Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
7 results
Search Results
Item An electronically switchable UWB to narrow band antenna for cognitive radio applications(John Wiley and Sons Inc. P.O.Box 18667 Newark NJ 07191-8667, 2020) Jacob, N.; Kulkarni, M.; Kandasamy, K.Cognitive radio (CR) is designed to achieve intelligent spectrum sensing and sharing, in order to solve spectrum underutilization problem. Conventional CR uses multiple/multiport antenna to switch between UWB and narrow band (NB) frequencies for primary and secondary users. In this article, we propose a compact frequency reconfigurable single port antenna using PIN diodes, to switch between UWB and NB frequencies. A circular disc monopole antenna with partial ground plane is designed to deliver UWB response. Three interdigital capacitors (IDC) are electrically connected to a partial ground plane and feed line using PIN diodes. OFF condition of all PIN diodes will provide the UWB response of 2.8 to 10.6 GHz and ON condition of the diodes will result in 36 different NB frequencies, completely covering the UWB spectrum. A simulation study carried out by incorporating a varactor diode into IDC, clearly shows that, the antenna resonance can be switched using PIN diodes and each resonant frequency can be fine-tuned independently, with in the band of interest. This is the unique feature of proposed antenna, which facilitates the technology for CR based internet of things applications in 5G wireless communication networks. © 2020 Wiley Periodicals, Inc.Item Mitigation of mutual coupling in 2 X 2 dual slant polarized MIMO antennas using periodic array of SRRs loaded with transmission line for LTE band 40(John Wiley and Sons Inc, 2020) Bellary, A.; Kandasamy, K.; Rao, P.H.2 X 2 dual slant polarized multiple input multiple output (MIMO) antennas with reduced mutual coupling is presented for polarization and spatial diversity. The design of printed periodic array of split ring resonators (SRRs) loaded with horizontal strip transmission line is proposed to mitigate the mutual coupling among the MIMO antenna elements. An equivalent circuit model, characterizes the effect of coupling between the array of SRRs and the loaded transmission line, which together reduces the near field coupling between the adjacent antenna elements. The additional horizontal strip at the bottom is utilized to seek the return current path to the ground plane. Polarization and spatial diversity is achieved by utilizing dual slant 450 polarized antenna elements with eight independent channels. All four dual polarized antenna elements are designed to operate with a VSWR of <2 for (2.3-2.4 GHz) Band 40. Dual slant 450 polarization is achieved by utilizing two printed planar bow-tie antennas in orthogonal orientation. Measured and simulated results shows by incorporating periodic array of SRRs loaded with transmission line a considerable mutual coupling reduction of 25 to 50 dB is achieved in E-plane, H-plane, and D-plane over the required band 40. An isolation of 30 dB and an average gain of 7.5 dB is measured for dual slant 450 polarized antenna elements. MIMO performance metrics in terms of envelope correlation coefficient and diversity gain are also investigated. © 2020 Wiley Periodicals LLCItem Compact uwb slotted monopole antenna with diplexer for simultaneous microwave energy harvesting and data communication applications(Electromagnetics Academy, 2021) Polaiah, G.; Kandasamy, K.; Kulkarni, M.This paper proposes a new integration of compact ultra-wideband (UWB) slotted monopole antenna with a diplexer and rectifier for simultaneous energy harvesting and data communication applications. The antenna is composed of four symmetrical circularly slotted patches, a feed line, and a ground plane. A slotline open loop resonator based diplexer is implemented to separate the required signal from the antenna without extra matching circuit. A microwave rectifier based on the voltage doubler topology is designed for RF energy harvesting. The prototypes of the proposed antenna, diplexer, and rectifier are fabricated, measured, and compared with the simulation results. The measurement results show that the fractional impedance bandwidth of proposed UWB antenna reaches 149.7% (2.1 GHz–14.6 GHz); the diplexer minimum insertion losses (|S21 |, |S31 |) are 1.37 dB and 1.42 dB at passband frequencies; the output isolation (|S23 |) is better than 30 dB from 1 GHz to 5 GHz; and the peak RF-DC conversion efficiency of the rectifier is 32.8% at an input power of ?5dBm. The overall performance of the antenna with a diplexer and rectifier is also studied, and it is found that the proposed new configuration is suitable for simultaneous microwave energy harvesting and data communication applications. © 2021, Electromagnetics Academy. All rights reserved.Item Compact high-efficiency pentahedron and quatrefoil shape antennas with enhanced gain for GSM1800, 3G, 4G-LTE energy harvesting applications(Cambridge University Press, 2021) Polaiah, G.; Kandasamy, K.; Kulkarni, M.In this paper, three compact, high-efficiency, gain enhanced antennas, and corresponding rectifiers have been proposed for GSM1800, 3G, and 4G-LTE energy harvesting applications. The inverted L-stub is placed on the ground plane of the monopole antenna to get the desired frequency band of GSM1800 MHz. The feed length variation method has been adopted for the slot antennas to obtain the required frequency of 3G and 4G-LTE cellular bands. The performance of antennas is analyzed with the inverted L-stub, feed length variation, and the reflector distance. The maximum gain achieved with the reflector positioned at a distance of ?/4 from the antenna backside is three times greater than the gain obtained without the reflector. The prototype antennas and rectifiers have been simulated, fabricated, measured various parameters, and compared with the simulation results. The antennas provide more than 82% radiation efficiency and an enhanced gain of greater than 5.6 dB. The peak efficiency of rectifiers of more than 30% has been achieved. The aforementioned three antennas are integrated with their corresponding rectifiers for operating at 1.8, 2.1, and 2.3 GHz frequencies. The proposed rectennas are formidably suitable for the reception of RF power from the cellular bands. © © Cambridge University Press and the European Microwave Association 2020.Item Low-profile, wideband dual-polarized 1 × 2 MIMO antenna with FSS decoupling technique(Cambridge University Press, 2022) Bellary, B.; Kandasamy, K.; Rao, P.H.A low-profile, wideband dual-polarized 1 × 2 multiple-input-multiple-output (MIMO) antenna with frequency selective surface (FSS) decoupling technique is presented. Low profile is realized with two different artificial magnetic conductor (AMC) cells out of which one operates at 3.5 GHz and other with dual band at 3.1 and 4.5 GHz. The proposed antenna height is maintained at 0.125λ0 which is significantly reduced when compared with the conventional perfect electric conductor (PEC) ground plane. Wideband dual polarization is enabled by two pairs of bow-Tie antenna elements surrounded by a square ring placed in the orthogonal orientation. To mitigate the near-field coupling in 1 × 2 MIMO an FSS wall is constructed with wide band stop characteristics from 2.85 to 4.75 GHz. Measured results show by inserting FSS wall vertically, coupling reduction is improved by 27 dB over the existing coupling and the antenna exhibits a bandwidth of 57.14% (2.95-4.95 GHz) for VSWR<2 with port isolation of more than 25 dB for entire band of operation. © © The Author(s), 2021. Published by Cambridge University Press in association with the European Microwave Association.Item A Novel Single-Layered Dual-Wideband Circularly Polarized Asymmetric Slot Antenna for Wireless Applications(Electromagnetics Academy, 2024) Shankaraiah, P.H.; Shet, N.S.V.; Kandasamy, K.This work focuses on the design and implementation of a dual-wideband asymmetric square-shaped slot radiator with coplanar waveguide (CPW) feed for circular polarization (CP) characteristics. The proposed radiator has inward ground plane extensions in the form of square and rectangular strips on the diagonal corners of the slot. By optimizing the size of strips, a dual-band antenna with CP behaviour is obtained. The inverted L-shaped grounded strip improves axial ratio bandwidth (ARBW). The extended signal line terminated in a wide tuning stub significantly improves impedance bandwidth (IBW) and also further enhances ARBW. The designed asymmetric slot radiator is fabricated using an FR-4 substrate material of dimensions 50×50×1.6 mm3. This antenna design gives flexibility to alter polarization sense at the dual frequency bands. Further, edge effects are analyzed through electric field distribution, and their impact on impedance and AR characteristics are studied. It is designed, fabricated, and tested, and shows right-hand circular polarization (RHCP) response at 3 GHz and 7.5 GHz in the +Z direction. The experimentally verified results show −10-dB IBWs of 40.12% (range from 2.61 GHz to 3.92 GHz) and 40.21% (range from 6 GHz to 9.02 GHz), and 3-dB ARBWs are 20% (range from 2.70 GHz to 3.30 GHz) and 40.21% (range from 6 GHz to 9.02 GHz) at the resonance bands. The experimentally measured and simulated performance parameters of the prototype are in close agreement. The proposed perturbed slot radiator is well suited for Wi-Fi 6E communication and remote sensing applications. © 2024, Electromagnetics Academy. All rights reserved.Item Graphene-Oxide-Coated Flexible Fabric Antenna Sensor for Contact-Free H2O Sensing(Institute of Electrical and Electronics Engineers Inc., 2024) Singh, V.P.; Kandasamy, K.; Rahman, M.R.This article presents a flexible antenna sensor on denim jeans fabric for H2O sensing. A small defected ground structure is developed on the copper ground plane of the antenna. Graphene oxide (GO) is coated on the defected ground for sensor applications. The flexible antenna sensor with GO coated on a defected ground plane resonates at 5.52 GHz. The resonance frequency of the proposed antenna changes linearly with the H2O content. The frequency sensitivity of the denim fabric antenna sensor is ≈203 MHz/10% relative humidity (RH). The denim fabric antenna sensor has a measured phase sensitivity of 40° per 10% RH. The flexible antenna sensor gives a linearity of 98.28%. The designed antenna sensor can distinguish between fresh and dried grapes by H2O detection. © 2001-2012 IEEE.