Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Polystyrene-halloysite nano tube membranes for water purification(Korean Society of Industrial Engineering Chemistry A-803 Twin Bldg 275-3 Yangjae-Dong Seocho-Kul Seoul 137-130, 2018) Buruga, K.; Kalathi, J.T.; Kim, K.-H.; Ok, Y.S.; Boukhvalov, B.Membrane technologies are a sustainable solution for treatment of water and wastewater. Here, the technical feasibility of polystyrene-halloysite nanotube (PS-HNT) membranes, fabricated by an ultrasound-assisted solution casting method, was explored for water purification. To this end, the effects of various solvents on the structure, morphology, thermal, and mechanical properties of PS-HNT membranes were investigated. Introduction of HNTs (5 wt%) into the polystyrene matrix demonstrated excellent thermal and mechanical properties along with good water flux, rejection of unwanted components, recovery, and regeneration cycles. These membranes were overall useful enough to purify real wastewater collected from pulp and paper mill. © 2017 The Korean Society of Industrial and Engineering ChemistryItem Fabrication of ?-MPS-Modified HNT–PMMA Nanocomposites by Ultrasound-Assisted Miniemulsion Polymerization(Minerals, Metals and Materials Society 184 Thorn Hill Road Warrendale PA 15086, 2018) Buruga, K.; Kalathi, J.T.Halloysite nanotubes (HNTs) were modified with ?-methacryloxypropyltrimethoxysilane (?-MPS) to improve their interaction with the polymer, and the modified HNTs (MHNTs) were subsequently used for the synthesis of MHNT–polymethylmethacrylate (PMMA) nanocomposites by miniemulsion polymerization assisted by ultrasound. Reduced agglomeration of HNTs due to modification with ?-MPS was evident from scanning electron microscopy analysis. Modification of HNTs and exfoliation of MHNTs in the polymer nanocomposite were confirmed by the presence of their respective characteristic peaks in Fourier-transform infrared spectra and x-ray diffraction patterns. Transmission electron microscopic analysis showed that the surface of the MHNTs differed significantly from that of unmodified HNTs. MHNT–PMMA nanocomposite exhibited significantly higher glass-transition temperature (Tg) compared with neat PMMA or unmodified HNT–PMMA nanocomposite. Hence, such modification of HNTs along with miniemulsion polymerization assisted by ultrasound is a promising approach to achieve better dispersion of HNTs in the polymer and to obtain nanocomposites with enhanced properties. © 2018, The Minerals, Metals & Materials Society.Item Synthesis of poly(styrene-co-methyl methacrylate) nanospheres by ultrasound-mediated Pickering nanoemulsion polymerization(Springer Netherlands rbk@louisiana.edu, 2019) Buruga, K.; Kalathi, J.T.Poly (styrene-co-methyl methacrylate) (PS-co-PMMA) nanospheres were synthesized by ultrasound-mediated Pickering nanoemulsion polymerization using halloysite nanotubes (HNTs) as a stabilizer. A relatively high conversion (? 99%) was obtained in a short span of time (60 min) relative to (?97%) for that obtained by conventional emulsion polymerization performed without ultrasound. The initial rate of polymerization and the conversion were found to be increasing with the acoustic intensity in the range of 12.5–25 W/cm2). The synthesized copolymer nanosphere particles exhibited a perfect spherical shape (from TEM analysis), good stability (from zeta-potential analysis), high molecular weight (Mw? 311 kDa from Gel permeation chromatography), and excellent thermal properties (Tg? 120°C from DSC and TGA) as a result of the combined physicochemical effects of acoustic cavitation. The formation of nanosized emulsion droplets stabilized by HNTs ultimately yielded nanospheres of PS-co-PMMA with an average size of ? 82.8 nm. The PS-co-PMMA nanospheres can have potential applications in medicine, dentistry, paper, paint, and automotive industries. © 2019, The Polymer Society, Taipei.Item High-Intensity Ultrasound-Assisted Low-Temperature Formulation of Lanthanum Zirconium Oxide Nanodispersion for Thin-Film Transistors(American Chemical Society service@acs.org, 2020) Pujar, P.; Madaravalli Jagadeeshkumar, K.K.; Naqi, M.; Gandla, S.; Cho, H.W.; Jung, S.H.; Cho, H.K.; Kalathi, J.T.; Kim, S.The process complexity, limited stability, and distinct synthesis and dispersion steps restrict the usage of multicomponent metal oxide nanodispersions in solution-processed electronics. Herein, sonochemistry is employed for the in situ synthesis and formulation of a colloidal nanodispersion of high-permittivity (?) multicomponent lanthanum zirconium oxide (LZO: La2Zr2O7). The continuous propagation of intense ultrasound waves in the aqueous medium allows the generation of oxidant species which, on reaction, form nanofragments of crystalline LZO at ?80 °C. Simultaneously, the presence of acidic byproducts in the vicinity promotes the formulation of a stable as-prepared LZO dispersion. The LZO thin film exhibits a ? of 16, and thin-film transistors (TFTs) based on LZO/indium gallium zinc oxide operate at low input voltages (?4 V), with the maximum mobility (?) and on/off ratio (Ion/Ioff) of 5.45 ± 0.06 cm2 V-1 s-1 and ?105, respectively. TFTs based on the compound dielectric LZO/Al2O3 present a marginal reduction in leakage current, along with enhancement in ? (6.16 ± 0.04 cm2 V-1 s-1) and Ion/Ioff (?105). Additionally, a 3 × 3 array of the proposed TFTs exhibits appreciable performance, with a ? of 3-6 cm2 V-1 s-1, a threshold voltage of -0.5 to 0.8 V, a subthreshold swing of 0.3-0.6 V dec-1, and an Ion/Ioff of 1-2.5 (×106). © © 2020 American Chemical Society.