Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Jeyaraj, J.Subject: search.filters.subject.Vibrations (mechanical)

Search Results

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    Vibration analysis of a tapered laminated thick composite plate with ply drop-offs
    (Springer Verlag service@springer.de, 2015) Edwin Sudhagar, P.; Arumugam, A.; Vasudevan, R.; Jeyaraj, J.
    In this study, vibration characteristics of a tapered laminated thick composite plate have been investigated using finite element method by including the shear deformation and rotary inertia effects. The governing differential equations of motion of a tapered laminated thick composite plate are presented in the finite element formulation based on first-order shear deformation theory for three types of taper configurations. The effectiveness of the developed finite element formulation in identifying the various dynamic properties of a tapered laminated thick composite plate is demonstrated by comparing natural frequencies evaluated using the present FEM with those obtained from the experimental measurements and presented in the available literature. Various parametric studies are also performed to investigate the effect of taper configurations, aspect ratio, taper angle, angle ply orientation and boundary conditions on free and forced vibration responses of the structures. The comparison of the transverse free vibration mode shapes of the uniform and tapered composite plates under various boundary conditions is also presented. The forced vibration response of a composite plate is investigated to study the dynamic response of tapered composite plate under the harmonic force excitation in various tapered configurations. It is concluded that the dynamic properties of laminated thick composite plates could be tailored by dropping off the plies to yield various tapered composite plate. © 2015, Springer-Verlag Berlin Heidelberg.
  • No Thumbnail Available
    Item
    Mechanical and dynamic mechanical behaviour of novel glass–natural fibre intra-ply woven polyester composites
    (Springer India sanjiv.goswami@springer.co.in, 2017) RAJESH, M.; Jeyaraj, J.
    A novel intra-ply woven fabric polyester composite with glass fibre yarns in one direction and natural fibre yarns in another direction of basket-type woven fabric has been investigated for mechanical and dynamic mechanical characteristics. Individual glass fibre woven fabric, natural fibres woven fabric and intra-ply natural fibres woven fabric composites are also investigated for the comparison purpose. Results reveal that the intra-ply woven fabric hybridization enhances impact and damping properties of the composite significantly than the tensile and flexural properties. Intra-ply woven fabrics with glass fibre yarns in warp direction and jute fibre yarns in weft direction (WGWJ) exhibit better impact properties compared with woven fabric with other combinations. Dynamic mechanical analysis results reveal that intra-ply woven fabric composite with glass fibre yarns in warp direction and jute and banana fibre yarns in weft direction (WGWJAB) gives higher damping characteristics due to the multi-level interaction between fibre–fibre and fibre–matrix interactions. © 2017, Indian Academy of Sciences.
  • No Thumbnail Available
    Item
    Dynamic behavior of concurrently printed functionally graded closed cell foams
    (Elsevier Ltd, 2021) Dileep, B.; Prakash, R.; Bharath, H.S.; Jeyaraj, J.; Doddamani, M.
    In this work, functionally graded foams (FGFs) of closed cell types are three-dimensionally printed (3DP) concurrently. These closed cell syntactic foams are manufactured by reinforcing 20, 40, and 60 vol% hollow glass microballoons (GMBs) in the high density polyethylene (HDPE) matrix and are investigated for their mechanical buckling and free vibration response. The critical buckling load (Pcr) of the FGFs are evaluated using the Double Tangent Method (DTM), Modified Budiansky Criteria (MBC), and Vibration Correlation Technique (VCT). It is observed that Pcr evaluated by all three methods are in good agreement. Among all FGFs, FGF-2 exhibited higher buckling strength with 22–26% higher than FGF-1 and FGF-3. Under no-load and uniaxial compressive loads, the first three natural frequency of FGFs and their corresponding damping factors are evaluated. At first mode, the natural frequency of FGFs decreases in the pre-buckling zone and started increasing in the post-buckling zone. Damping factor exhibited reverse trend compared to the trend shown by the natural frequencies. Among all FGFs, FGF-2 (20-40-60 GMB gradation) exhibited better natural frequency. Experimental results are compared with a finite element based simulation results. © 2021 Elsevier Ltd
  • No Thumbnail Available
    Item
    Thermal buckling and vibro-acoustic behaviour of functionally graded graphene polymer layered composites subjected to in-plane temperature variance
    (SAGE Publications Ltd, 2022) John, B.O.; Hassan, F.U.; George, N.; Chacko, T.; Bhagat, V.S.; Jeyaraj, J.; Kiran Kumar Reddy, R.
    The current study reports the thermal buckling, vibration and acoustic characteristics of functionally graded graphene polymer layer composite plates subjected to the in-plane temperature variance. The macroscopic properties of the composites are evaluated using the modified rule of mixtures to compute the layer-wise properties of an functionally graded graphene polymer layer composite plate. The critical buckling temperature is computed and compared for various functional gradings, boundary conditions and in-plane temperature variances. The in-plane temperature variance showed a major impact on the critical thermal buckling temperature and respective mode shapes. The vibro-acoustic behaviour of the functionally graded graphene polymer layer composite plate is investigated and documented keeping critical buckling temperature as a function. With an increase in thermal load and the nature of in-plane temperature variance, the vibro-acoustic results showed significant difference in velocity and acoustic response. For functionally graded graphene polymer layer composite plate with one free edge, the difference was statistically significant as indicated by an octave band plot. We conclude that the portion of the functionally graded graphene polymer layer composite plate that is subjected to the higher temperature in an in-plane temperature variance, as well as the nature of the boundary conditions may exacerbate the effect of in-plane temperature variance and are crucial in predicting vibro-acoustic characteristics. © IMechE 2022.
  • No Thumbnail Available
    Item
    Vibro-acoustics of functionally graded porous beams subjected to thermo-mechanical loads
    (Techno-Press, 2022) Mailan Chinnapandi, M.C.L.; Jeyaraj, J.; Eltaher, M.A.
    This manuscript work presents a comprehensive continuum model capable to investigate the effect of porosity on vibro-acoustic behaviour of functionally graded (FG) beams resting on an elastic foundation subjected to thermal and mechanical loadings. Effects of uniform temperature rise and edge compressive load on the sound radiation characteristics are studied in a comparative manner. The numerical analysis is carried out by combining finite element method with Rayleigh’s integral. Detailed parametric studies are accomplished, and influences of power law index, porosity volume, porosity distribution and boundary conditions on the vibro-acoustic response characteristics are analyzed. It is found that the vibroacoustic response under mechanical edge compression is entirely different compared to from that under the thermal load. Furthermore, nature of grading of porosity affects the sound radiation behaviour for both the loads. The proposed model can be used to obtain the suppression performance of vibration and noise FG porous beams under thermal and mechanical loads. © © 2022 Techno-Press, Ltd.