofibers could be promising and prominent materials in sensor and actuator applications. © The Royal Society of Chemistry.
  • No Thumbnail Available
    Item
    Synergism of Electrospinning and Nano-alumina Trihydrate on the Polymorphism, Crystallinity and Piezoelectric Performance of PVDF Nanofibers
    (Minerals, Metals and Materials Society 184 Thorn Hill Road Warrendale PA 15086, 2018) Khalifa, M.; Deeksha, B.; Mahendran, A.; Anandhan, S.
    Poly(vinlylidene fluoride) (PVDF) is known for its electroactive phases, which can be nucleated by incorporating nanoparticles into PVDF to enhance its piezoelectric performance. In this study, the synergistic effect of electrospinning and nano alumina trihydrate (ATH) filler was used to enhance the electroactive ? phase of PVDF. Electrospun nanofibers of PVDF/ATH nanocomposite (PANCF) were synthesized with different loadings of ATH. The presence of ATH enhances the surface charges of the electrospun droplets, leading to thinner fibers. The highest ?-phase content was found to be 70.1% for PANCF with 10% ATH. The piezoelectric performance of the nanofiber mats was studied using an indigenous setup. The highest voltage output of 840 mV was produced by PANCF with 10% ATH. These nanofibers could be a promising material in the field of sensors, actuators and energy-harvesting applications. © 2018, The Minerals, Metals & Materials Society.
  • No Thumbnail Available
    Item
    Synergism of graphitic-carbon nitride and electrospinning on the physico-chemical characteristics and piezoelectric properties of flexible poly(vinylidene fluoride) based nanogenerator
    (Springer Netherlands rbk@louisiana.edu, 2019) Khalifa, M.; Mahendran, A.; Anandhan, S.
    Herein, we investigated the piezoelectric performance of electrospun poly(vinylidene fluoride)/graphitic carbon nitride (PVDF/g-C 3 N 4 ) nanocomposite fibers (PGN-X). Addition of g-C 3 N 4 nanosheets improved the spinnability of nanofibers and augmented the ?-phase content of PVDF. The synthesized PGN non-woven mats were flexible and easily deformable without disrupting the continuity of fibers. Upon the addition of g-C 3 N 4 , tensile strength and thermal stability of nanocomposite fibers improved significantly. A maximum voltage output of ~7.5 V was generated for PGN nanogenerator which is ~8 times more than that of PVDF nanogenerator. Also, the PGN-X nanogenerator generated current output of 0.23 ?A and a power density of 0.22 ?W/cm ?2 . Improved physico-chemical characteristics and piezoelectric performance of PGN nanogeneratoris promising and makes it suitable for portable electronic and wearable devices. © 2019, The Polymer Society, Taipei.
  • No Thumbnail Available
    Item
    Durable, efficient, and flexible piezoelectric nanogenerator from electrospun PANi/HNT/PVDF blend nanocomposite
    (John Wiley and Sons Inc. cs-journals@wiley.com, 2019) Khalifa, M.; Mahendran, A.; Anandhan, S.
    Currently, there is considerable research focus on portable, lightweight, shock-resistant, and inexpensive wearable devices that are ideally powered by harvesting abundant mechanical or vibration energy, making battery or related wiring superfluous. In this study, piezoelectric nanogenerator was electrospun from PANi (polyaniline)/HNT (halloysite nanotube)/PVDF (poly[vinylidene fluoride]) blend nanocomposite. Polymorphism, crystallinity and morphology of the nanogenerator were explored in detail. HNT and PANi acted as a nucleating agent and conductive filler, respectively in PVDF; their synergism helps improve the piezoelectric performance of PVDF. The piezoelectric performance of the nanogenerator patch was studied under various external mechanical stresses, such as pressure, tapping, and impact. A maximum voltage output of approximately 7.2 V was generated by the nanogenerator under impact. The nanogenerator patch attached to human arm exhibited not only excellent piezoelectric response during arm movements, but, also proved to be flexible, highly sensitive and durable. This nanogenerator could possibly be used in wearable piezoelectric energy conversion application for self-powered devices. POLYM. COMPOS., 40:1663–1675, 2019. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics Engineers
  • No Thumbnail Available
    Item
    PVDF/halloysite nanocomposite-based non-wovens as gel polymer electrolyte for high safety lithium ion battery
    (John Wiley and Sons Inc. cs-journals@wiley.com, 2019) Khalifa, M.; Janakiraman, S.; Ghosh, S.; Adyam, A.; Anandhan, S.
    Gel polymer electrolyte (GPE) based on electrospun poly(vinylidene fluoride) (PVDF)/halloysite nanotube (HNT) nanocomposite non-wovens was synthesized and its suitability as a separator in lithium-ion battery (LIB) was explored. In this study, HNT played a key role in reducing the average diameter of the electrospun fibers and uplifted the porosity of the non-wovens thereby improving their electrolyte uptake. Due to a reduction in crystallinity and increased % porosity of the PVDF/HNT non-wovens, the ionic conductivity (1.77 mScm?1) and ionic transport across the separator were improved. Moreover, this GPE separator exhibited high tensile and puncture strength with negligible thermal shrinkage and a higher melting temperature compared with a commercially available separator, which is vital from the safety perspective. The cycling performance of Li/GPE/LiCoO2 cell was evaluated and it exhibited a high capacity of 138.01 mAhg?1 with 97% coulombic efficiency for the initial cycle. The cell was stable and retained its high performance with little loss in capacity even after repeated charge–discharge cycles. Such a combination of high ionic conductivity, tensile strength with low thermal shrinkage is seen to be very rare in polymer-based separators. It is noteworthy that this novel GPE outperformed the commercial separator also in the cycle performance. POLYM. COMPOS., 40:2320–2334, 2019. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics Engineers
  • No Thumbnail Available
    Item
    An electroactive ?-phase polyvinylidene fluoride as gel polymer electrolyte for magnesium–ion battery application
    (Elsevier B.V., 2019) Singh, R.; Janakiraman, S.; Khalifa, M.; Anandhan, S.; Ghosh, S.; Adyam, A.; Biswas, K.
    The gel polymer electrolytes (GPEs) are currently interesting research area in rechargeable batteries. In the present study, synthesis and characterization of electroactive gel polymer electrolyte (EGPE) for Mg-ion batteries application have been investigated. The bead free electroactive polyvinylidene fluoride (PVDF) with high porosity is achieved by an electrospinning process. The ?-phase of PVDF is polar and electroactive with a high dipole moment. Electroactive ?-phase is confirmed by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Field emission scanning electron microscopy (FESEM) study is done to analyze the structure and morphology of the electroactive membrane. The electroactive gel polymer electrolyte is formed by immersing an electroactive PVDF membrane in 0.3 M magnesium perchlorate (MgClO4) and propylene carbonate (PC) solution. The ionic conductivity of electroactive ?-phase PVDF membrane is achieved to be 1.49 mS cm?1 at 30 °C, which is higher than commercial available polypropylene (PP) Celgard. Tortuosity of electroactive gel polymer electrolyte is found to be 1.44. The voltage stability of the EGPE is stable up to a high voltage of 5.0 V against Mg+2/Mg. The total ionic transference number and magnesium ion transference number of EGPE are also investigated to confirm high ionic conductivity. © 2019 Elsevier B.V.