Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item PMMA-LZO Composite Dielectric Film with an Improved Energy Storage Density(Springer New York LLC barbara.b.bertram@gsk.com, 2019) Kishor Kumar, M.J.; Kalathi, J.T.Energy storage materials in modern electronic devices and renewable energy systems are inevitable. The incorporation of inorganic fillers into the polymer matrix is a promising option for the advancement of storage materials with high energy density. The agglomeration of inorganic fillers in the polymer matrix and phase separation remain the main obstacles to efficient applications of the composites for energy storage. Here, the primary attention was given to achieve a uniform distribution of high-k LZO (Lanthanum Zirconium Oxide) filler into a PMMA (Polymethylmethacrylate) matrix to enhance the dielectric constant and energy storage density of PMMA while keeping dielectric loss at minimum. We prepared PMMA-LZO composite films with variable LZO content by ultrasound-assisted mixing followed by spin coating the solution on ITO (Indium tin oxide) coated glass. The effect of LZO content on dielectric properties of the LZO-PMMA films was studied. Dielectric constant (k) of PMMA was found to be increased from 3.1 to 15.3 at 15 vol.% LZO loading with a dielectric loss of 0.0582. However, 10 vol.% LZO loaded PMMA showed an improved dielectric constant of 13.4 while the dielectric loss remained the same as that of the neat PMMA. The LZO-PMMA films with 10 vol.% and 15 vol.% of LZO loading exhibited maximum energy density of 5.94 J cm?3 and 6.53 J cm?3, respectively. Overall, the 10 vol.% LZO loading was found to be optimum to achieve a stable film with improved dielectric properties. This work provides a viable approach for the development of flexible, high-energy density materials with a minimum dielectric loss. © 2019, The Minerals, Metals & Materials Society.Item Investigation on the dielectric performance of PVDF-HFP/LZO composites(Elsevier Ltd, 2020) M J, K.K.; Kalathi, J.T.The energy storage density of the film capacitor is crucial for optoelectronic devices. Among various dielectrics, polyvinylidene-fluoride-co-hexafluoropropylene (PVDF-HFP) copolymer is widely preferred due to its inherent high dielectric constant and breakdown strength. However, the low energy storage density and high dielectric loss (tan ?) of PVDF-HFP remains challenging in the present scenario. In this work, we demonstrated how to improve the dielectric constant and energy density of PVDF-HFP with low dielectric losses by formulating PVDF-HFP/Lanthanum Zirconium Oxide (LZO) composite ink at low temperature. We performed the computational modeling of the thin-film capacitor, consisting of PVDF-HFP/LZO as a dielectric layer, to find the optimum LZO content for achieving a high energy density. A computational model of the film capacitor and dielectric shielding was built with PVDF-HFP/LZO composites having a different LZO content to understand its effect on the electric field distribution, polarization, and energy storage density. We compared the dielectric properties of the PVDF-HFP/LZO thin-film capacitor predicted by simulations with the experimental values measured by impedance analysis. The optimum LZO content in PVDF-HFP was determined as 15 vol% to achieve a high energy storage density of 15.8 J/cm3 at 545 MV/m breakdown strength with low dielectric losses. Dielectric constant and energy storage density of the PVDF-HFP/LZO15 composite film were nearly doubled compared to that of neat PVDF-HFP by keeping dielectric losses low. © 2020 Elsevier B.V.