Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Hydrodynamic performance of pile restrained U-shaped OWC device using boundary element method(Elsevier Ltd, 2024) Muduli, R.; Patil, S.B.; Karmakar, D.The hydrodynamic performance of a pile-restrained U-shaped Oscillating Water Column (U-OWC) device under the action of normal incident waves is analysed using the Boundary Element Method (BEM). The hydrodynamic parameters, such as the radiation susceptance and conductance coefficients and hydrodynamic efficiency, are analysed for various cases of different structural parameters of U-OWC. It is observed that the theoretical maximum efficiency can be achieved for a wide range of wavenumbers by appropriate tweaking and optimisation of the device geometry. The resonance enables the device to reach the maximum possible efficiency and the phenomenon of obtaining the maximum efficiency of the final optimised geometry is achieved. The shorter length of draft of the device is chosen over longer draft considering the high construction cost as well as efficiency enhancement of the device, even though the longer draft is observed to perform marginally better in a narrow wave number range. The numerical investigation of the theoretical maximum efficiency is observed to be 100% whenever the μ (dimensionless radiation susceptance coefficient) crosses the zero mark. Consequently, the maximum theoretical efficiency is observed close to maximum whenever μ is close to zero. The final optimised geometry consisting of an inward inclined top wall configuration performs best but could be challenging in actual construction. Further, on inclining the bottom wall in the inwards or outward direction does not result in better performance than inclining only the top wall. The present study explores a novel concept of pile-restrained U-OWC kept near the surface and will be helpful in determining the best-performing geometry for the device. © 2023 Elsevier LtdItem Hydrodynamic performance of an oscillating water column WEC integrated with a pile-restrained H-type breakwater(Taylor and Francis Ltd., 2025) Vishwakarma, R.D.; Muduli, R.; Karmakar, D.The present study examines the hydrodynamic performance of an oscillating water column (OWC) wave energy converter (WEC) integrated into a pile restrained H-type breakwater. A three-dimensional model study is performed using ANSYS-AQWA based on potential flow theory. The results for the incident wave excitation force, shear force, and bending moment on the pile restrained breakwater and the transmission coefficient are obtained for the regular waves. The effect of incident wave angle on the forces is assessed along with the impact of changes in relative draft and width of the device. The power capture efficiency as well as wave transformation characteristics of the device are evaluated using Boundary Element Method (BEM). The study performed will be helpful to scientists and researchers to design and develop an integrated hybrid breakwater system that can protect the coast and provide useful energy by minimising the impact on the marine ecological system and environment. © 2025 Informa UK Limited, trading as Taylor & Francis Group.Item Hydrodynamic analysis of U-shaped OWC with varying bottom profiles integrated with ?-breakwater(SAGE Publications Ltd, 2025) Muduli, R.; Karmakar, D.In the present study, the fixed U-OWC integrated with ?-shaped breakwater is analysed considering three different bottom profiles (straight, inclined, and curved) of the interior chamber of the U-OWC. The hydrodynamic performance is assessed based on the theoretical maximum efficiency, radiation susceptance and conductance, reflection, transmission and dissipation coefficients and force coefficient on the top lip wall of U-OWC and front face of breakwater. The influence of geometric variations such as width of U-channel, draft of U-OWC, draft and width of breakwater and distance between the two structures on the hydrodynamic performance is analysed using Boundary Element Method (BEM). The study depicts that the presence of a wider U-channel width impairs the energy conversion efficiency of the U-OWC and increasing the draft of the U-OWC improves the efficiency of the device. Further, changing the bottom profile of the internal chamber of U-OWC changes the natural frequency of the device without hampering the efficiency. In addition, as the distance between the two structures is increased, transmission of waves decreases. The influence of wave force on the breakwater is noted to be maximum when the leading U-OWC structure has a curved bottom. The study on the variation of the bottom profile of the fixed U-OWC integrated with breakwater will be helpful in the design and analysis of efficient hybrid floating breakwater system. © IMechE 2024. This article is distributed under the terms of the Creative Commons Attribution 4.0 License (https://creativecommons.org/licenses/by/4.0/) which permits any use, reproduction and distribution of the work without further permission provided the original work is attributed as specified on the SAGE and Open Access page (https://us.sagepub.com/en-us/nam/open-access-at-sage).