Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Kattimani, S.Subject: search.filters.subject.Finite element method

Search Results

Now showing 1 - 10 of 12
  • No Thumbnail Available
    Item
    Investigation of the effect of BaTiO3/CoFe2O4 particle arrangement on the static response of magneto-electro-thermo-elastic plates
    (Elsevier Ltd, 2018) Mahesh, M.; Kattimani, S.
    In this article, a framework based on finite element (FE) methods is proposed for predicting the influence of spatial arrangement of two phase Barium Titanate (BaTiO3) and Cobalt Ferric Oxide (CoFe2O4) particulate composites on the static response of magneto-electro-thermo-elastic (METE) plates. The coupled material properties such as piezoelectric, piezomagnetic, dielectric, magnetic permeability, thermal expansion and pyro co-efficients vary significantly with the spatial arrangement of BaTiO3/CoFe2O4 particulates. The coupled FE governing equations accounting the effect of particle arrangement is presented by incorporating linear coupled constitutive equations of METE composites. Through the condensation technique, the governing equations of METE plates are solved to obtain direct (thermal displacements, electric and magnetic potentials) and derived quantities (stresses, electric displacements and magnetic flux densities). A special attention has been placed on evaluating the pyro-electric and pyro-magnetic coupling effects for different packing arrangement considered namely, Body Centered Cubic (BCC), Face Centered Cubic (FCC) and Simple Cubic (SC) METE particulate composites. Further, parametric studies are carried out to analyse the influence of boundary conditions and aspect ratio. The present study reveals that the multiphysics response of METE plates changes significantly with the packing arrangements of BaTiO3/CoFe2O4 particulates and geometrical parameters. It is believed that the obtained solutions would provide insights into design aspects of METE structures. © 2017 Elsevier Ltd
  • No Thumbnail Available
    Item
    Influence of coupled fields on free vibration and static behavior of functionally graded magneto-electro-thermo-elastic plate
    (SAGE Publications Ltd info@sagepub.co.uk, 2018) Mahesh, M.; Sagar, P.J.; Kattimani, S.
    In this article, the influence of full coupling between thermal, elastic, magnetic, and electric fields on the natural frequency of functionally graded magneto-electro-thermo-elastic plates has been investigated using finite element methods. The contribution of overall coupling effect as well as individual elastic, piezoelectric, piezomagnetic, and thermal phases toward the stiffness of magneto-electro-thermo-elastic plates is evaluated. A finite element formulation is derived using Hamilton’s principle and coupled constitutive equations of magneto-electro-thermo-elastic material. Based on the first-order shear deformation theory, kinematics relations are established and the corresponding finite element model is developed. Furthermore, the static studies of magneto-electro-elastic plate have been carried out by reducing the fully coupled finite element formulation to partially coupled state. Particular attention has been paid to investigate the influence of thermal fields, electric fields, and magnetic fields on the behavior of magneto-electro-elastic plate. In addition, the effect of pyrocoupling on the magneto-electro-elastic plate has also been studied. Furthermore, the effect of geometrical parameters such as aspect ratio, length-to-thickness ratio, stacking sequence, and boundary conditions is studied in detail. The investigation may contribute significantly in enhancing the performance and applicability of functionally graded magneto-electro-thermo-elastic structures in the field of sensors and actuators. © 2017, © The Author(s) 2017.
  • No Thumbnail Available
    Item
    Free vibration and static analysis of functionally graded skew magneto-electro-elastic plate
    (Techno-Press, 2018) Kiran, M.C.; Kattimani, S.
    This article presents a finite element (FE) model to assess the free vibration and static response of a functionally graded skew magneto-electro-elastic (FGSMEE) plate. Through the thickness material grading of FGSMEE plate is achieved using power law distribution. The coupled constitutive equations along with the total potential energy approach are used to develop the FE model of FGSMEE plate. The transformation matrix is utilized in bringing out the element matrix corresponding to the global axis to a local axis along the skew edges to specify proper boundary conditions. The effect of skew angle on the natural frequency of an FGSMEE plate is analysed. Further, the study includes the evaluation of the static behavior of FGSMEEplate for various skew angles.The influence of skew angle on the primary quantities such as displacements, electric potential, and magnetic potential, and secondary quantities such as stresses, electric displacement and magnetic induction is studied indetail. In addition, the effect of power-law gradient, thickness ratio, boundary conditions and aspect ratio on the free vibration and static response characteristics of FGSMEE plate has been investigated. © 2018 Techno-Press, Ltd.
  • No Thumbnail Available
    Item
    Buckling analysis of skew magneto-electro-elastic plates under in-plane loading
    (SAGE Publications Ltd info@sagepub.co.uk, 2018) Kiran, M.C.; Kattimani, S.
    This article deals with the study of buckling behaviour of multilayered skew magneto-electro-elastic plate under uniaxial and biaxial in-plane loadings. The skew edges of the skew magneto-electro-elastic plate are obtained by transforming the local skew coordinate to the global using a transformation matrix. The displacement fields corresponding to the first-order shear deformation theory along with constitutive equations of magneto-electro-elastic materials are used to develop a finite element model. The finite element model encompasses the coupling between electric, magnetic and elastic fields. The in-plane stress distribution within the skew magneto-electro-elastic plate due to the enacted force is considered to be equivalent to the applied in-plane compressive loads in the pre-buckling range. This stress distribution is used to derive the potential energy functional of the skew magneto-electro-elastic plate. The non-dimensional critical buckling load is attained from the solution of the allied linear eigenvalue problem. Influence of skew angle, stacking sequence, span-to-thickness ratio, aspect ratio and boundary condition on the critical buckling load and their corresponding mode shapes is investigated. © 2018, © The Author(s) 2018.
  • No Thumbnail Available
    Item
    Vibration control of multiferroic fibrous composite plates using active constrained layer damping
    (Academic Press, 2018) Kattimani, S.; Ray, M.C.
    Geometrically nonlinear vibration control of fiber reinforced magneto-electro-elastic or multiferroic fibrous composite plates using active constrained layer damping treatment has been investigated. The piezoelectric (BaTiO3) fibers are embedded in the magnetostrictive (CoFe2O4) matrix forming magneto-electro-elastic or multiferroic smart composite. A three-dimensional finite element model of such fiber reinforced magneto-electro-elastic plates integrated with the active constrained layer damping patches is developed. Influence of electro-elastic, magneto-elastic and electromagnetic coupled fields on the vibration has been studied. The Golla–Hughes–McTavish method in time domain is employed for modeling a constrained viscoelastic layer of the active constrained layer damping treatment. The von Kármán type nonlinear strain-displacement relations are incorporated for developing a three-dimensional finite element model. Effect of fiber volume fraction, fiber orientation and boundary conditions on the control of geometrically nonlinear vibration of the fiber reinforced magneto-electro-elastic plates is investigated. The performance of the active constrained layer damping treatment due to the variation of piezoelectric fiber orientation angle in the 1–3 Piezoelectric constraining layer of the active constrained layer damping treatment has also been emphasized. © 2018 Elsevier Ltd
  • No Thumbnail Available
    Item
    Finite element simulation of controlled frequency response of skew multiphase magneto-electro-elastic plates
    (SAGE Publications Ltd info@sagepub.co.uk, 2019) Mahesh, M.; Kattimani, S.
    The linear frequency response of skew multiphase magneto-electro-elastic composite plate embedded with active constrained layer damping treatment has been studied. The volume fraction of piezoelectric fibres embedded in the piezomagnetic matrix significantly affects the coupling characteristic of this multiferroic material, and hence, the frequency of the skew multiphase magneto-electro-elastic plate is drastically altered. This study emphasizes on evaluating the influence of different volume fraction of barium titanate (BaTiO3) and cobalt ferrite (CoFe2O4) on the frequency characteristics of skew multiphase magneto-electro-elastic. In this regard, a finite element formulation has been proposed to assess the damped response of such skew multiphase magneto-electro-elastic plates. Incorporating the complex modulus approach, the constrained viscoelastic layer of the active constrained layer damping patch is modelled. In addition, the effect of geometrical skewness has also been investigated. Meanwhile, an exhaustive parametric study is carried out to analyse the influence of control gain, patch position and fibre orientation angle of piezoelectric composite. © The Author(s) 2019.
  • No Thumbnail Available
    Item
    On vibration analysis of functionally graded carbon nanotube reinforced magneto-electro-elastic plates with different electro-magnetic conditions using higher order finite element methods
    (China Ordnance Industry Corporation, 2021) Mahesh, M.; Harursampath, D.; Kattimani, S.
    This article deals with evaluating the frequency response of functionally graded carbon nanotube reinforced magneto-electro-elastic (FG-CNTMEE) plates subjected to open and closed electro-magnetic circuit conditions. In this regard finite element formulation has been derived. The plate kinematics adjudged via higher order shear deformation theory (HSDT) is considered for evaluation. The equations of motion are obtained with the help of Hamilton's principle and solved using condensation technique. It is found that the convergence and accuracy of the present FE formulation is very good to address the vibration problem of FG-CNTMEE plate. For the first time, frequency response analysis of FG-CNTMEE plates considering the effect of various circuit conditions associated with parameters such as CNT distributions, volume fraction, skew angle, aspect ratio, length-to-thickness ratio and coupling fields has been carried out. The results of this article can serve as benchmark for future development and analysis of smart structures. © 2020 The Authors
  • No Thumbnail Available
    Item
    Effect of different geometrical non-uniformities on nonlinear vibration of porous functionally graded skew plates: A finite element study
    (China Ordnance Industry Corporation, 2022) Kumar H S, H.S.; Kattimani, S.
    This article presents the investigation of nonlinear vibration analysis of tapered porous functionally graded skew (TPFGS) plate considering the effects of geometrical non-uniformities to optimize the thickness in the structural design. The TPFGS plate is analyzed considering linearly, bi-linearly, and exponentially varying thicknesses. The plate's effective material properties are tailor-made using a modified power-law distribution in which gradation varies along the thickness direction of the TPFGS plate. Incorporating the non-linear finite element formulation to develop the kinematic equation's displacement model for the TPFGS plate is based on the first-order shear deformation theory (FSDT) in conjunction with von Karman's nonlinearity. The nonlinear governing equations are established by Hamilton's principle. The direct iterative method is adopted to solve the nonlinear mathematical relations to obtain the nonlinear frequencies. The influence of the porosity distributions and porosity parameter indices on the nonlinear frequency responses of the TPFGS plate for different skew angles and variable thicknesses are studied for various geometrical parameters. The influence of taper ratio, variable thickness, skewness, porosity distributions, gradation, and boundary conditions on the plate's nonlinear vibration is demonstrated. The nonlinear frequency analysis reveals that the geometrical non-uniformities and porosities significantly influence the porous functionally graded plates with varying thickness than the uniform thickness. Besides, exponentially and linearly variable thicknesses can be considered for the thickness optimizations of TPFGS plates in the structural design. © 2021 China Ordnance Society
  • No Thumbnail Available
    Item
    Influence of Temperature and Moisture on Free Vibration Behavior of Skew Laminated Composite Sandwich Panels with CNTRC Core
    (World Scientific, 2022) Kallannavar, V.; Kattimani, S.; Ramesh, H.
    This paper presents the influence of temperature and moisture on the free vibration characteristics of skew laminated composite sandwich (SLCS) panels. The face sheets of the panels are made of graphite-epoxy composite, while the core consists of carbon nanotube-reinforced composite. The coupled hygro-elastic and thermo-elastic relations for the SLCS shells/panels are formulated using first-order shear deformation theory. The nonmechanical stiffness matrices are represented by the initial stress stiffness matrix developed using nonlinear strain-displacement relations. The temperature and moisture-dependent material properties are considered to analyze the laminated composite sandwich spherical, hyperbolic, ellipsoid, cylindrical Shells, and flat plates. Several numerical examples are comprehensively studied to establish the influence of temperature, moisture, the volume fraction of carbon nanotubes in the core material, functional gradation types, skew angle, and edge constraints on the vibration responses of SLCS shells. Further exploration is devoted to studying the combined effect of moisture, temperature, and the geometrical parameters such as length to width ratio, length to thickness ratio, radius-to-length ratio, and the core thickness to face sheet thickness ratios on the natural frequency of the skew laminated composite sandwich panels. © 2022 World Scientific Publishing Company.
  • No Thumbnail Available
    Item
    Frequency response analysis of edge-cracked magneto-electro-elastic functionally graded plates using extended finite element method
    (Elsevier B.V., 2022) Sh, E.L.; Kattimani, S.; Thoi Trung, N.
    This paper studies the frequency response of edge-cracked magneto-electro elastic functionally graded (ECMEE-FG) plates using the extended finite element method (XFEM). First-order shear deformation theory (FSDT), von Karman's nonlinear strain-displacement equations, and a modified power-law are used to develop the numerical model. The coupled equations are derived and analyzed using Hamilton's principle and extended finite element methods. The influence of B-rich bottom and F-rich bottom material gradation, crack orientation, crack length, and aspect ratio on the geometrically nonlinear frequency response was investigated after the current study was validated. Furthermore, crack propagation behavior in the ECMEE-FG plate was examined. The results could be helpful for the design of functionally graded magneto electro elastic structures and devices. © 2022 Elsevier Ltd