Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Influence of additives on the synthesis of carbonyl iron suspension on rheological and sedimentation properties of magnetorheological (MR) fluids(Institute of Physics Publishing helen.craven@iop.org, 2019) Aruna, M.N.; Rahman, M.R.; Joladarashi, S.; Kumar, H.Magnetorheological (MR) fluid is one of the major constituent element in structural suspensions and damping characteristic in automobile applications. The major drawback is sedimentation in MR fluids, in the present study an attempt has been done to address the sedimentation issue. The synthesis and characterization of MR fluid in combination with clay and additives leads to improvement in sedimentation rate. The four different types of MR fluid were prepared in combination with clay, friction reducing agent and poly-alpha-olefin (PAO) oil naming as MRFp-1, 2, 3 and 4 as tabulated in table 1. The cost effective MRFp-3 shows better result compared to commercially available MR fluid with respect to off/on state shear stress, viscosity. It is also observed that in-house prepared MRFp-3 has better sedimentation than commercially available (LORD-132DG) up to 700 h. © 2019 IOP Publishing Ltd.Item Investigation of sedimentation, rheological, and damping force characteristics of carbonyl iron magnetorheological fluid with/without additives(Springer, 2020) Aruna, M.N.; Rahman, M.R.; Joladarashi, S.; Kumar, H.In the present study, the magnetorheological fluid (MRF) samples are prepared using pure carbonyl iron particles (CIPs), CIPs/Claytone APA/Molyvan 855 additive, and friction reducer dispersed in poly-alpha-olefin oil. The scanning electron microscopy reveals that the Claytone additive morphology looks like a surface abundant in small folds, which connect the gaps between the spherical pure CIPs and prevent sedimentation in the MRF. The magnetic saturation properties are investigated through the vibrating sample magnetometer. The pure CIPs MRF shows (Ms) value as 146.12 emu/g, and the CIPs/Claytone APA/Molyvan indicates (Ms) as 55.12 emu/g. The magnetorheological flow curves, such as shear stress and viscosity as a function of shear rate, are investigated for the MRF samples through the magnetorheometer. The sedimentation analysis of the MRF is observed by visual inspection and shows that the CIPs/Claytone APA/Molyvan improved the sedimentation rate than the pure CIPs MRF. Finally, the experimental characterization of the prototype monotube MR damper is carried out using the hydraulic dynamic testing machine at 1.5 Hz frequency for damper peak–peak displacement length of ± 5 mm at three intervals of 0 h, 24 h, and 72 h in damper to know the effect on damping force for the prepared MRF samples against the sedimentation rate. © 2020, The Brazilian Society of Mechanical Sciences and Engineering.Item Synthesis of magnetorheological fluid and its application in a twin-tube valve mode automotive damper(SAGE Publications Ltd info@sagepub.co.uk, 2020) Madhavrao Desai, R.; Acharya, S.; Jamadar, M.-E.-H.; Kumar, H.; Joladarashi, S.; Sekaran, S.C.R.The change in rheological properties of smart materials like magnetorheological fluid when brought under the influence of a magnetic field can be utilized to develop magnetorheological devices where the output has to be continuously and quickly varied using electronic control interface. In the present study, magnetorheological fluid is synthesized and used as a smart fluid in a twin-tube magnetorheological damper operating in valve mode. The behavior of the magnetorheological fluid is experimentally characterized in a rheometer and mathematically modeled using Herschel–Bulkley model. The parameters of the Herschel–Bulkley model are expressed as polynomial functions of strength of the magnetic field in order to find the shear stress developed by the magnetorheological fluid at any given strength of the magnetic field applied. The magnetorheological damper, which was designed for application in a passenger van, is tested in the damper testing machine. The performance of the damper at different damper velocities and current supplied is studied. The range of values for the parameters of the experimental testing are chosen to emulate the actual conditions of operation in its intended application. Nondimensional analysis is performed, which links magnetorheological fluid rheological properties and geometrical parameters of magnetorheological damper design with the force developed by the damper. Finite element method magnetics is used to find the strength of the magnetic field at the fluid flow gap. Analytical methods are used to calculate the damper force developed due to the field-dependent yield stress and compared with experimental force values. The resulting dynamic range of the magnetorheological damper is also assessed. © The Author(s) 2020.Item Influence of different fumed silica as thixotropic additive on carbonyl particles magnetorheological fluids for sedimentation effects(Elsevier B.V., 2021) Aruna, M.N.; Rahman, M.R.; Joladarashi, S.; Kumar, H.; Bhat Panemangalore, D.B.The present work reports the influence of different types of surface area, hydrophobic, and hydrophilic fumed silica mixed in silicone oil as a thixotropic additive on carbonyl particles based magnetorheological fluids (MRFs) were prepared. Scanning electron microscopy analysis confirms the fumed silica particles attached to the surfaces of CIPs. The vibrating sample magnetometer result shows the MRF4 and 5 have a better magnetic saturation value of 30.12 emu/gm and 40.12 emu/gm, respectively. The experimental rheological flow curve behaviours are investigated using the magnetorheometer. The Herschel–Bulkley rheological model is found to be in good agreement with the experimental curves and suggested shear thinning property is observed. The results showed that the hydrophilic silica with larger surface area type presented (i.e.MRF 4 and 5) better magnetorheological fluid characteristics in terms of shear stress, with a high value of dynamic yield stress, and have much-improved sedimentation ratio up to seven days. © 2021 Elsevier B.V.Item A study on magnetorheological and sedimentation properties of soft magnetic Fe58Ni42 particles(Elsevier B.V., 2022) Aruna, M.N.; Rahman, M.R.; Joladarashi, S.; Kumara, H.; Meena, S.S.; Sarkar, D.; Umesh, C.K.In this study, the samples with two volume fractions (ϕ) of Fe58Ni42 (permalloy) i.e. (ϕ1 = 25 and ϕ2 = 30 %) were used as magnetic particles, silicone oil as a carrier fluid, and aluminium disterate as an additive. As received Fe58Ni42 particles surface morphology and composition of the Fe58Ni42 were investigated using field emission scanning electron microscopy (FESEM) coupled with energy dispersive spectroscopy (EDS), respectively. The X-ray Diffraction (XRD) structural information analysis confirmed Fe58Ni42 particles have a face-centered cubic phase, corresponding with the result of the high resolution transmission electron microscopy (HRTEM) characterization technique. The magnetorheological properties were tested via rotational rheometer at four different magnetic field strengths. The results show that sample PMRF-30 has a maximum shear stress, shear viscosity, and dynamic modulus greater than the PMRF-25 sample. In addition, experimental shear stress flow curves are well fitted with Herschel-Bulkley rather than Bingham and Casson rheological models. The permalloy based magnetorheological fluid (PMRF) samples were prepared with a 25 % volume fraction and a 30 % volume fraction of permalloy particles with a sample abbreviation of PMRF-25 and PMRF-30, respectively. Furthermore, the sedimentation stability of suspensions of both the samples was observed using visual inspection. This method result shows the sedimentation ratio with respect to time of 72 h was 31 % and 29 %, respectively. © 2022 Elsevier B.V.