Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item A simple D-A-?-A configured carbazole based dye as an active photo-sensitizer: A comparative investigation on different parameters of cell(Elsevier B.V., 2020) Babu, D.D.; Naik, P.; Keremane, K.S.An organic photosensitizer (DP-1) with D-A-?-A architecture was systematically analyzed along with our previously reported dye N1. In the design, the dyes carry carbazole as donor, thiophene acetonitrile as ?-spacer connected to varied acceptor/anchoring unit i.e., cyanoacrylic acid (N1) and 4-aminobenzoic acid (DP-1). Generally, cyanoacrylic acid and carboxyl groups have been investigated extensively as effective electron acceptor/anchoring unit for the design of the sensitizer for dye-sensitized solar cells (DSSC) application and displayed superior photon conversion efficiency. In the present work, both the dyes were taken up for various studies focusing on photophysical, electrochemical, theoretical and photovoltaic investigation in the corresponding solar cells. From the photophysical and electrochemical studies it was established that, the both dyes show upright thermodynamic feasibility for electrochemical processes in the cell i.e., both electron and dye regeneration. Also, the DFT studies appends the existence of feasible HOMO-LUMO charge distribution. Finally, the devices fabricated by employing these dyes as sensitizer with 10 mM DCA as co-adsorbent. The device based on N1 displayed improved photon conversion efficiency compared to the cell sensitized using DP-1. This work may provide a new strategy for designing efficient photosensitizers to further ameliorate the DSSCs performance. © 2020 Elsevier B.V.Item Push-Pull Phenoxazine-Based Sensitizers for p-Type DSSCs: Effect of Acceptor Units on Photovoltaic Performance(John Wiley and Sons Inc, 2022) Keremane, K.S.; Planchat, A.; Pellegrin, Y.; Jacquemin, D.; Odobel, F.; Vasudeva Adhikari, A.Finding new efficient p-type sensitizers for NiO photocathodes is a great challenge for the development of promising low-cost tandem dye-sensitized solar cells (DSSCs). Now, the focus of researchers investigating these cells has been to create high-performance p-type systems. With this intention, herein, the design and synthesis of six new phenoxazine-based donor–acceptor (D–A)-configured organic dyes PO1–6 was reported, comprising different acceptor moieties specially designed for the sensitization of mesoporous p-type semiconductor NiO for the construction of p-type DSSCs (p-DSSCs). This work includes structural, photophysical, thermal, electrochemical, theoretical, and photoelectrochemical studies of these dyes, including evaluation of their structure-property relationships. The optical studies revealed that PO1–6 displayed adequate absorption and emission features in the range of 480–550 and 560–650 nm, respectively, with a bandgap in the order of 2.05–2.40 eV, and their thermodynamic parameters favored an efficient interfacial charge transfer involving NiO. Among the six new dyes, the device based on sensitizer PO2 carrying electron-withdrawing 1,3-diethyl-2-thiobarbituric acid achieved the highest power conversion efficiency of 0.031 % (short-circuit current density=0.89 mA cm−2, open-circuit voltage=101 mV, and fill factor=35 %). Conclusively, the study furnishes an understanding of the intricacies involved in the structural modification of phenoxazine-based sensitizers to further ameliorate the performance of the p-type DSSCs. © 2022 Wiley-VCH GmbH.Item Push-pull carbazole twin dyads as efficient sensitizers/co-sensitizers for DSSC application: effect of various anchoring groups on photovoltaic performance(Royal Society of Chemistry, 2025) Keremane, K.S.; Abdellah, I.M.; Eletmany, M.R.; Naik, P.; Anees, P.; Vasudeva Adhikari, A.V.To investigate the effect of various anchoring groups of organic sensitizers on fundamental processes occurring inside DSSCs and their overall performance, we designed and synthesized nine new double donor-acceptor (D-A) type organic dyes DCH1-9 comprising carbazole-based twin molecules as electron donors, with a non-conjugated linear alkyl chain as an extended linker featuring multiple acceptor units. Their photophysical, thermal, electrochemical, and theoretical properties were examined to gain a deeper understanding of the structure-property relationship. Photophysical results revealed that all dyes display ?abs and ?emi in the range of 400-470 nm and 500-560 nm, respectively, with a bandgap in the range of 2.46-2.74 eV. The push-pull structure with extended conjugation results in strong fluorescence characteristics. Photophysical and electrochemical studies confirm their thermodynamic feasibility for electron injection, recombination, and dye regeneration in cells. Quantum chemical simulations further provided insights into their structural, electronic, and optical parameters. New DSSCs were fabricated employing dyes DCH1-9 as sensitizers/co-sensitizers. The cell sensitized with DCH1 achieved the highest power conversion efficiency (PCE) of 2.45% under standard AM 1.5 solar conditions. Furthermore, co-sensitization of DCH1-9 with the Ru-based HD-2 sensitizer resulted in an improved PCE of 8.82% for DCH2, surpassing HD-2 alone (6.79%). EIS studies were conducted to further explore their energy conversion processes. Conclusively, these investigations highlight the significant potential of dyes carrying carbazole twin molecules with different anchoring units in enhancing the overall performance of DSSCs. © 2025 The Royal Society of Chemistry.Item Enhancing the Photoelectrochemical Performance of Ru(II)-Sensitized Dye-Sensitized Solar Cells Using Cyanopyridine-Based Cosensitizers(John Wiley and Sons Inc, 2025) Naik, P.; Abdellah, I.M.; Abdel-Shakour, M.; Keremane, K.S.; Vasudeva Adhikari, A.V.The cosensitization approach is one of the widely adopted strategies for systematically enhancing photovoltaic performance of dye-sensitized solar cells (DSSCs) by utilizing two or more dyes with distinct absorption spectra. This method achieves panchromatic absorption, improves intramolecular charge transfer performance, prevents dye aggregation, and increases dye loading capability. In this study, we investigated four previously reported push–pull-type dianchored chromophores (CP1–4) featuring a cyanopyridine scaffold as cosensitizer to enhance the performance of Ru(II)-based N3-sensitized DSSCs. Both the co-sensitized devices (N3 + CP1–4) and the N3-only devices were fabricated using a fixed dye concentration of 0.2 mM for each sensitizer/cosensitizers, while the coadsorbent chenodeoxycholic acid (CDCA) was systematically varied between 0 and 20 mM. This systematic variation of CDCA concentration was designed to examine its role in suppressing dye aggregation and modulating interfacial charge dynamics. Among the Series, CP4, carrying a thiobarbituric acid anchoring/acceptor group, demonstrated superior performance at all CDCA concentrations, achieving power conversion efficiency of 6.67%, 6.79%, and 5.74%, compared to 6.02%, 6.10%, and 5.44% for devices sensitized with N3 alone. Further, electrochemical impedance spectroscopy measurements confirmed the improved charge transport and reduced recombination in these devices. These findings highlight the potential of rationally engineered cosensitizers and optimized coadsorbent concentrations for enhancing the performance of metal-based sensitizers in DSSCs. © 2025 Wiley-VCH GmbH.