Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Rooftop photovoltaic energy production management in india using earth-observation data and modeling techniques(MDPI AG rasetti@mdpi.com Postfach Basel CH-4005, 2020) Masoom, A.; Kosmopoulos, P.; Kashyap, Y.; Kumar, S.; Bansal, A.This study estimates the photovoltaic (PV) energy production from the rooftop solar plant of the National Institute of Technology Karnataka (NITK) and the impact of clouds and aerosols on the PV energy production based on earth observation (EO)-related techniques and solar resource modeling. The post-processed satellite remote sensing observations from the INSAT-3D have been used in combination with Copernicus Atmosphere Monitoring Service (CAMS) 1-day forecasts to perform the Indian Solar Irradiance Operational System (INSIOS) simulations. NITK experiences cloudy conditions for a major part of the year that attenuates the solar irradiance available for PV energy production and the aerosols cause performance issues in the PV installations and maintenance. The proposed methodology employs cloud optical thickness (COT) and aerosol optical depth (AOD) to perform the INSIOS simulations and quantify the impact of clouds and aerosols on solar energy potential, quarter-hourly monitoring, forecasting energy production and financial analysis. The irradiance forecast accuracy was evaluated for 15 min, monthly, and seasonal time horizons, and the correlation was found to be 0.82 with most of the percentage difference within 25% for clear-sky conditions. For cloudy conditions, 27% of cases were found to be within ±50% difference of the percentage difference between the INSIOS and silicon irradiance sensor (SIS) irradiance and it was 60% for clear-sky conditions. The proposed methodology is operationally ready and is able to support the rooftop PV energy production management by providing solar irradiance simulations and realistic energy production estimations. © 2020 by the authors.Item Enhancing Solar Energy Forecast Using Multi-Column Convolutional Neural Network and Multipoint Time Series Approach(MDPI, 2023) Kumar, A.; Kashyap, Y.; Kosmopoulos, P.The rapid expansion of solar industries presents unknown technological challenges. A dedicated and suitable energy forecast is an effective solution for the daily dispatching and production of the electricity grid. The traditional forecast technique uses weather and plant parameters as the model information. Nevertheless, these are insufficient to consider problematic weather variability and the various plant characteristics in the actual field. Considering the above facts and inspired by the excellent implementation of the multi-column convolutional neural network (MCNN) in image processing, we developed a novel approach for forecasting solar energy by transforming multipoint time series (MT) into images for the MCNN to examine. We first processed the data to convert the time series solar energy into image matrices. We observed that the MCNN showed a preeminent response under a ground-based high-resolution spatial–temporal image matrix with a 0.2826% and 0.5826% RMSE for 15 min-ahead forecast under clear (CR) and cloudy (CD) conditions, respectively. Our process was performed on the MATLAB deep learning platform and tested on CR and CD solar energy conditions. The excellent execution of the suggested technique was compared with state-of-the-art deep neural network solar forecasting techniques. © 2022 by the authors.Item Solar Photovoltaic Hotspot Inspection Using Unmanned Aerial Vehicle Thermal Images at a Solar Field in South India(MDPI, 2023) Umesh, P.; Kashyap, Y.; Baxevanaki, E.; Kosmopoulos, P.The sun is an abundant source of energy, and solar energy has been at the forefront of the renewable energy sector for years. A way to convert it into electricity is by the use of solar cells. Multiple solar cells, connected to each other, create solar panels, which in their turn, are connected in a solar string, and they create solar farms. These structures are extremely efficient in electricity production, but also, cells are fragile in nature and delicate to environmental conditions, which is the reason why some of them show discrepancies and are called defective. In this research, a thermal camera mounted on a drone has been used for the first time in the solar farm operating conditions of India in order to capture images of the solar field and investigate solar panels for defective cells and create an orthomosaic image of the entire area. This procedure next year will be established on an international scale as a best practice example for commercialization, providing effortless photovoltaic monitoring and maintenance planning. For this process, an open source software WebODM has been used, and the entire field was digitized so as to identify the location of defective panels in the field. This software was the base in order to provide and analyze a digital twin of the studied area and the included photovoltaic panels. The defects on solar cells were identified with the use of thermal bands, which record and point out their temperature of them, whereas anomalies in the detected temperature in defective solar cells were captured using thermal electromagnetic waves, and these areas are mentioned as hotspots. In this research, a total number of 232.934 solar panels were identified, and 2481 defective solar panels were automatically indicated. The majority of the defects were due to manufacturing failure and normal aging, but also due to persistent shadowing and soiling from aerosols and especially dust transport, as well as from extreme weather conditions, including hail. The originality of this study relies on the application of the proposed under development technology to the specific conditions of India, including high photovoltaic panels wear rates due to extreme aerosol loads (India presents one of the highest aerosol levels worldwide) and the monsoon effects. The ability to autonomously monitor solar farms in such conditions has a strong energy and economic benefit for production management and for long-term optimization purposes. © 2023 by the authors.Item Investigation of performance and technical assessments of hybrid source electric vehicles under different locations and driving conditions(Taylor and Francis Ltd., 2024) Sidharthan P, V.; Kashyap, Y.Sustainable transportation is a significant concept followed by nations implementing Nationally Determined Contributions (NDCs) that reduce emissions and adapt to climate change impacts. Electric vehicle (EV) adoption has accelerated; however, a trade-off exists between EV adoption and EV batteries-Battery charging from the grid (conventional energy sources) and e-wastes from retired batteries deposited in landfills. Thus, EVs associated with renewable energy sources (RES) are an alternate solution. This paper proposes a hybrid source electric vehicle (HSEV) with a high energy-dense supercapacitor (SC) as the primary source and PV energy as the secondary source. An energy management algorithm (EMA) with a modified controller is implemented in a Matlab/Simulink environment. Analysis of HSEV under varying locations (Australia, India, and Scotland), driving profiles (WLTP class-1, IDC, and ECE), and driving times (daytime, nighttime) highlights the importance of the proposed EMA. Grid charging instants are reduced to 3 times per month in Australia under WLTP class-1 cycle employing PV energy. Moreover, SC degradation is least compared to the lithium-ion battery in a BEV (Battery Electric Vehicle), hence avoiding the chances of maintenance and replacements. The proposed HSEV exhibits improved performance compared to BEVs of a similar type under different locations, driving, and environmental conditions. © 2023 Taylor & Francis Group, LLC.Item Ray-Tracing modeling for urban photovoltaic energy planning and management(Elsevier Ltd, 2024) Kosmopoulos, P.; Dhake, H.; Kartoudi, D.; Tsavalos, A.; Koutsantoni, P.; Katranitsas, A.; Lavdakis, N.; Mengou, E.; Kashyap, Y.The traditional Radiative Transfer Modelling solutions for Solar Energy monitoring and forecasting often provide outputs for a single point location or an area location. However, for high resolution representation of areas these solutions suffer due to low simulation speeds. This approach makes it difficult for decision-makers to accurately estimate the solar potential of the administrative area and plan installations accordingly. In this direction, the study introduces three-dimensional Ray-Tracing based radiative modeling which is a high-speed area-based solution for solar energy monitoring. The three-dimensional ray-tracing was simulated by using advanced graphic creation platforms and cloud computing in conjunction with satellite data of the clouds, aerosols, building shadows effects and three-dimensional representations of the city using Cesium 3D tiles and Unreal Engine ®. The entire system was developed in a hybrid model to be exploited by urban planners for solar PV installations and by electricity distribution system operators for energy management and efficient incorporation of the produced energy into the regular and smart grids. This study implements and analyses this Ray-Tracing model for solar photovoltaic energy potential estimation at a rooftop level for the city of Athens, Greece. The total rooftop exploitable area in Athens was found to be close to 34 km2, which is able to massively host distributed PVs followed by almost 4.3 TWh of annually produced energy, whilst Penteli (a Municipality in Athens) possessed a potential of 96.8 GWh with an exploitable area of just 0.8 km2. This amount of energy, in a hypothetical full coverage scenario, is able to provide for 48.7% of Athens's total energy requirement. Similar year-long simulations were conducted using the EU's largest rooftop solar installation at Stavros Niarchos Foundation Cultural Center and randomly selected rooftops having solar installations in different municipalities in Athens. With these estimated solar potential values, the gross savings in natural gas consumption and hence the CO2 equivalent emissions can be computed. With the current estimated solar potential of Athens, the analyzed savings accounted of nearly 2.43 billion euros and 18 MT CO2 equivalent emissions. These computed annual savings are capable of covering installation costs for nearly 100,000 new solar installations. The end-product of this study is the development of a solar cadastre web tool which will support the decision-makers in the energy transition policies and the solar PV penetration into the urban environment and eventually drive the effort into renewable energy transition across the globe. © 2024 The Author(s)