Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Influence of redmud on the mechanical, damping and chemical resistance properties of banana/polyester hybrid composites(Elsevier Ltd, 2014) Veerasimman, V.; Marimuthu, M.; Manikandan, V.; Nagarajan, N.; Jeyaraj, P.A novel hybrid composite was developed with the addition of redmud as secondary reinforcing filler with banana fiber reinforced polyester composites (BFRPCs). The effect of varying parameters such as particle size (4, 6 and 13. ?m) and weight percentage (2, 4, 6, 8 and 10. wt%) of redmud were analyzed on static mechanical, free vibration and chemical resistance properties of hybrid composites. The addition of redmud shown enhanced performance compared to the virgin BFRPCs in all the above said properties. The maximum increase of 50% in mechanical strength was observed for the BFRPCs with the addition of redmud having 4. ?m particle size and 8. wt% of filler content compared to pure BFRPCs. The increased value of fundamental natural frequencies with associated modal damping characteristics of redmud filled BFRPCs were found using half-power band width method. All the fabricated composites performed well against various chemicals and it indicates that the resistance to the weight loss is due to the uniformly distributed redmud. To study the effect of redmud on interfacial bonding between the banana fiber and polyester matrix the Scanning Electron Microscope (SEM) image analysis was performed. © 2014 Elsevier Ltd.Item Dynamic mechanical analysis and free vibration behavior of intra-ply woven natural fiber hybrid polymer composite(SAGE Publications Ltd info@sagepub.co.uk, 2016) RAJESH, M.; Jeyaraj, P.Influence of nature of weaving pattern and intra-ply hybridization of natural fibers on dynamic mechanical and free vibration characteristics of woven banana/jute polyester composite has been investigated. Results revealed that basket-type composite has better dynamic properties due to uniform stress distribution in both warp and weft directions. Warp jute fiber and weft banana fiber (WJWB) and both warp and weft banana and jute fiber (WAWBJ) intra-ply hybrid composites have better dynamic mechanical behavior as relatively stronger fiber is oriented along the loading direction. Experimental modal analysis carried out on beam-like samples revealed that warp and weft banana and jute fiber intra-ply hybrid composite has better natural frequencies while huckaback woven and warp banana fiber and weft jute fiber composites have better modal damping factors. © The Author(s) 2015.Item Influence of nature of core on vibro acoustic behavior of sandwich aerospace structures(Elsevier Masson SAS 62 rue Camille Desmoulins Issy les Moulineaux Cedex 92442, 2016) Arunkumar, M.P.; Jeyaraj, P.; Gangadharan, K.V.; Mailan Chinnapandi, M.C.This paper presents the study of influence of core geometry on vibration and acoustic response characteristics of sandwich panels which are used as aerospace structures. Sandwich panels considered in this research work are: (a) Honeycomb core, (b) Truss and Z core, (c) Foam core. The present study has found that (i) For a honeycomb core sandwich panel in due consideration to space constraint, the better acoustic comfort can be achieved by reducing the core height and increasing the face sheet thickness. (ii) It is demonstrated that, for a honeycomb core sandwich panel, vibration and acoustic response is not sensitive to the cell size. (iii) It is observed that, triangular core gives better acoustic comfort for the truss core sandwich panel compared to other type of core. (iv) For foam core sandwich panels, it is observed that sandwich panel with carbon-epoxy (high stiffness) face sheet radiates less sound in the lower frequency range (0–100 Hz). While the sandwich panel with Titanium (high density) face sheet radiates less sound at the higher frequencies. In order to reduce the preprocessing time and computational effort throughout the analysis in the present study, equivalent 2D elastic properties are calculated and used to find out the vibration and acoustic response characteristics. © 2016 Elsevier Masson SASItem Mechanical characterization of natural fiber intra-ply fabric polymer composites: Influence of chemical modifications(SAGE Publications Ltd info@sagepub.co.uk, 2017) RAJESH, M.; Jeyaraj, P.The influence of surface treatment (alkali, potassium permanganate, benzoyl chloride and silane) on the mechanical, dynamic mechanical and free vibration properties of intra-ply hybrid banana/jute woven fabric composite has been analyzed. Intra-ply woven fabrics are fabricated by keeping banana yarn in weft direction and jute yarn in warp direction of a basket-type woven fabric. Results reveal that the enhancement of tensile and flexural strengths of the composite due to the chemical treatment is marginal, except for the benzoyl chloride treatment. However, the chemical treatment results in better impact strength compared to the untreated composite. Tensile, flexural and impact strengths of the benzoyl chloride treatment increase by 10%, 30% and 50%, respectively, compared to untreated composite. It is evident from Fourier Transform-Infrared Spectra that benzoyl chloride treatment effectively removes the hemicellulose and lignin content. It is observed that benzoyl chloride and alkali treatment improves the dynamic mechanical characteristics. Experimental modal analysis carried out on intra-ply fabric composites reveals that benzoyl chloride treatment increases the natural frequency significantly compared to the untreated composite. © 2017, © The Author(s) 2017.Item Mechanical behavior of woven natural fiber fabric composites: Effect of weaving architecture, intra-ply hybridization and stacking sequence of fabrics(SAGE Publications Ltd info@sagepub.co.uk, 2018) RAJESH, M.; Singh, S.P.; Jeyaraj, P.A comprehensive analysis carried out on the mechanical and free vibration properties of woven natural fiber polymer composites is presented. Jute fabric with three different weave types (plain, basket and herringbone) and intra-ply woven jute-banana fabrics are considered for investigation of the effect of weave type of a fabric and its stacking sequence on mechanical, dynamic mechanical and free vibration properties. Enhancement of the properties is found with the number of layers of fabric and better properties obtained for four layers. Uniform stress distribution along warp and weft direction of fabric with basket weave type lead to better properties compared to other weave types for four-layered composites. Intra-ply hybridization of jute-banana also enhances the mechanical properties but slightly less than the jute-basket fabric composite. The investigations on effect of layer sequence of fabrics revealed improvement in mechanical properties. Layered composite with relatively strong intra-ply fabric as the facing layer and relatively weak jute plain fabrics as the core layer has higher tensile and flexural properties. Experimental modal analysis carried out on beam-like composite laminates reveal that natural frequencies and associated modal damping factor are significantly influenced by stacking sequence and weave type of a fabric. The density of the composite calculated based on Archimedes principle matches well with the theoretical values. © 2016, © The Author(s) 2016.