Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Sound radiation and transmission loss characteristics of a honeycomb sandwich panel with composite facings: Effect of inherent material damping(Academic Press, 2016) Arunkumar, M.P.; Jagadeesh, M.; Jeyaraj, J.; Gangadharan, K.V.; Mailan Chinnapandi, M.C.L.This paper presents the results of numerical studies carried out on vibro-acoustic and sound transmission loss behaviour of aluminium honeycomb core sandwich panel with fibre reinforced plastic (FRP) facings. Layered structural shell element with equivalent orthotropic elastic properties of core and orthotropic properties of FRP facing layer is used to predict the free and forced vibration characteristics. Followed by this, acoustic response and transmission loss characteristics are obtained using Rayleigh integral. Vibration and acoustic characteristics of FRP sandwich panels are compared with aluminium sandwich panels. The result reveals that FRP panel has better vibro-acoustic and transmission loss characteristics due to high stiffness and inherent material damping associated with them. Resonant amplitudes of the response are fully controlled by modal damping factors calculated based on modal strain energy. It is also demonstrated that FRP panel can be used to replace the aluminium panel without losing acoustic comfort with nearly 40 percent weight reduction. © 2016 Elsevier LtdItem Fabrication and mechanical properties of braided flax fabric polylactic acid bio-composites(Taylor and Francis Ltd., 2022) Kanakannavar, S.; Jeyaraj, J.This paper primarily describes the development of flax braided yarn fabric reinforced thermoplastic composites. Plain woven fabric is made by interlacing 3D braided yarn produced by solid braiding method. Tensile properties of braided yarn and woven fabric are evaluated. Solution casting is used prior to composite fabrication to prepare polylactic acid (PLA) and (natural fiber braided fabric) NFBF–PLA sheets. Followed by this, composite laminates are prepared using through film stacking and compression molding. Influence of number of layers of fabric and loading along warp and weft directions on mechanical properties such as tensile, flexural and impact properties are presented. It is observed that the reinforcement enhances the tensile, flexural and impact properties of the composite significantly for the warp loading. Results also clearly indicates that braided yarn fabric reinforcement have the potential for significant improvement of mechanical and thermal properties of PLA composites. © 2021 The Textile Institute.Item A semi-analytical nonlocal elasticity model for static stability and vibration behaviour of agglomerated CNTs reinforced nano cylindrical panel under non-uniform edge loads(Elsevier Inc., 2022) Twinkle, C.M.; Jeyaraj, J.A semi analytical nonlocal elasticity model to analyze the effect of non-uniform edge loads on static stability and free vibration characteristics of agglomerated carbon nanotubes (CNTs) reinforced nano cylindrical panels are presented. Effective material properties of the agglomerated CNT reinforced composite are obtained using a two-parameter micro-mechanics model while Eringen's non-local theory is used to account the size effect. Sinusoidal shear deformation theory is adopted to analyze the buckling and vibration parameters using Galerkin's approach. The accuracy of the proposed model is presented first by comparing the results in the literature. Then a comprehensive study is carried out to analyze the influence of various degrees of agglomeration (complete, partial), nature of edge load, and non-local effects on the buckling and free vibration response of CNT reinforced nano cylindrical panel. The results revealed that non-local size effect leads to a reduction in stiffness and thus reduces buckling and dynamic characteristics. Moreover, it is observed that critical buckling load varies with type of in plane load and reduction in natural frequency is different for different in plane loading conditions. © 2021 Elsevier Inc.Item Structural-Acoustic Response Analysis of Variable Stiffness Laminates with Inherent Material Damping(World Scientific, 2022) Gunasekaran, V.; Gulhane, S.; Gupta, S.; Jeyaraj, J.; Vasudevan, V.; Manickam, G.Sound radiation and transmission loss characteristics of variable stiffness composite plate reinforced with the curvilinear fibers are investigated numerically. The formulation is developed using higher-order shear flexible finite element model combined with Helmholtz wave equation. The governing equations obtained using Hamilton's approach are further solved through the modal super position method to analyze the vibration response under steady state excitation. The inherent material damping of the laminate is accounted through the modal damping calculated using the modal strain energy approach. The acoustic pressure of the variable stiffness laminates is estimated using the Raleigh integral. Subsequently, acoustic response characteristics such as acoustic power level, radiation efficiency, directivity pattern, and transmission loss from the laminates are predicted using the estimated sound pressure for various forcing frequencies. A parametric study covering a wide range of design variables including center and edge fiber angles, lamination scheme, thickness ratio, and boundary conditions on the acoustic sound behavior arising from the vibration of curvilinear fiber composite plate is detailed. This study reveals that the acoustic response of the curvilinear fiber composite plate is significantly influenced by the curvilinear fiber angles at the center/edge fiber angle of the layers. It is hoped that the results obtained here will be useful for designers in developing structures with desired acoustic response characteristics. © 2022 World Scientific Publishing Company.