Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Development of Sustainable Jute/Epoxy Composite and Assessing the Effect of Rubber Crumb on Low Velocity Impact Response(Taylor and Francis Ltd., 2022) Mahesh, V.; Mahesh, V.; Harursampath, D.; Joladarashi, S.; Kulkarni, S.M.In the current study, the experimental assessment of influence of rubber crumb on the low velocity impact (LVI) behavior of jute epoxy composites are carried out using two types of impactors namely hemispherical and conical. Hand layup technique is used to fabricate the proposed composites. The rubber crumb is incorporated in the epoxy resin with 1.5 wt%, 3 wt%, and 5 wt%. Results revealed that incorporation of 3 wt% of rubber crumb resulted in better LVI response compared to its counterparts. Fractography studies revealed that inclusion of rubber crumb particles enhances the adhesion between resin and fiber, thereby increasing the energy absorption. In addition, they aid in reducing damage area and increasing penetration threshold of proposed composites. The current study’s systematic technique serves as a model for the efficient use and conversion of waste rubber crumb into usable natural fiber reinforced polymer matrix composites for LVI applications. © 2022 Taylor & Francis.Item Comparative study on low velocity impact behavior of natural hybrid and non hybrid flexible thermoplastic based composites(SAGE Publications Ltd, 2023) Kumbhare, K.; Mahesh, V.; Joladarashi, S.; Kulkarni, S.M.The current study attempts to evaluate the low-velocity impact (LVI) behavior of jute and banana fiber-based hybrid and non hybrid green composites. The proposed composites are fabricated using compression moulding method with variety of positioning of layers namely jute-rubber-jute-rubber-jute (JRJRJ), banana-rubber-banana-rubber-banana (BRBRB), jute-rubber-banana-rubber-jute (JRBRJ) and banana-rubber-jute-rubber-banana (BRJRB). Thus developed composites are subjected to LVI testing using conical and hemispherical shaped impactor in drop weight impact testing machine and different impact velocities of 5 m/s, 10 m/s and 15 m/s. Based on the ability of the proposed composites to absorb energy, coefficient of restitution (CoR), energy loss percentage (ELP), and failure behaviour, the suggested flexible composites’ performances are assessed. The study reveals that JRJRJ composite exhibits better energy absorption capability and BRBRB exhibits least energy absorption capability compared to its counterparts. The damage study reveals that hemispherical impactor leads to more damage area due to its larger contact area whereas, conical impactor results in local penetration. Results reveals that inclusion of jute fiber as reinforcement results in better LVI properties compared to banana fiber. It is also clear that the presence of a compliant matrix improves energy absorption and damage resistance in flexible composites. © The Author(s) 2022.Item Elevated temperature tribological performance of non-equiatomic CoCrNiTiWx high entropy alloy coatings developed by mechanical alloying and high-velocity oxy-fuel spray(Elsevier B.V., 2024) Addepalli, S.N.; Joladarashi, S.; Ramesh, M.R.High entropy alloys (HEA) have applications in multiple fields owing to their exceptional mechanical and physical properties. In the current study, mechanical alloyed CoCrNiTiWx (x; a molar fraction, x = 0.5 and 1.5) HEA feedstock powders were deposited on maraging steel substrate using high-velocity oxy-fuel spray (HVOF). The phase evolution and the microstructure of the milled powders and as-sprayed coatings were analysed by X-ray diffraction (XRD) and scanning electron microscope (SEM). The tribological behaviour of CoCrNiTiW0.5 and CoCrNiTiW1.5 HEA coatings at elevated temperatures was studied extensively using a Pin-on-Disc tribometer. The CoCrNiTiW0.5 and CoCrNiTiW1.5 HEA coatings retained the BCC solid solution phases formed during the milling stage. However, additional oxide and intermetallic phases were formed owing to the in-flight oxidation and high temperatures experienced during the HVOF deposition. The deposited coatings exhibited a lamellar structure and good mechanical bonding with the substrate. The porosities of CoCrNiTiW0.5 and CoCrNiTiW1.5 HEA coatings were found to be 1.69 ± 0.32 % and 1.51 ± 0.37 % respectively.Consequently, the CoCrNiTiW0.5 and CoCrNiTiW1.5 HEA coatings displayed average microhardness values of 863 ± 52 HV0.3 and 1025 ± 39 HV0.3, respectively. Further, the wear rates of coatings exhibited a significant reduction at elevated temperatures, owing to the formation of TiO2, NiCr2O4 oxide tribofilms for CoCrNiTiW0.5, and CoCr2O4, NiWO4, WO3 oxides for CoCrNiTiW1.5. The specific wear rate of CoCrNiTiW0.5 HEA coating dropped by 73.6 % from 22.7 ± 2.6 × 10−6 mm3/N-m to 5.99 ± 1.9 × 10−6 mm3/N-m, while CoCrNiTiW1.5 dropped by 78.8 % from 11.86 ± 3.5 × 10−6 mm3/N-m to 2.51 ± 1.5 × 10−6 mm3/N-m, with a rise in the temperature from RT to 600 °C. Likewise, The frictional coefficients of CoCrNiTiW0.5 HEA dropped from 0.504 ± 0.015 to 0.397 ± 0.005, while CoCrNiTiW1.5 HEA dropped from 0.578 ± 0.025 to 0.471 ± 0.004, with a rise in temperature from RT to 600 °C. At room temperature, the wear mechanisms of the as-sprayed CoCrNiTiWx coatings were dominated by adhesive wear. However, at elevated temperatures, a shift towards oxidative wear was observed. © 2023 Elsevier B.V.