Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
12 results
Search Results
Item Free vibration and stability of graphene platelet reinforced porous nano-composite cylindrical panel: Influence of grading, porosity and non-uniform edge loads(Elsevier Ltd, 2021) Twinkle, T.; Jeyaraj, J.Buckling and vibration characteristics of functionally graded(FG) porous(P), graphene platelet (GPL) reinforced cylindrical panel are presented. A multilayer model is considered for analysis with graphene and internal pores distribution varying in an uniformly or two different non-uniformly manner along the thickness. To evaluate the effective mechanical properties, extended rule of mixture together with modified Halpin-Tsai micromechanics model and mechanical properties of open-cell metal foams is used. Considering a higher order shear deformation theory, characteristics of the FG-P-GPL reinforced cylindrical panel under different edge loads such as uniform, triangular, trapezoidal and parabolic are investigated. The Hamilton's principle is used to formulate the governing partial differential equations and buckling and free vibration solutions are obtained by employing the Galerkins method. The influences of grading of GPL and internal pores, porosity coefficient on buckling and dynamic characteristics of functionally graded GPL reinforced porous cylindrical panel under uniform and non-uniform in-plane loads are presented. © 2020 Elsevier LtdItem Acoustic radiation and transmission loss of FG-Graphene composite plate under nonuniform edge loading(Elsevier Ltd, 2021) Gunasekaran, V.; Jeyaraj, J.; Mailan Chinnapandi, L.B.The influence of nonuniform edge loads on the acoustic response of a functionally graded graphene reinforced composite plate is investigated analytically. The energy method is implemented to calculate the buckling load (Pcr). An analytical method based on Reddy's third-order shear deformation theorem is used to obtain the vibration response, and acoustic response is obtained using Rayleigh Integral. The nature of edge load variation on buckling and vibro-acoustic response is significant. Free vibration mode shape changes with an increase in edge load and consequently affects the resonant amplitude of responses also especially for the plates with a higher aspect ratio. Volume fraction and dispersion pattern of graphene nano-platelets also influences the resonance amplitudes. Plate with FG?GRCC dispersion pattern has improved buckling and vibro-acoustic response behavior. Similarly, change in sound transmission loss level is significant in the stiffness region compared to the damping and mass dominated region. © 2021 Elsevier Masson SASItem Dynamic behavior of concurrently printed functionally graded closed cell foams(Elsevier Ltd, 2021) Dileep, B.; Prakash, R.; Bharath, H.S.; Jeyaraj, J.; Doddamani, M.In this work, functionally graded foams (FGFs) of closed cell types are three-dimensionally printed (3DP) concurrently. These closed cell syntactic foams are manufactured by reinforcing 20, 40, and 60 vol% hollow glass microballoons (GMBs) in the high density polyethylene (HDPE) matrix and are investigated for their mechanical buckling and free vibration response. The critical buckling load (Pcr) of the FGFs are evaluated using the Double Tangent Method (DTM), Modified Budiansky Criteria (MBC), and Vibration Correlation Technique (VCT). It is observed that Pcr evaluated by all three methods are in good agreement. Among all FGFs, FGF-2 exhibited higher buckling strength with 22–26% higher than FGF-1 and FGF-3. Under no-load and uniaxial compressive loads, the first three natural frequency of FGFs and their corresponding damping factors are evaluated. At first mode, the natural frequency of FGFs decreases in the pre-buckling zone and started increasing in the post-buckling zone. Damping factor exhibited reverse trend compared to the trend shown by the natural frequencies. Among all FGFs, FGF-2 (20-40-60 GMB gradation) exhibited better natural frequency. Experimental results are compared with a finite element based simulation results. © 2021 Elsevier LtdItem Static stability and vibration behavior of graphene platelets reinforced porous sandwich cylindrical panel under non-uniform edge loads using semi-analytical approach(Elsevier Ltd, 2022) Twinkle, C.M.; Jeyaraj, J.Buckling and free vibration characteristics of sandwich cylindrical panel with porous functionally graded graphene platelets (FG-GPL) core are investigated using semi-analytical approach. The effective mechanical properties are obtained by using properties of open cell foams and Halpin–Tsai micro mechanical model. The governing equations are obtained using Hamilton's principle, considering a higher order theory to account the transverse shear and solved by Galerkin's method. Effects of nature of in-plane edge load, distribution of porosity and GPL, porosity coefficient, GPL loading, core to total thickness ratio are analyzed in detail. It is shown that for a FG-GPL core sandwich cylindrical panel with high core thickness, even at higher amount of porosity the buckling resistance and free vibration frequency can be improved by properly tailoring both the GPL and porosity distribution. Moreover, a much variation in buckling and free vibration response with the type of in plane loading is observed and evident mode shape changes are observed with increase in aspect ratio. The cylindrical sandwich panel having a core with D-PD porosity variation and I-GPL-P pattern of GPL distribution has the maximum buckling resistance and free vibration frequency value. © 2021 Elsevier LtdItem Sound absorption and transmission loss characteristics of 3D printed bio-degradable material with graded spherical perforations(Elsevier Ltd, 2022) Sailesh, R.; Yuvaraj, L.; Doddamani, M.; Mailan Chinnapandi, L.B.M.; Jeyaraj, J.The influence of spherical bubble perforations and their grading on acoustic characteristics of a 3D printed bio-degradable material is investigated. Samples with spherical bubble perforations of different sizes are distributed either uniformly or graded across the specimen thickness. A sample having typical cylindrical perforations is also analyzed for comparative analysis. Sound absorption (SA) and sound transmission loss (STL) characteristics are estimated by the impedance tube method. The results reveal that the SA of all functionally graded (FG) perforations is higher at low frequencies. The SA and bandwidth are higher for a specimen with uniform, lower diameter bubbles at higher frequencies. The STL of FG perforations is highest among the specimens, and the difference increases significantly with frequency. The numerical and experimental results match a high degree of accuracy. FG perforations exhibited superior performance for both SA and STL. The proposed graded spherical porosity can be effectively utilized in soundproofing applications across building and transportation sectors. © 2021 Elsevier LtdItem Thermal buckling and vibro-acoustic behaviour of functionally graded graphene polymer layered composites subjected to in-plane temperature variance(SAGE Publications Ltd, 2022) John, B.O.; Hassan, F.U.; George, N.; Chacko, T.; Bhagat, V.S.; Jeyaraj, J.; Kiran Kumar Reddy, R.The current study reports the thermal buckling, vibration and acoustic characteristics of functionally graded graphene polymer layer composite plates subjected to the in-plane temperature variance. The macroscopic properties of the composites are evaluated using the modified rule of mixtures to compute the layer-wise properties of an functionally graded graphene polymer layer composite plate. The critical buckling temperature is computed and compared for various functional gradings, boundary conditions and in-plane temperature variances. The in-plane temperature variance showed a major impact on the critical thermal buckling temperature and respective mode shapes. The vibro-acoustic behaviour of the functionally graded graphene polymer layer composite plate is investigated and documented keeping critical buckling temperature as a function. With an increase in thermal load and the nature of in-plane temperature variance, the vibro-acoustic results showed significant difference in velocity and acoustic response. For functionally graded graphene polymer layer composite plate with one free edge, the difference was statistically significant as indicated by an octave band plot. We conclude that the portion of the functionally graded graphene polymer layer composite plate that is subjected to the higher temperature in an in-plane temperature variance, as well as the nature of the boundary conditions may exacerbate the effect of in-plane temperature variance and are crucial in predicting vibro-acoustic characteristics. © IMechE 2022.Item Vibro-acoustics of functionally graded porous beams subjected to thermo-mechanical loads(Techno-Press, 2022) Mailan Chinnapandi, M.C.L.; Jeyaraj, J.; Eltaher, M.A.This manuscript work presents a comprehensive continuum model capable to investigate the effect of porosity on vibro-acoustic behaviour of functionally graded (FG) beams resting on an elastic foundation subjected to thermal and mechanical loadings. Effects of uniform temperature rise and edge compressive load on the sound radiation characteristics are studied in a comparative manner. The numerical analysis is carried out by combining finite element method with Rayleigh’s integral. Detailed parametric studies are accomplished, and influences of power law index, porosity volume, porosity distribution and boundary conditions on the vibro-acoustic response characteristics are analyzed. It is found that the vibroacoustic response under mechanical edge compression is entirely different compared to from that under the thermal load. Furthermore, nature of grading of porosity affects the sound radiation behaviour for both the loads. The proposed model can be used to obtain the suppression performance of vibration and noise FG porous beams under thermal and mechanical loads. © © 2022 Techno-Press, Ltd.Item Stability and dynamic behavior of porous FGM beam: influence of graded porosity, graphene platelets, and axially varying loads(Springer Science and Business Media Deutschland GmbH, 2022) Priyanka, R.; Twinkle, C.M.; Jeyaraj, J.This paper investigates the free vibration and buckling behaviors of functionally graded graphene platelets (FG-GPLs) reinforced porous beam under axially variable loads. The internal pores and GPLs are either uniformly or non-uniformly distributed along the thickness direction. Halpin–Tsai micromechanics model is used to calculate the effective elastic modulus. The variation of Poisson’s ratio along the thickness and the relation between mass density and porosity coefficients are determined using mechanical properties of closed-cell solid under the Gaussian random scheme. The equilibrium equations are derived by Hamilton’s principles, and critical buckling load and dimensionless natural frequency are determined by Ritz formulation. Results revealed that buckling and free vibration behavior of the porous FG-GPL beam are influenced by the GPLs grading pattern and the type of axially varying load. Furthermore, the grading pattern of porosity has more influence on the buckling behavior compared to the free vibration behavior. It is also observed that buckling mode and the fundamental vibration mode of the porous FG-GPL are influenced by the loading conditions and remain unaffected by the grading pattern of porosities and GPLs. © 2021, The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature.Item Buckling behavior of non-uniformly heated 3D printed plain and functionally graded nanocomposites(John Wiley and Sons Inc, 2023) Kumar, S.; Ramesh, M.R.; Jeyaraj, J.; Powar, S.; Doddamani, M.The functionalized multi-walled carbon nanotubes (MWCNTs) (0.5–5 wt.%) are compounded with high density polyethylene (HDPE), and, subsequently, used for extruding nanocomposite filaments to fabricate nanocomposites (NCs) and functionally graded nanocomposites (FGNCs) through 3D printing. The 3D printed NCs are investigated for coefficient of thermal expansion (CTE), and buckling under different non-uniform temperature distributions (case-1: left edge heating, case-2: centre heating, and case-3: left and right edge heating). A significant reduction in CTE is observed with MWCNT addition and gradation. The highest reduction in CTE is observed for H5 (5 wt.% of MWCNT in HDPE) NC and H1 ⟶ H3 ⟶ H5 (FGNC-2) among the NCs and the FGNCs. It is noted that Tcr (critical buckling temperature) is highest for case-3 and lowest for case-2. The highest deflection is noticed in case-2, while no significant difference is observed in case-1 and case-3 heating conditions. It is also observed that Tcr increases with gradation and MWCNTs addition. The H5 NC and FGNC-2 exhibited the highest Tcr among the NCs and FGNCs, respectively. The maximum deflection is noticed for HDPE, whereas the minimum deflection is noticed for FGNC-2 and H-5 NC among the tested samples. The results also revealed that Tcr is very sensitive to type of heating. © 2023 Society of Plastics Engineers.Item Dynamic response of 3D printed functionally graded sandwich foams(Emerald Publishing, 2023) Bonthu, D.; Bharath, B.; Bekinal, S.I.; Jeyaraj, J.; Doddamani, M.Purpose: The purpose of this study was to introduce three-dimensional printing (3DP) of functionally graded sandwich foams (FGSFs). This work was continued by predicting the mechanical buckling and free vibration behavior of 3DP FGSFs using experimental and numerical analyses. Design/methodology/approach: Initially, hollow glass microballoon-reinforced high-density polyethylene-based polymer composite foams were developed, and these materials were extruded into their respective filaments. These filaments are used as feedstock materials in fused filament fabrication based 3DP for the development of FGSFs. Scanning electron microscopy analysis was performed on the freeze-dried samples to observe filler sustainability. Furthermore, the density, critical buckling load (Pcr), natural frequency (fn) and damping factor of FGSFs were evaluated. The critical buckling load (Pcr) of the FGSFs was estimated using the double-tangent method and modified Budiansky criteria. Findings: The density of FGSFs decreased with increasing filler percentage. The mechanical buckling load increased with the filler percentage. The natural frequency corresponding to the first mode of the FGSFs exhibited a decreasing trend with an increasing load in the pre-buckling regime and an increase in post-buckled zone, whereas the damping factor exhibited the opposite trend. Originality/value: The current research work is valuable for the area of 3D printing by developing the functionally graded foam based sandwich beams. Furthermore, it intended to present the buckling behavior of 3D printed FGSFs, variation of frequency and damping factor corresponding to first three modes with increase in load. © 2023, Emerald Publishing Limited.