Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item A corner expanded slot antenna loaded with copper strips for dual-band circular polarization characteristics(John Wiley and Sons Inc. P.O.Box 18667 Newark NJ 07191-8667, 2020) Paul, P.M.; Kandasamy, K.; Sharawi, M.S.In this article, the design and implementation of a dual-band circularly polarized (CP) microstrip line fed square slot antenna with compact size is proposed. The proposed CP antenna consists of a square slot antenna with a pair of symmetric rectangular extensions on opposite corners and loaded with an array of inclined and truncated rectangular copper strips. The square slot with diagonal extensions resonates at 2.24 to 2.62 GHz with a 3 dB axial ratio (AR) bandwidth of 15.7%. Besides, loading it with an array of inclined and truncated rectangular copper strips helps produce a resonance at higher band with CP. The higher band operates between 3.26 and 5.18 GHz and centered at 4.52 GHz, with a 3 dB AR bandwidth of 45.5%. The polarization sense and resonant frequency of the proposed antenna can be independently tuned depending on the position and dimensions of the slot and strips, respectively. The proposed antenna is fabricated and measured in terms of impedance bandwidth, axial ratio bandwidth, peak gain, and radiation efficiency. Good agreement between the simulations and measurements of the prototype is obtained. © 2019 Wiley Periodicals, Inc.Item A Novel Single-Layered Dual-Wideband Circularly Polarized Asymmetric Slot Antenna for Wireless Applications(Electromagnetics Academy, 2024) Shankaraiah, P.H.; Shet, N.S.V.; Kandasamy, K.This work focuses on the design and implementation of a dual-wideband asymmetric square-shaped slot radiator with coplanar waveguide (CPW) feed for circular polarization (CP) characteristics. The proposed radiator has inward ground plane extensions in the form of square and rectangular strips on the diagonal corners of the slot. By optimizing the size of strips, a dual-band antenna with CP behaviour is obtained. The inverted L-shaped grounded strip improves axial ratio bandwidth (ARBW). The extended signal line terminated in a wide tuning stub significantly improves impedance bandwidth (IBW) and also further enhances ARBW. The designed asymmetric slot radiator is fabricated using an FR-4 substrate material of dimensions 50×50×1.6 mm3. This antenna design gives flexibility to alter polarization sense at the dual frequency bands. Further, edge effects are analyzed through electric field distribution, and their impact on impedance and AR characteristics are studied. It is designed, fabricated, and tested, and shows right-hand circular polarization (RHCP) response at 3 GHz and 7.5 GHz in the +Z direction. The experimentally verified results show −10-dB IBWs of 40.12% (range from 2.61 GHz to 3.92 GHz) and 40.21% (range from 6 GHz to 9.02 GHz), and 3-dB ARBWs are 20% (range from 2.70 GHz to 3.30 GHz) and 40.21% (range from 6 GHz to 9.02 GHz) at the resonance bands. The experimentally measured and simulated performance parameters of the prototype are in close agreement. The proposed perturbed slot radiator is well suited for Wi-Fi 6E communication and remote sensing applications. © 2024, Electromagnetics Academy. All rights reserved.